From: Ho Jie Feng <hjf3108@gmail.com>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: linux-wireless@vger.kernel.org, Ho Jie Feng <hjf3108@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH rtw-next v2 2/7] wifi: rtw88: 88xxa: receive VHT SU beamformed transmissions
Date: Sat, 31 Oct 2026 15:09:42 +0800 [thread overview]
Message-ID: <20261031070950.425176-3-hjf3108@gmail.com> (raw)
In-Reply-To: <20261031070950.425176-1-hjf3108@gmail.com>
Implement beamformee support for 88xxa since they have
support for it.
Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
drivers/net/wireless/realtek/rtw88/bf.h | 2 +
drivers/net/wireless/realtek/rtw88/reg.h | 1 +
drivers/net/wireless/realtek/rtw88/rtw8812a.c | 3 +-
drivers/net/wireless/realtek/rtw88/rtw8814a.c | 36 ++++++++++-
drivers/net/wireless/realtek/rtw88/rtw8821a.c | 3 +-
drivers/net/wireless/realtek/rtw88/rtw88xxa.c | 62 +++++++++++++++++++
drivers/net/wireless/realtek/rtw88/rtw88xxa.h | 2 +
7 files changed, 104 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/bf.h b/drivers/net/wireless/realtek/rtw88/bf.h
index a5d3010e6be6ef776b1c604207f68d6331721feb..0aa78fb6a7e64435e4d5fc18f3e9c70a01d73135 100644
--- a/drivers/net/wireless/realtek/rtw88/bf.h
+++ b/drivers/net/wireless/realtek/rtw88/bf.h
@@ -12,6 +12,8 @@
#define REG_ASSOCIATED_BFMER0_INFO 0x06E4
#define REG_ASSOCIATED_BFMER1_INFO 0x06EC
#define REG_TX_CSI_RPT_PARAM_BW20 0x06F4
+#define REG_TX_CSI_RPT_PARAM_BW40 0x06F8
+#define REG_TX_CSI_RPT_PARAM_BW80 0x06FC
#define REG_SND_PTCL_CTRL 0x0718
#define BIT_DIS_CHK_VHTSIGB_CRC BIT(6)
#define BIT_DIS_CHK_VHTSIGA_CRC BIT(5)
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index afcdb66fdb9a11a44bf52c790aea2cc69aeb851c..f8ec1e2931f63a06a72626bf3168256728ed933b 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -671,6 +671,7 @@
#define REG_IQK_COM96 0x0984
#define REG_FAS 0x09a4
+#define REG_CSI_CONTENT_VALUE 0x09b4
#define REG_RXSB 0x0a00
#define BIT_RXSB_ANA_DIV BIT(15)
#define REG_CCK_RX 0x0a04
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8812a.c b/drivers/net/wireless/realtek/rtw88/rtw8812a.c
index 55f1d3d3240be24580bdc4a7b3456b8ff8340e70..5d58dff4fcee7c4b3194794266cb48cd472014f9 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8812a.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8812a.c
@@ -931,7 +931,7 @@ static const struct rtw_chip_ops rtw8812a_ops = {
.phy_calibration = rtw8812a_phy_calibration,
.cck_pd_set = rtw_phy_cck_pd_set,
.pwr_track = rtw8812a_pwr_track,
- .config_bfee = NULL,
+ .config_bfee = rtw88xxa_bf_config_bfee,
.set_gid_table = NULL,
.cfg_csi_rate = NULL,
.led_set = rtw8812a_led_set,
@@ -1084,6 +1084,7 @@ const struct rtw_chip_info rtw8812a_hw_spec = {
.old_datarate_fb_limit = true,
.usb_tx_agg_desc_num = 1,
.iqk_threshold = 8,
+ .bfer_su_max_num = 2,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8814a.c b/drivers/net/wireless/realtek/rtw88/rtw8814a.c
index 5bb55606f14a126806acb354658c150150ae0cce..2db05a83766d65123edc95f50a40d3f93bfb1dba 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8814a.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8814a.c
@@ -4,6 +4,7 @@
#include <linux/usb.h>
#include "main.h"
+#include "bf.h"
#include "coex.h"
#include "tx.h"
#include "phy.h"
@@ -115,10 +116,13 @@ static void rtw8814a_init_hwcap(struct rtw_dev *rtwdev)
BIT(RTW_CHANNEL_WIDTH_80);
efuse->hw_cap.ptcl = EFUSE_HW_CAP_PTCL_VHT;
- if (hal->rf_type == RF_3T3R)
+ if (hal->rf_type == RF_3T3R) {
efuse->hw_cap.nss = 3;
- else
+ hal->bfee_sts_cap = 2;
+ } else {
efuse->hw_cap.nss = 2;
+ hal->bfee_sts_cap = 1;
+ }
rtw_dbg(rtwdev, RTW_DBG_EFUSE,
"hw cap: hci=0x%02x, bw=0x%02x, ptcl=0x%02x, ant_num=%d, nss=%d\n",
@@ -2039,6 +2043,31 @@ static void rtw8814a_led_set(struct led_classdev *led,
rtw_write32(rtwdev, REG_GPIO_PIN_CTRL_2, led_gpio_cfg);
}
+#define RTW_NDP_RX_STANDBY_TIME_8814A 0x40
+#define RTW_SND_CTRL_SOUNDING_8814A 0xDB
+
+static void rtw8814a_bf_enable_bfee_su(struct rtw_dev *rtwdev,
+ struct rtw_vif *vif,
+ struct rtw_bfee *bfee)
+{
+ rtw_bf_enable_bfee_su(rtwdev, vif, bfee);
+
+ rtw_write16(rtwdev, REG_SND_PTCL_CTRL + 1, 0x0202);
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL, RTW_SND_CTRL_SOUNDING_8814A);
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL + 3,
+ RTW_NDP_RX_STANDBY_TIME_8814A);
+}
+
+static void rtw8814a_bf_config_bfee(struct rtw_dev *rtwdev,
+ struct rtw_vif *vif,
+ struct rtw_bfee *bfee, bool enable)
+{
+ if (enable)
+ rtw8814a_bf_enable_bfee_su(rtwdev, vif, bfee);
+ else
+ rtw_bf_remove_bfee_su(rtwdev, bfee);
+}
+
static void rtw8814a_fill_txdesc_checksum(struct rtw_dev *rtwdev,
struct rtw_tx_pkt_info *pkt_info,
u8 *txdesc)
@@ -2068,7 +2097,7 @@ static const struct rtw_chip_ops rtw8814a_ops = {
.phy_calibration = rtw8814a_phy_calibration,
.cck_pd_set = rtw8814a_phy_cck_pd_set,
.pwr_track = rtw8814a_pwr_track,
- .config_bfee = NULL,
+ .config_bfee = rtw8814a_bf_config_bfee,
.set_gid_table = NULL,
.cfg_csi_rate = NULL,
.led_set = rtw8814a_led_set,
@@ -2231,6 +2260,7 @@ const struct rtw_chip_info rtw8814a_hw_spec = {
.rfe_defs = rtw8814a_rfe_defs,
.rfe_defs_size = ARRAY_SIZE(rtw8814a_rfe_defs),
.iqk_threshold = 8,
+ .bfer_su_max_num = 2,
.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
.coex_para_ver = 0,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821a.c b/drivers/net/wireless/realtek/rtw88/rtw8821a.c
index 6096d3b8e41bee6cdc2d05500d2fbeb9e097430e..6d106ae70d9142b45337057311dc423158e7dabc 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821a.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821a.c
@@ -877,7 +877,7 @@ static const struct rtw_chip_ops rtw8821a_ops = {
.phy_calibration = rtw8821a_phy_calibration,
.cck_pd_set = rtw_phy_cck_pd_set,
.pwr_track = rtw8821a_pwr_track,
- .config_bfee = NULL,
+ .config_bfee = rtw88xxa_bf_config_bfee,
.set_gid_table = NULL,
.cfg_csi_rate = NULL,
.led_set = rtw8821a_led_set,
@@ -1188,6 +1188,7 @@ const struct rtw_chip_info rtw8821a_hw_spec = {
.old_datarate_fb_limit = true,
.usb_tx_agg_desc_num = 6,
.iqk_threshold = 8,
+ .bfer_su_max_num = 2,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw88xxa.c b/drivers/net/wireless/realtek/rtw88/rtw88xxa.c
index c298fa0fb2a6b94118527a297affa5e6e8ab633d..87253fffe78cd6f5b58a325eef42b58b968e2d46 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw88xxa.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw88xxa.c
@@ -138,6 +138,7 @@ static void rtw88xxa_read_usb_type(struct rtw_dev *rtwdev)
efuse->hw_cap.nss = 1;
else
efuse->hw_cap.nss = 2;
+ rtwdev->hal.bfee_sts_cap = 1;
if (rtwdev->chip->id == RTW_CHIP_TYPE_8821A)
goto print_hw_cap;
@@ -197,6 +198,67 @@ static void rtw88xxa_read_usb_type(struct rtw_dev *rtwdev)
efuse->hw_cap.ant_num, efuse->hw_cap.nss);
}
+#define RTW_NDP_RX_STANDBY_TIME_88XXA 0x50
+#define RTW_SND_CTRL_REMOVE_88XXA 0xC8
+#define RTW_SND_CTRL_SOUNDING_88XXA 0xCB
+
+void rtw88xxa_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+ struct rtw_bfee *bfee, bool enable)
+{
+ static const u32 csi_rpt_regs[] = {
+ REG_TX_CSI_RPT_PARAM_BW20,
+ REG_TX_CSI_RPT_PARAM_BW40,
+ REG_TX_CSI_RPT_PARAM_BW80,
+ };
+ struct rtw_bf_info *bf_info = &rtwdev->bf_info;
+ u8 slot = bfee->su_reg_index;
+ u32 addr_bfer_info;
+ u32 csi_param;
+ int i;
+
+ if (bfee->role != RTW_BFEE_SU || slot >= 2)
+ return;
+
+ addr_bfer_info = slot ? REG_ASSOCIATED_BFMER1_INFO :
+ REG_ASSOCIATED_BFMER0_INFO;
+
+ rtw_dbg(rtwdev, RTW_DBG_BF, "chip %d SU beamformee %s slot %u\n",
+ rtwdev->chip->id, enable ? "enable" : "disable", slot);
+
+ if (!enable) {
+ rtw_write32(rtwdev, addr_bfer_info, 0);
+ rtw_write16(rtwdev, addr_bfer_info + 4, 0);
+
+ clear_bit(slot, bf_info->bfer_su_reg_maping);
+ bfee->su_reg_index = 0xff;
+
+ if (!bf_info->bfer_su_cnt)
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL,
+ RTW_SND_CTRL_REMOVE_88XXA);
+ return;
+ }
+
+ if (hweight8(rtwdev->hal.antenna_rx) == 2) {
+ rtw_write32(rtwdev, REG_CSI_CONTENT_VALUE, 0);
+ csi_param = 0x01090109;
+ } else {
+ rtw_write32(rtwdev, REG_CSI_CONTENT_VALUE, 0x01081008);
+ csi_param = 0x01080108;
+ }
+
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL,
+ RTW_SND_CTRL_SOUNDING_88XXA);
+ for (i = 0; i < ETH_ALEN; i++)
+ rtw_write8(rtwdev, addr_bfer_info + i, bfee->mac_addr[i]);
+
+ for (i = 0; i < ARRAY_SIZE(csi_rpt_regs); i++)
+ rtw_write32(rtwdev, csi_rpt_regs[i], csi_param);
+
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL + 3,
+ RTW_NDP_RX_STANDBY_TIME_88XXA);
+}
+EXPORT_SYMBOL(rtw88xxa_bf_config_bfee);
+
int rtw88xxa_read_efuse(struct rtw_dev *rtwdev, u8 *log_map)
{
const struct rtw_chip_info *chip = rtwdev->chip;
diff --git a/drivers/net/wireless/realtek/rtw88/rtw88xxa.h b/drivers/net/wireless/realtek/rtw88/rtw88xxa.h
index d9c8db58909cad07b06ab993a08b246b1a9bf74d..0aaf7aa4aafdd396bff25a8fcd880a5514e589ba 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw88xxa.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw88xxa.h
@@ -170,5 +170,7 @@ bool rtw88xxa_iqk_finish(int average, int threshold,
void rtw88xxa_phy_pwrtrack(struct rtw_dev *rtwdev,
void (*do_lck)(struct rtw_dev *rtwdev),
void (*do_iqk)(struct rtw_dev *rtwdev));
+void rtw88xxa_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+ struct rtw_bfee *bfee, bool enable);
#endif
--
2.55.0
next prev parent reply other threads:[~2026-10-31 7:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20261031070950.425176-1-hjf3108@gmail.com>
2026-10-31 7:09 ` [PATCH rtw-next v2 1/7] wifi: rtw88: 8812a, 8814a: enable STBC for HT transmissions Ho Jie Feng
2026-10-31 7:09 ` Ho Jie Feng [this message]
2026-10-31 7:09 ` [PATCH rtw-next v2 3/7] wifi: rtw88: correctly expose beamformee capabilities Ho Jie Feng
2026-10-31 7:09 ` [PATCH rtw-next v2 4/7] wifi: rtw88: prepare frequency-offset correction for more chips Ho Jie Feng
2026-10-31 7:09 ` [PATCH rtw-next v2 5/7] wifi: rtw88: 88xxa: correct carrier-frequency offset Ho Jie Feng
2026-10-31 7:09 ` [PATCH rtw-next v2 6/7] wifi: rtw88: 88xxa: adapt channel sensing to receiver gain Ho Jie Feng
2026-10-31 7:09 ` [PATCH rtw-next v2 7/7] wifi: rtw88: 8812a, 8821a: respect peer A-MPDU size limits Ho Jie Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261031070950.425176-3-hjf3108@gmail.com \
--to=hjf3108@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®