[PATCH v2 2/6] arm64: dts: qcom: milos-nothing-asteroids: Enable UFS

[Alexander Koskovich <akoskovich@pm.me>]

Configure and enable the nodes for UFS, so that we can access the
internal storage.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
---
 arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts b/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts
index 787acef4a4c8..fa0cbf78b69a 100644
--- a/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts
+++ b/arch/arm64/boot/dts/qcom/milos-nothing-asteroids.dts
@@ -905,6 +905,24 @@ &uart5 {
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l12b>;
+	vcc-max-microamp = <800000>;
+	vccq2-supply = <&vreg_l4f>;
+	vccq2-max-microamp = <750000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l2b>;
+	vdda-pll-supply = <&vreg_l4b>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	/* USB 2.0 only, HW does not support USB 3.x */
 	qcom,select-utmi-as-pipe-clk;

-- 
2.55.0