[PATCH] spmi: pmic-arb: Fix the driver data used by non-data commands

[Abel Vesa <abel.vesa@oss.qualcomm.com>]

Since commit 02922ccbb330 ("spmi: pmic-arb: Register controller for bus
instead of arbiter"), the driver data of each SPMI controller is a
struct spmi_pmic_arb_bus, which points to the arbiter. pmic_arb_cmd()
was not converted along with the other controller callbacks and still
takes the driver data for the arbiter itself, so a non-data command
reads ver_ops from the wrong structure and calls through a bogus
pointer.

No in-tree driver sends non-data commands at the moment, which is why
this has gone unnoticed, but spmi_command_reset() and friends are
exported for any SPMI client to use.

Get the arbiter through the bus, like the other callbacks do.

Fixes: 02922ccbb330 ("spmi: pmic-arb: Register controller for bus instead of arbiter")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/bug/linux-29e1d31a-8d20-42c9-a5b3-41a90553d799
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
Prepared with help from an LLM-based assistant.
---
 drivers/spmi/spmi-pmic-arb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 402ffeaff8e2..9ce404ed5272 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -448,7 +448,8 @@ pmic_arb_non_data_cmd_v2(struct spmi_controller *ctrl, u8 opc, u8 sid)
 /* Non-data command */
 static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
 {
-	struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
+	struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
+	struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
 
 	dev_dbg(&ctrl->dev, "cmd op:0x%x sid:%d\n", opc, sid);
 

---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261102-spmi-pmic-arb-cmd-drvdata-fe9a1e308063

Best regards,
--  

Abel