[PATCH ath-next 0/3] wifi: ath12k: accept what newer QCN9274 firmware requests at boot

[Goran Sustek <gsustek@gmail.com>]

With QCN9274 firmware WLAN.WBE.1.6-01243 (the newest in
ath12k-firmware) the driver logs three warnings at every boot:

  ath12k_wifi7_pci 0000:06:00.0: memory type 10 not supported
  ath12k_wifi7_pci 0000:06:00.0: Invalid module id 2
  ath12k_wifi7_pci 0000:06:00.0: failed to parse tlv -22

The firmware is not at fault: it requests the AFC memory region
(QMI memory type 10) and advertises a direct buffer ring for CV
upload (module 2), both defined in Qualcomm's interface headers but
not yet known to the driver.

Patch 1 allocates the AFC region instead of answering with a NULL
address. Patch 2 makes the DMA ring capability parser skip unknown
module IDs instead of aborting the event, and fixes the zero-filled
entry a plain skip would leave. Patch 3 names modules 2 and 3.

The idea of patch 2 was posted earlier by Nazar Mokrynskyi:
https://lore.kernel.org/linux-wireless/20260505172415.566328-3-nazar@mokrynskyi.com/

Tested on a QCN9274 hw2.0 PCI board (single device, AP MLD on 5 GHz
and 2.4 GHz) with the series on top of v7.3.1: all three warnings are
gone, the device comes up with both links, and there is no firmware
crash, call trace or IOMMU fault.

Goran Sustek (3):
  wifi: ath12k: allocate the AFC memory region requested by firmware
  wifi: ath12k: skip unknown direct buffer ring module IDs
  wifi: ath12k: name direct buffer ring modules 2 and 3

 drivers/net/wireless/ath/ath12k/qmi.c |   17 +++++++++++++
 drivers/net/wireless/ath/ath12k/qmi.h |    3 ++
 drivers/net/wireless/ath/ath12k/wmi.c |   43 +++++++++++++++++++++------------
 drivers/net/wireless/ath/ath12k/wmi.h |    2 ++
 4 files changed, 50 insertions(+), 15 deletions(-)


base-commit: 7b14c8f4a9615579b09cbcdc4515b65ae6124753
--
2.47.0