[PATCH v10 11/16] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

[Colin Huang <u8813345@gmail.com>]

From: Rex Fu <rex.fu.amd@gmail.com>

Specify the 3.3 V auxiliary rail as the SPI flash VCC supply to
avoid using the dummy regulator during device initialization.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
index 5f9cfeec39cb..e429f7be46db 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
@@ -92,7 +92,7 @@ memory@80000000 {
 		device_type = "memory";
 	};
 
-	regulator-p3v3-bmc-aux {
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-max-microvolt = <3300000>;
@@ -170,6 +170,7 @@ &fmc {
 	flash@0 {
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		vcc-supply = <&p3v3_bmc_aux>;
 		m25p,fast-read;
 
 		status = "okay";
@@ -179,6 +180,7 @@ flash@0 {
 	flash@1 {
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		vcc-supply = <&p3v3_bmc_aux>;
 		m25p,fast-read;
 
 		status = "okay";
@@ -1073,6 +1075,7 @@ flash@0 {
 		spi-max-frequency = <12000000>;
 		spi-rx-bus-width = <2>;
 		spi-tx-bus-width = <2>;
+		vcc-supply = <&p3v3_bmc_aux>;
 
 		status = "okay";
 	};

-- 
2.34.1