[PATCH v2] iio: trigger: fix use-after-free in current_trigger_store() on concurrent writers

[Yu Zhang <yuz08559@gmail.com>]

current_trigger_store() holds iio_dev_opaque->mlock only around the
INDIO_BUFFER_TRIGGERED / trig_readonly checks and then drops it. The rest
runs unlocked: it reads the current trigger into oldtrig, acquires the new
one by name, stores it into indio_dev->trig, and drops the old trigger's
reference with iio_trigger_put().

sysfs does not serialize writes to the same attribute issued through
different open file descriptors (each open has its own kernfs_open_file),
so two threads can run current_trigger_store() on the same
.../trigger/current_trigger concurrently. Both read the same oldtrig, both
overwrite indio_dev->trig, and both call iio_trigger_put(oldtrig). The
extra put drops the trigger's refcount to zero while it is still in use,
frees it, and a concurrent writer then dereferences the freed trigger.

With two sets of writers hammering current_trigger between two software
triggers on an iio_dummy device, KASAN reports:

  refcount_t: addition on 0; use-after-free.
  WARNING: CPU: 3 PID: 3467 at refcount_warn_saturate+0xbb/0xe0
   kobject_get+0xf6/0x100
   current_trigger_store+0x15c/0x4b0
  ...
  BUG: KASAN: slab-use-after-free in current_trigger_store+0x168/0x4b0
  Freed by task 3468:
   kobject_put+0x125/0x220
   current_trigger_store+0x2cc/0x4b0
  Allocated by task 3454:
   __iio_trigger_alloc+0xc7/0x100
  ...
  Oops: general protection fault
   __module_get+0x27/0xd0
   current_trigger_store+0x192/0x4b0

Hold mlock across the whole operation so that reading oldtrig, swapping
indio_dev->trig and dropping the reference are atomic with respect to
other writers (and to buffer enable, which the -EBUSY check guards).
Acquiring the new trigger with iio_trigger_acquire_by_name() under mlock
is safe: it only takes iio_trigger_list_lock, and the buffer path already
calls iio_trigger_{attach,detach}_poll_func() with mlock held.

The trigger swap itself keeps its goto based cleanup of the newly
acquired trigger, so move it into a helper and take mlock with guard()
in current_trigger_store() around the mode checks and the helper call,
rather than mixing guard() and goto in one function.

Cc: stable@vger.kernel.org
Signed-off-by: Yu Zhang <yuz08559@gmail.com>
---
 drivers/iio/industrialio-trigger.c | 60 +++++++++++++++++-------------
 1 file changed, 34 insertions(+), 26 deletions(-)

diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 76926fe..cfc6af0 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -421,37 +421,14 @@ static ssize_t current_trigger_show(struct device *dev,
 	return 0;
 }
 
-/**
- * current_trigger_store() - trigger consumer sysfs set current trigger
- * @dev:	device associated with an industrial I/O device
- * @attr:	device attribute that is being processed
- * @buf:	string buffer that holds the name of the trigger
- * @len:	length of the trigger name held by buf
- *
- * For trigger consumers the current_trigger interface allows the trigger
- * used for this device to be specified at run time based on the trigger's
- * name.
- *
- * Return: negative error code on failure or length of the buffer
- *	   on success
- */
-static ssize_t current_trigger_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t len)
+/* Must be called with iio_dev_opaque->mlock held. */
+static ssize_t iio_trigger_set_current(struct iio_dev *indio_dev,
+				       const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
 	struct iio_trigger *oldtrig = indio_dev->trig;
 	struct iio_trigger *trig;
 	int ret;
 
-	scoped_guard(mutex, &iio_dev_opaque->mlock) {
-		if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED)
-			return -EBUSY;
-		if (iio_dev_opaque->trig_readonly)
-			return -EPERM;
-	}
-
 	trig = iio_trigger_acquire_by_name(buf);
 	if (oldtrig == trig) {
 		ret = len;
@@ -492,6 +469,37 @@ out_trigger_put:
 	return ret;
 }
 
+/**
+ * current_trigger_store() - trigger consumer sysfs set current trigger
+ * @dev:	device associated with an industrial I/O device
+ * @attr:	device attribute that is being processed
+ * @buf:	string buffer that holds the name of the trigger
+ * @len:	length of the trigger name held by buf
+ *
+ * For trigger consumers the current_trigger interface allows the trigger
+ * used for this device to be specified at run time based on the trigger's
+ * name.
+ *
+ * Return: negative error code on failure or length of the buffer
+ *	   on success
+ */
+static ssize_t current_trigger_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
+
+	guard(mutex)(&iio_dev_opaque->mlock);
+
+	if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED)
+		return -EBUSY;
+	if (iio_dev_opaque->trig_readonly)
+		return -EPERM;
+
+	return iio_trigger_set_current(indio_dev, buf, len);
+}
+
 static DEVICE_ATTR_RW(current_trigger);
 
 static struct attribute *iio_trigger_consumer_attrs[] = {
---
v2:
 - Move the trigger swap into a helper, iio_trigger_set_current(), and
   take mlock with guard() in current_trigger_store() only, so that
   guard() and the goto based cleanup of the newly acquired trigger are
   not mixed in one function (Jonathan Cameron, Sashiko). No change to
   the locking itself.
v1: https://lore.kernel.org/all/20261026100246.68005-1-yuz08559@gmail.com/

-- 
2.43.0