From: Christian Ruppert <arc@gmx.li>
To: Will Porter <mrwillporter@gmail.com>
Cc: Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Andrews <neil@androos.io>, Christian Ruppert <arc@gmx.li>
Subject: [RFC PATCH 02/11] ALSA: mixer_audient: explicitly define full control names
Date: Sun, 1 Nov 2026 01:00:04 +0100 [thread overview]
Message-ID: <20261101000013.11880-3-arc@gmx.li> (raw)
In-Reply-To: <20261101000013.11880-1-arc@gmx.li>
Previously, control names were dynamically created depending if the
control was an input or an output, a volume or a switch. Get rid of this
logic by simply defining the full name in the control structure.
Signed-off-by: Christian Ruppert <arc@gmx.li>
---
sound/usb/mixer_audient.c | 50 +++++++++++----------------------------
1 file changed, 14 insertions(+), 36 deletions(-)
diff --git a/sound/usb/mixer_audient.c b/sound/usb/mixer_audient.c
index 8c1524c9b165..917b5bc53869 100644
--- a/sound/usb/mixer_audient.c
+++ b/sound/usb/mixer_audient.c
@@ -90,107 +90,92 @@ static const struct snd_audient_ctrl_type {
},
};
-#define SND_AUDIENT_FLAGS_DIRECTION (1L<<0)
-#define SND_AUDIENT_FLAGS_CAPTURE (1L<<0)
-#define SND_AUDIENT_FLAGS_PLAYBACK (0L<<0)
struct snd_audient_ctrl {
- char *basename;
+ char *name;
enum snd_audient_type type;
unsigned int channels;
unsigned int hwchannels;
unsigned int val_offs;
- unsigned long flags;
};
static const struct snd_audient_ctrl snd_audient_evo4_controls[] = {
{
- .basename = "Master",
+ .name = "Master Playback Switch",
.type = SND_AUDIENT_TYPE_MUTE_OUT,
.channels = 1,
.hwchannels = 1,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_PLAYBACK,
},
{
- .basename = "Mic",
+ .name = "Mic Playback Switch",
.type = SND_AUDIENT_TYPE_MUTE,
.channels = 4,
.hwchannels = 2,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_PLAYBACK,
},
{
- .basename = "Monitor",
+ .name = "Monitor Playback Volume",
.type = SND_AUDIENT_TYPE_MONITOR,
.channels = 1,
.hwchannels = 1,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_PLAYBACK,
},
{
- .basename = "Mic 1",
+ .name = "Mic 1 Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Mic 2",
+ .name = "Mic 2 Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 2,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Master Left",
+ .name = "Master Left Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 4,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Master Right",
+ .name = "Master Right Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 6,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Loopback Left",
+ .name = "Loopback Left Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 8,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Loopback Right",
+ .name = "Loopback Right Capture Volume",
.type = SND_AUDIENT_TYPE_MIXER,
.channels = 2,
.hwchannels = 2,
.val_offs = 10,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Mic 1 Phantom",
+ .name = "Mic 1 Phantom Capture Switch",
.type = SND_AUDIENT_TYPE_PHANTOM,
.channels = 1,
.hwchannels = 1,
.val_offs = 0,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{
- .basename = "Mic 2 Phantom",
+ .name = "Mic 2 Phantom Capture Switch",
.type = SND_AUDIENT_TYPE_PHANTOM,
.channels = 1,
.hwchannels = 1,
.val_offs = 1,
- .flags = SND_AUDIENT_FLAGS_CAPTURE,
},
{ 0 }, /* sentinel */
};
@@ -458,13 +443,12 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
{
const struct snd_audient_ctrl_type *ctype
= &snd_audient_ctypes[ctrl->type];
- char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
struct snd_kcontrol_new knew = { 0 };
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *elem;
knew.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
- knew.name = name;
+ knew.name = ctrl->name;
knew.info = snd_ctl_audient_info;
knew.private_value = snd_audient_kctl_priv(ctrl->type, ctrl->val_offs,
ctrl->hwchannels);
@@ -486,12 +470,6 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
return -EINVAL;
}
- snprintf(name, sizeof(name), "%s %s %s", ctrl->basename,
- ((ctrl->flags & SND_AUDIENT_FLAGS_DIRECTION)
- == SND_AUDIENT_FLAGS_CAPTURE) ? "Capture" : "Playback",
- (ctype->type == SNDRV_CTL_ELEM_TYPE_BOOLEAN)
- ? "Switch" : "Volume");
-
elem = kzalloc_obj(*elem);
if (!elem)
return -ENOMEM;
@@ -524,7 +502,7 @@ int snd_audient_controls_create(struct usb_mixer_interface *mixer)
if (!info->controls)
return -ENODEV;
- for (ctrl = info->controls; ctrl->basename; ctrl++) {
+ for (ctrl = info->controls; ctrl->name; ctrl++) {
const int ret = snd_audient_add_ctrl(mixer, ctrl);
if (ret < 0)
--
2.56.0
next prev parent reply other threads:[~2026-11-01 0:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 23:01 [PATCH 0/5] ALSA: usb-audio: Audient iD14 MkI vendor controls Will Porter
2026-10-19 23:01 ` [PATCH 1/5] ALSA: usb-audio: Give the Audient iD14 MkI its own mixer map Will Porter
2026-10-19 23:01 ` [PATCH 2/5] ALSA: usb-audio: Add Audient iD14 MkI monitor and routing controls Will Porter
2026-10-19 23:01 ` [PATCH 3/5] ALSA: usb-audio: Add Audient iD14 MkI mixer matrix Will Porter
2026-10-19 23:01 ` [PATCH 4/5] ALSA: usb-audio: Add Audient iD14 MkI write-only controls Will Porter
2026-10-19 23:01 ` [PATCH 5/5] ALSA: usb-audio: Replace the Audient iD14 MkI FU 12 control Will Porter
2026-10-20 13:10 ` [PATCH 0/5] ALSA: usb-audio: Audient iD14 MkI vendor controls Takashi Iwai
2026-10-26 18:36 ` Christian Ruppert
2026-10-26 21:44 ` Will Porter
2026-10-27 6:35 ` Takashi Iwai
2026-10-27 23:21 ` Christian Ruppert
2026-10-28 2:36 ` Will Porter
2026-11-01 0:00 ` [RFC PATCH 00/11] " Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 01/11] ALSA: rename mixer_evo to mixer_audient Christian Ruppert
2026-11-01 0:00 ` Christian Ruppert [this message]
2026-11-01 0:00 ` [RFC PATCH 03/11] ALSA: mixer_audient: clarify USB control message definition Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 04/11] ALSA: mixer_audient: Add length check to USB transfer Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 05/11] ALSA: mixer_audient: make USB control transfer size configurable Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 06/11] ALSA: mixer_audient: Allow arbitrary boolean control values Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 07/11] ALSA: mixer_audient: Add integer range checks Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 08/11] ALSA: mixer_audient: Add control initialization at probe Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 09/11] ALSA: mixer_audient: Add readback-free parameter set Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 10/11] ALSA: mixer_audient: add control value caching Christian Ruppert
2026-11-01 0:00 ` [RFC PATCH 11/11] ALSA: mixer_audient: Create matrix programmatically Christian Ruppert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261101000013.11880-3-arc@gmx.li \
--to=arc@gmx.li \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mrwillporter@gmail.com \
--cc=neil@androos.io \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®