From: Denis Benato <denis.benato@linux.dev>
To: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org, linux-input@vger.kernel.org,
kernel@lists.opengamingcollective.org,
"Benjamin Tissoires" <bentiss@kernel.org>,
"Jiri Kosina" <jikos@kernel.org>,
"Luke D . Jones" <luke@ljones.dev>,
"Mateusz Schwartz" <matthew.schwartz@linux.dev>,
"Denis Benato" <benato.denis96@gmail.com>,
"Jonathan LoBue" <jlobue10@gmail.com>,
"Khamunetri Clark" <khamunetriclark@gmail.com>,
"Derek J. Clark" <derekjohn.clark@gmail.com>,
"Joshua Leivenzon" <hacker1024@users.sourceforge.net>,
"Nathan Chancellor" <nathan@kernel.org>,
"Rebecca Mara Müller" <rebecca.mara@posteo.de>,
"Ivan Levchenko" <me@livan.pro>,
"Corentin Chary" <corentin.chary@gmail.com>,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Denis Benato" <denis.benato@linux.dev>
Subject: [PATCH v12 04/17] HID: asus: add vibration strength configuration
Date: Sat, 31 Oct 2026 17:41:17 +0000 [thread overview]
Message-ID: <20261031174130.208240-5-denis.benato@linux.dev> (raw)
In-Reply-To: <20261031174130.208240-1-denis.benato@linux.dev>
ASUS ROG Ally handhelds support the vibration strength to be configured:
add sysfs attributes to allow userspace configure motors vibration
intensity.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Co-developed-by: Luke Jones <luke@ljones.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
---
drivers/hid/hid-asus.c | 173 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 173 insertions(+)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index 5f5393ea92b7..fe2008f9d51d 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -764,6 +764,9 @@ static struct ally_prefs {
bool xbox_controller_enabled;
u8 gamepad_mode;
+
+ u8 vibration_intensity_left;
+ u8 vibration_intensity_right;
} ally_prefs = {
.lock = __MUTEX_INITIALIZER(ally_prefs.lock),
};
@@ -891,6 +894,154 @@ static ssize_t xbox_controller_store(struct device *dev,
static DEVICE_ATTR_RW(xbox_controller);
+/**
+ * ally_set_vibration_intensity() - Set the gamepad vibration intensity
+ * @hdev: HID device the command packet is sent on
+ * @left: left motor intensity
+ * @right: right motor intensity
+ *
+ * Context: Caller holds ally_prefs.lock.
+ * Return: 0 on success, negative errno on failure.
+ */
+static int ally_set_vibration_intensity(struct hid_device *hdev, u8 left, u8 right)
+{
+ const u8 data[] = { left, right };
+ size_t buf_len;
+ int ret;
+
+ u8 *buf __free(kfree) = ally_alloc_cmd(hdev, CMD_SET_VIBRATION_INTENSITY,
+ data, sizeof(data), &buf_len);
+
+ if (!buf)
+ return -ENOMEM;
+
+ ret = ally_gamepad_send_packet(hdev, buf, buf_len);
+ if (ret < 0) {
+ hid_err(hdev, "Failed to set vibration intensity: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ally_vibration_defaults(void)
+{
+ guard(mutex)(&ally_prefs.lock);
+
+ if (ally_prefs.initialized)
+ return;
+
+ ally_prefs.vibration_intensity_left = 100;
+ ally_prefs.vibration_intensity_right = 100;
+}
+
+static ssize_t left_vibration_intensity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ guard(mutex)(&ally_prefs.lock);
+
+ return sysfs_emit(buf, "%u\n", ally_prefs.vibration_intensity_left);
+}
+
+static ssize_t left_vibration_intensity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ u8 value;
+ int ret;
+
+ ret = kstrtou8(buf, 10, &value);
+ if (ret || value > 100)
+ return -EINVAL;
+
+ scoped_guard(mutex, &ally_prefs.lock) {
+ ret = ally_set_vibration_intensity(hdev, value,
+ ally_prefs.vibration_intensity_right);
+ if (ret < 0)
+ return ret;
+
+ ally_prefs.vibration_intensity_left = value;
+ }
+
+ sysfs_notify(&dev->kobj, "left_vibration", "intensity");
+
+ return count;
+}
+
+static ssize_t left_vibration_intensity_range_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "0 100\n");
+}
+
+static ssize_t right_vibration_intensity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ guard(mutex)(&ally_prefs.lock);
+
+ return sysfs_emit(buf, "%u\n", ally_prefs.vibration_intensity_right);
+}
+
+static ssize_t right_vibration_intensity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ u8 value;
+ int ret;
+
+ ret = kstrtou8(buf, 10, &value);
+ if (ret || value > 100)
+ return -EINVAL;
+
+ scoped_guard(mutex, &ally_prefs.lock) {
+ ret = ally_set_vibration_intensity(hdev,
+ ally_prefs.vibration_intensity_left,
+ value);
+ if (ret < 0)
+ return ret;
+
+ ally_prefs.vibration_intensity_right = value;
+ }
+
+ sysfs_notify(&dev->kobj, "right_vibration", "intensity");
+
+ return count;
+}
+
+static ssize_t right_vibration_intensity_range_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "0 100\n");
+}
+
+static struct device_attribute dev_attr_left_vibration_intensity =
+ __ATTR(intensity, 0644, left_vibration_intensity_show, left_vibration_intensity_store);
+
+static struct device_attribute dev_attr_left_vibration_intensity_range =
+ __ATTR(intensity_range, 0444, left_vibration_intensity_range_show, NULL);
+
+static struct device_attribute dev_attr_right_vibration_intensity =
+ __ATTR(intensity, 0644, right_vibration_intensity_show, right_vibration_intensity_store);
+
+static struct device_attribute dev_attr_right_vibration_intensity_range =
+ __ATTR(intensity_range, 0444, right_vibration_intensity_range_show, NULL);
+
+static struct attribute *ally_left_vibration_attrs[] = {
+ &dev_attr_left_vibration_intensity.attr,
+ &dev_attr_left_vibration_intensity_range.attr,
+ NULL
+};
+
+static struct attribute *ally_right_vibration_attrs[] = {
+ &dev_attr_right_vibration_intensity.attr,
+ &dev_attr_right_vibration_intensity_range.attr,
+ NULL
+};
+
static struct attribute *ally_config_attrs[] = {
&dev_attr_xbox_controller.attr,
NULL
@@ -900,6 +1051,14 @@ static const struct attribute_group ally_attr_groups[] = {
{
.attrs = ally_config_attrs,
},
+ {
+ .name = "left_vibration",
+ .attrs = ally_left_vibration_attrs,
+ },
+ {
+ .name = "right_vibration",
+ .attrs = ally_right_vibration_attrs,
+ },
};
static int ally_prefs_setup(struct hid_device *hdev)
@@ -910,6 +1069,8 @@ static int ally_prefs_setup(struct hid_device *hdev)
if (ret)
return ret;
+ ally_vibration_defaults();
+
guard(mutex)(&ally_prefs.lock);
if (!ally_prefs.initialized) {
@@ -1144,6 +1305,18 @@ static int hid_asus_ally_init(struct hid_device *hdev)
hid_warn(hdev, "Failed to apply Xbox controller mode: %d\n", ret);
}
+ /*
+ * The MCU does not keep the vibration intensity across a reset:
+ * send the recorded values again.
+ */
+ if (ally_prefs.initialized) {
+ ret = ally_set_vibration_intensity(hdev,
+ ally_prefs.vibration_intensity_left,
+ ally_prefs.vibration_intensity_right);
+ if (ret < 0)
+ hid_warn(hdev, "Failed to restore vibration intensity: %d\n", ret);
+ }
+
return 0;
}
--
2.47.3
next prev parent reply other threads:[~2026-10-31 17:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-31 17:41 [PATCH v12 00/17] HID: asus: add support for ROG Ally handhelds Denis Benato
2026-10-31 17:41 ` [PATCH v12 01/17] HID: asus: size feature reports from the HID report descriptor Denis Benato
2026-10-31 18:30 ` Rebecca Mara Müller
2026-10-31 17:41 ` [PATCH v12 02/17] HID: asus: add support for ROG Ally handhelds Denis Benato
2026-10-31 17:41 ` [PATCH v12 03/17] HID: asus: add gamepad configuration Denis Benato
2026-10-31 17:41 ` Denis Benato [this message]
2026-10-31 17:41 ` [PATCH v12 05/17] HID: asus: add joysticks inner and outer range configuration Denis Benato
2026-10-31 17:41 ` [PATCH v12 06/17] HID: asus: add triggers " Denis Benato
2026-10-31 17:41 ` [PATCH v12 07/17] HID: asus: add joysticks anti-deadzone configuration Denis Benato
2026-10-31 17:41 ` [PATCH v12 08/17] HID: asus: add support for response curve Denis Benato
2026-10-31 17:41 ` [PATCH v12 09/17] HID: asus: add support to force feedback Denis Benato
2026-10-31 17:41 ` [PATCH v12 10/17] HID: asus: add support for gamepad mode Denis Benato
2026-10-31 17:41 ` [PATCH v12 11/17] HID: asus: add support for turbo buttons Denis Benato
2026-10-31 17:41 ` [PATCH v12 12/17] HID: asus: add support for btn remapping Denis Benato
2026-10-31 17:41 ` [PATCH v12 13/17] HID: asus: identify XG Mobile stations and bind the LED to the reported model Denis Benato
2026-10-31 17:41 ` [PATCH v12 14/17] HID: asus: expose XG Mobile identity and firmware information Denis Benato
2026-10-31 17:41 ` [PATCH v12 15/17] HID: asus: document ROG XG Mobile sysfs attributes Denis Benato
2026-10-31 17:41 ` [PATCH v12 16/17] platform/x86: asus-armoury: pick the eGPU activation from the reported GPU Denis Benato
2026-10-31 17:41 ` [PATCH v12 17/17] MAINTAINERS: add maintainer for the ASUS HID driver Denis Benato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261031174130.208240-5-denis.benato@linux.dev \
--to=denis.benato@linux.dev \
--cc=benato.denis96@gmail.com \
--cc=bentiss@kernel.org \
--cc=corentin.chary@gmail.com \
--cc=derekjohn.clark@gmail.com \
--cc=hacker1024@users.sourceforge.net \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jikos@kernel.org \
--cc=jlobue10@gmail.com \
--cc=kernel@lists.opengamingcollective.org \
--cc=khamunetriclark@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luke@ljones.dev \
--cc=matthew.schwartz@linux.dev \
--cc=me@livan.pro \
--cc=nathan@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rebecca.mara@posteo.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®