From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=pass header.oldest-pass=0 smtp.remote-ip=100.103.45.18 ARC-Seal: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=pass; t=1793268767; b=WPWZHaO3MfZVyp71LFEa76bUPJIo8pXISfbiW1HExoCXTBiasQ0LIIfgRsh1KSMaLfyw JK8LNQ6039zrsS0Eygl6Z2q0mhjDOeOwsoI7FmIeiqS+JRN4p2SfEin//ryAnx/3vxG+P yMCr0VdQYCeDm+2NsuNB9s42WIY7sMx4vEg5kulFnPkbW9a2sOXHLOahU60QVviZd9/qs YMjCMaIV13n9v43x9cCyFlk/OJ5GE+NlZtjW11TAMt+c8RwI/W2DnyZ8bNeH+F6hE6ynF swYWD1/wLom94rkZaU73Phl4sfqmyh1TuKgmQYEJgdbd2C/6131Zroxz0IPeA8EhQeg== ARC-Message-Signature: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1793268767; h=Received:DKIM-Signature:Received:From:Subject:Date:Message-Id: MIME-Version:Content-Type:Content-Transfer-Encoding:X-B4-Tracking: X-Change-ID:To:Cc:X-Mailer:X-Developer-Signature:X-Developer-Key: X-Endpoint-Received:X-Original-From:Reply-To; bh=IVuF2oN/r39OxHk9NHOVV2HH2o8ZKe62/0ZAOyxxOmc=; b=NM3xb7OalLT+4uU4/iFpAChb0lRLmYfThwl8R7dl4weoqxrJIZSe4CGMaJesIYS8kwGa AKdKLNV+92UrLVTwl9CepSvcagk3Loj2O6LNWM2qZPU8hO4HHlRe4U4DfwJJ/IvUk97NP O9HgAf2Oqf4suUDWCEHNlf0d4NHvoLYjCoOVXvBeRAbjgVk1GGuc8CqIUbA5mPa/I0M/c YPpi/N9T2gPH+xVhFn2rX2nFBznkVrxbbZgkJNNCeur37Z93fHs2MRD2diUXFXTON3+hk W34EuEPdDaORLLOl4bgq96wpZj3Ravyp0c2pETMyf7eRg9+xgL6qZ6X0fuiUTiSZiZw== ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dkim=pass header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20260515 header.b=euhgcILv; arc=pass header.oldest-pass=0 smtp.remote-ip=100.103.45.18 Received: from smtp.kernel.org (quasi.space.kernel.org [100.103.45.18]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 336CA606A31D; Thu, 29 Oct 2026 10:12:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key, unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20260515 header.b=euhgcILv Authentication-Results: smtp.kernel.org; arc=none smtp.remote-ip=100.80.115.77 ARC-Seal: i=1; d=kernel.org; s=arc20260519; a=rsa-sha256; cv=none; t=1793268767; b=rGQ0goCapDTfH8Haii1ElvwwyaTdexGpzSdYTyM5YDdNzMDxd/dLWN6WgJJlKZBG+f6V 7LoH79KY8gHKio4hhDDGRvC4TEW90VSUwzrBJRk3ygwfNcAFRF3XIHeNd7zpyMkkp/n3B ERjaVAsJ9C0HEyXmC+hWtimyDZ+V+a4OeRRvce1lsIziGZ02XXi+3N+D4NTW+GXNSzq0b MO+3PL31mFq/WhHnDnsLQH+c+Hq/Bini17piBk4i8RXHmI75X24zYtjxxfk2/fanS1hpi R4b1DXbVeqiH6xnWgePBR4hC8igi6xzwr9Kymaq2KXCbzJsxxky53s8TWBJTK9TqiGA== ARC-Message-Signature: i=1; d=kernel.org; s=arc20260519; a=rsa-sha256; c=relaxed/relaxed; t=1793268767; h=DKIM-Signature:Received:From:Subject:Date:Message-Id:MIME-Version: Content-Type:Content-Transfer-Encoding:X-B4-Tracking:X-Change-ID:To: Cc:X-Mailer:X-Developer-Signature:X-Developer-Key:X-Endpoint-Received: X-Original-From:Reply-To; bh=IVuF2oN/r39OxHk9NHOVV2HH2o8ZKe62/0ZAOyxxOmc=; b=U8wKkgr9XdDlkoFpdi17E01HIedb6gomYk0KDMkllfyzcIJ1adtd+GPZz1UhUPjXs88J RDpP1bfy3Flgu3+XQoSft2y0VIe8GkR8pZ9b17uAq1MqFBhL0a4Dzq+VSgbRXAOAlr2g3 mVdHvnTgv3J70YqpZDt7QTn+adsl6BNy9uexq6aNbg3l8Rr+qBBmUt4qYtKX/wqVBF/q2 Ou2V+iSkkjs9OzznUlwlUgFUY4LKIyzpgX7BqyE/PF/KlywcZNAnPWMNfOOEL2VnLWv8w sEY7TZFzS5g4MrOmwav+D6JRqWUCVRF63Xzu+wRG7X8fhdD0u/rahi1I/BARiEjoScQ== ARC-Authentication-Results: i=1; smtp.kernel.org; arc=none smtp.remote-ip=100.80.115.77 Received: from lkml.kernel.org (nexus.subspace.kernel.org [100.80.115.77]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.kernel.org (Postfix) with ESMTPS id 16DCB1F01825; Thu, 29 Oct 2026 10:12:46 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=kernel.org; s=k20260515; t=1793268766; bh=IVuF2oN/r39OxHk9NHOVV2HH2o8ZKe62/0ZAOyxxOmc=; h=From:Subject:Date:To:Cc:Reply-To; b=euhgcILvEgkmtdh2gbzdamosIfydabEEZd3wHU+SKyPFVhyLYPcYRizSxwZ1r+7w0 GhOVXEnKZ0HAC/K1yYs6GGLkXVIN84c7nE3UvEtmqvPc4+ngLv9EB+nrR740hzmLVJ I9XIl3MSrwQ6gqnP7OY1NtV9USR8kJm4X0fQVruCqtifNcjGtOLb6UWmHTaqTYNaGj w096xJo5lNKrMVvQDoR6Hnik/TQpZN8GFIfO2XFmYUBmqcqC2jHSanSm2++Wrk0dFV y/5YJo2zHKDTaGSt5Ukmzt6QHADPO9Y+4IhlXkgCR4S/MLfgjjnBgAu6DOLQaO4TYf d63eE0W3cliqA== Received: from nexus.subspace.kernel.org (localhost [IPv6:::1]) by lkml.kernel.org (Postfix) with ESMTP id 6B8CE457ED; Thu, 29 Oct 2026 10:12:45 +0000 (UTC) From: Hermes Wu via B4 Relay Subject: [PATCH v5 0/2] Add ITE IT6162 MIPI DSI to HDMI bridge driver Date: Thu, 29 Oct 2026 18:12:29 +0800 Message-Id: <20261029-upstream-6162-v5-0-8369f9e5afe6@ite.com.tw> X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit X-B4-Tracking: v=1; b=H4sIAA0c42oC/3XNyw7CIBAF0F9pWIvhJaAr/8O4KMNgWWgbwKox/ XfRjY/G5Z3MufdOMqaImWyaO0k4xhz7Uw2rRUOga08HpNHXTAQTmgkh6XnIJWF7pJprQaVZcTT WB2g9qWZIGOL11bfb19zFXPp0e9WP/Hn91zRyyig6AK0BHA+4jQWX0B+X5UKeVaN4c8nWv1xU7 tF5p8Ha+jDj8oPz2bqs3Kq1Cc6AUkzPuPrks3VVuRHaKisxMOm/+DRNDyZnrXxoAQAA X-Change-ID: 20260223-upstream-6162-3751e78dfcad To: Andrzej Hajda , Neil Armstrong , Robert Foss , Laurent Pinchart , Jonas Karlman , Jernej Skrabec , David Airlie , Simona Vetter , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Luca Ceresoli Cc: Pet.Weng@ite.com.tw, Kenneth.Hung@ite.com.tw, Hermes Wu , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Dmitry Baryshkov , Hermes Wu X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1793268764; l=9031; i=Hermes.wu@ite.com.tw; s=20241230; h=from:subject:message-id; bh=yJH7FtZvNZDml9iZjLPMB66iKpCXjr37vKQnfvmPxm0=; b=cEFrgiTBsiD4urhm7tMVF2pJWZY/84/LmAsL+GrmMUQiea9wZoU3LXFqMPj+HLiffxkMuG1kD 4EqewlACKUMDaixfZj2Qx9FgveHaKw6eMnqXhObybtff8RSnjSrP/GA X-Developer-Key: i=Hermes.wu@ite.com.tw; a=ed25519; pk=qho5Dawp2WWj9CGyjtJ6/Y10xH8odjRdS6SXDaDAerU= X-Endpoint-Received: by B4 Relay for Hermes.wu@ite.com.tw/20241230 with auth_id=310 X-Original-From: Hermes Wu Reply-To: Hermes.wu@ite.com.tw This patch series adds support for the ITE IT6162 MIPI DSI to HDMI bridge chip. The IT6162 is an I2C-controlled bridge that receives MIPI DSI input and outputs HDMI signals. The device supports the following configurations: - Single MIPI DSI input: up to 4K @ 30Hz - Dual MIPI DSI input (combined): up to 4K @ 60Hz This series introduces: - dt-bindings: Add YAML binding document for ITE IT6162 - drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver Signed-off-by: Hermes Wu --- Changes in v5: - Move per-patch changelogs into the cover letter - Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml: * Use 1-based data-lanes numbering as lane 0 is the D-PHY clock lane, revert example to <1 2 3 4> * Constrain data-lanes to in-order lanes or full reversal <4 3 2 1> * Document port@1 as the preferred port for a single MIPI DSI input * Keep port@0 and port@3 optional: a single MIPI DSI input uses port@1, and the HDMI connector is created for the bridge without a port@3 link * Keep a single endpoint node per MIPI DSI port, as other bridge bindings based on port-base do * Drop Reviewed-by tag due to above changes - drivers/gpu/drm/bridge/ite-it6162.c: * Detect lane reversal from 1-based data-lanes (data_lanes[0] == 4) * Rebase on drm-misc-next: use struct drm_atomic_commit in atomic_enable/atomic_disable, replace .atomic_reset with .atomic_create_state, pass DRM_OUTPUT_COLOR_FORMAT_RGB444 to drm_hdmi_compute_mode_clock() * Take the colorspace sent to firmware from the AVI infoframe instead of conn_state->hdmi.output_format, which is no longer enum hdmi_colorspace * Enable the supplies once, while detecting the chip, and disable them through devres on removal and on every probe failure; unwind a partially failed enable in the power-down order; propagate it6162_poweron() errors and drop the unused it6162_poweroff() * Power up ivdd, wait at least 1 ms, then ovdd1833 and ovdd, and power down in the reverse order with the same wait before ivdd * Rename it6162_poweron() to it6162_hw_start() and the power_on flag to hw_ready, as the function no longer enables the supplies: it resets and configures the chip, then enables the interrupt and connector status reporting * Order teardown with devres: initialise the (devm managed) mutex, wait queue and HDCP work first, and register the bridge before the HDCP work cancel action and the IRQ, so the IRQ is freed and the work cancelled before the bridge is removed; drop .remove() * Hold it6162->lock while writing or clearing an infoframe through the data buffer * Update the HDCP content protection property from a dedicated work holding connection_mutex, and drop updates for an HDCP session that has already ended * Zero-initialise the video settings and set the HSync/VSync polarity and scan mode bits as the programming guide defines them, which also fixes the inverted VSync polarity * Check regmap read results before using the data read * Name the chip ID and version register offsets as in the programming guide (register 0x00 is the most significant ID byte); the ID check is unchanged * Document that the firmware is given the HDMI output timing from the requested mode, not the MIPI input timing in adjusted_mode * Drop the endpoint node reference on the data-lanes error path * Get the chip info with i2c_get_match_data(), add it to the I2C ID table and fail probe if it is missing * Honour the requested length when reading an EDID block * Leave the cached HPD state to the IRQ thread instead of updating it from detect * Drop Reviewed-by tag due to above changes - Link to v4: https://lore.kernel.org/r/20260319-upstream-6162-v4-0-7268483ef03d@ite.com.tw Changes in v4: - Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml: * Drop ite,support-hdcp * Drop endpoint properties already in video-interfaces.yaml * Fix data-lanes in example with <0 1 2 3> * Add blanking line in example before endpoint subnode starts * Add reset-gpio and power controls to required - drivers/gpu/drm/bridge/ite-it6162.c: * Drop struc it6162_audio * Add HDCP_AUTO in enum hdcp_ver{}, FW enable HDCP by sink capability. * Call drm_atomic_helper_connector_hdmi_clear_audio_infoframe() in it6162_bridge_hdmi_audio_shutdown() * Drop it6162_bridge_hdmi_audio_startup() * Add hdmi_clear_hdmi_infoframe and hdmi_write_hdmi_infoframe * Drop it6162_parse_dt() due to "ite,support-hdcp" is removed from DT. * add DRM_BRIDGE_OP_HDMI to it6162->bridge.ops - Link to v3: https://lore.kernel.org/r/20260313-upstream-6162-v3-0-8497fb7c4406@ite.com.tw Changes in v3: - Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml: * Fix lane-polarities: remove $ref redefinition, allow via video-interfaces.yaml * Improve ite,support-hdcp description to clarify FW-based HDCP behavior * Remove descriptions repeating schema constraints * Remove stray comment in ports required section * Fix data-lanes spacing in example: <1 2 3 4> * Add missing newline at end of file * Add missing change log that Reviewed-by tag was removed when V1->V2 - drivers/gpu/drm/bridge/ite-it6162.c: * Fix OFFSET_VERSION_H register offset from 0x03 to 0x05 * Add MIPI_PORT_EN_MASK macro combining MIPI_PORT1_EN_MASK and MIPI_PORT0_EN_MASK * Rename HDCP enums: NO_HDCP -> HDCP_DISABLE, NO_HDCP_STATE -> HDCP_STATE_IDLE, AUTH_DONE -> HDCP_STATE_AUTH_DONE, AUTH_FAIL -> HDCP_STATE_AUTH_FAIL * Rename it6162_infoblock_complete() to it6162_wait_command_complete() * Rename it6162_infoblock_host_set() to it6162_infoblock_trigger() * Remove it6162_infoblock_mipi_config() and it6162_infoblock_write_msg() wrappers, inline into it6162_reset_init() and it6162_mipi_set_video_timing() respectively * Remove it6162_set_default_config() wrapper, inline into it6162_reset_init() * Fix typo: hdcp_encyption -> hdcp_encryption * Fix typo: it6162_hdcp_read_infomation -> it6162_hdcp_read_information * Remove dev_err_probe() usage outside of probe path * Remove verbose success-path dev_info/dev_dbg logging throughout * Replace __func__ usage in error messages with descriptive strings * Fix double error printing in probe for it6162_init_pdata failure path * Fix uninitialized variable warning: initialize cp_status to DRM_MODE_CONTENT_PROTECTION_DESIRED at declaration; move drm_hdcp_update_content_protection() inside the state-change block * Fix audio sample width mapping: case 20 now maps to WORD_LENGTH_20BIT, case 24 to WORD_LENGTH_24BIT * Remove stray drm_dbg("it6162_bridge_atomic_disable") call * Remove drm_dbg() calls from it6162_display_mode_to_settings() * Drop unused struct it6162 * parameter from it6162_avi_to_video_setting() and it6162_display_mode_to_settings() * Fold it6162_set_default_config() body directly into it6162_reset_init(), removing the wrapper * it6162_infoblock_request_data(): split command complete polling and buffer status check into two steps; use wait_event_timeout() for data_buf_sts since it is updated asynchronously by the interrupt handler; add wait_queue_head_t data_buf_wait to struct it6162 and wake_up() in interrupt handler - Link to v2: https://lore.kernel.org/r/20260309-upstream-6162-v2-0-debdb6c88030@ite.com.tw Changes in v2: - dt-bindings: * Drop Reviewed-by tag due to below changes * Add property "ite,spport-hdcp" to enable HDCP * Add property "lane-polarities" and "clock-noncontinuous" for DSI setting - drm/bridge: * Drop unused element in struct it6162 * Remove regmap wrappers * Use FIELD_PREP for bitfield operations * Update HDCP status with drm_hdcp_update_content_protection() * Add AVI, AUDIO, and SPD infoframe control * Remove conversion from drm_display_mode to videomode * Fix regulator/gpio error handling in it6162_init_pdata() to return proper error codes - MAINTAINERS * squash to driver patch - Link to v1: https://lore.kernel.org/r/20260223-upstream-6162-v1-0-ebcc66ccb1fe@ite.com.tw --- Hermes Wu (2): dt-bindings: display: bridge: Add ITE IT6162 MIPI DSI to HDMI bridge drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver .../bindings/display/bridge/ite,it6162.yaml | 205 +++ MAINTAINERS | 7 + drivers/gpu/drm/bridge/Kconfig | 17 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/ite-it6162.c | 1764 ++++++++++++++++++++ 5 files changed, 1994 insertions(+) --- base-commit: 33ed26235db93162935d1719bc6f538c384a2fd8 change-id: 20260223-upstream-6162-3751e78dfcad Best regards, -- Hermes Wu