[PATCH 07/14] media: qcom: camss: csid-680: Enable RDI SOF tracking

[bryan.odonoghue@linaro.org]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Similarly to the sm8650 we can quite easily switch on V4L2_EVENT_FRAME_SYNC
for x1e/x2e which uses csid-680.

Do so now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-csid-680.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csid-680.c b/drivers/media/platform/qcom/camss/camss-csid-680.c
index 345a67c8fb947..452640e72f6d5 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-680.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-680.c
@@ -296,6 +296,20 @@ static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8
 	writel(val, csid->base + CSID_RDI_CFG0(port));
 }
 
+static void __csid_configure_rdi_irq(struct csid_device *csid, u8 enable, u8 rdi)
+{
+	u32 val;
+
+	val = readl(csid->base + CSID_CSI2_RDIN_IRQ_MASK(rdi));
+
+	if (enable)
+		val |= CSID_CSI2_RDIN_INFO_INPUT_SOF;
+	else
+		val &= ~CSID_CSI2_RDIN_INFO_INPUT_SOF;
+
+	writel(val, csid->base + CSID_CSI2_RDIN_IRQ_MASK(rdi));
+}
+
 static void csid_configure_stream(struct csid_device *csid, u8 enable)
 {
 	int i;
@@ -307,6 +321,7 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
 		if (csid->phy.en_vc & BIT(i)) {
 			__csid_configure_rdi_stream(csid, enable, i, 0);
 			__csid_configure_rx(csid, &csid->phy, 0);
+			__csid_configure_rdi_irq(csid, enable, i);
 			__csid_ctrl_rdi(csid, enable, i);
 		}
 	}
@@ -395,6 +410,9 @@ static irqreturn_t csid_isr(int irq, void *dev)
 		if (val)
 			writel(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
 
+		if (val & CSID_CSI2_RDIN_INFO_INPUT_SOF)
+			csid_sof_event(csid, i);
+
 		if (val & CSID_CSI2_RDIN_RUP_DONE)
 			csid_rup_complete(csid, i);
 

-- 
2.56.0