From: Ping Li <leeonion.muyu@gmail.com>
To: james.morse@arm.com, ben.horgan@arm.com
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, reinette.chatre@intel.com,
fenghuay@nvidia.com, Ping Li <leeonion.muyu@gmail.com>
Subject: [PATCH] arm_mpam: Only program MATCH_PMG when the monitor supports it
Date: Mon, 2 Nov 2026 15:13:00 +0800 [thread overview]
Message-ID: <20261102071300.554160-1-leeonion.muyu@gmail.com> (raw)
An MSC of ours implements the MBWU monitor without PMG support:
MPAMF_MBWUMON_IDR.NO_MATCH_PMG is 1, so MSMON_CFG_x_CTL.MATCH_PMG is
RES0. On this hardware resctrl monitor reads always returned 0.
Tracking this down: __read_mon() unconditionally sets match_pmg,
because the resctrl (closid, rmid) model maps rmid to PMG. The
expected configuration generated by gen_msmon_ctl_flt_vals() then
contains MATCH_PMG, but the hardware ignores the bit, so the
configuration read back never matches, config_mismatch is always
true and the monitor is reprogrammed on every read - the counter
never accumulates.
The architecture allows an MSMON implementation without PMG
support, so read the NO_MATCH_PMG bits during probe and only
program MATCH_PMG when the monitor supports PMG filtering,
falling back to filtering by PARTID only. The CSU monitor has
the same issue and is covered the same way.
Signed-off-by: Ping Li <leeonion.muyu@gmail.com>
---
drivers/resctrl/mpam_devices.c | 22 +++++++++++++++++++++-
drivers/resctrl/mpam_internal.h | 4 ++++
2 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index c067b6d57d71..2086ff121b59 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -1089,6 +1089,9 @@ static int mpam_ris_hw_probe(struct mpam_msc_ris *ris)
if (FIELD_GET(MPAMF_CSUMON_IDR_HAS_XCL, csumonidr))
mpam_set_feature(mpam_feat_msmon_csu_xcl, props);
+ if (!FIELD_GET(MPAMF_CSUMON_IDR_NO_MATCH_PMG, csumonidr))
+ mpam_set_feature(mpam_feat_msmon_csu_match_pmg, props);
+
/* Is NRDY hardware managed? */
err = mpam_ris_hw_probe_csu_nrdy(ris);
if (err < 0)
@@ -1118,6 +1121,9 @@ static int mpam_ris_hw_probe(struct mpam_msc_ris *ris)
if (FIELD_GET(MPAMF_MBWUMON_IDR_HAS_RWBW, mbwumon_idr))
mpam_set_feature(mpam_feat_msmon_mbwu_rwbw, props);
+ if (!FIELD_GET(MPAMF_MBWUMON_IDR_NO_MATCH_PMG, mbwumon_idr))
+ mpam_set_feature(mpam_feat_msmon_mbwu_match_pmg, props);
+
has_long = FIELD_GET(MPAMF_MBWUMON_IDR_HAS_LONG, mbwumon_idr);
if (has_long) {
if (FIELD_GET(MPAMF_MBWUMON_IDR_LWD, mbwumon_idr))
@@ -1309,6 +1315,20 @@ static int mpam_msc_zero_mbwu_l(struct mpam_msc *msc)
return __mpam_write_reg(msc, MSMON_MBWU_L + 4, 0);
}
+static bool msmon_supports_match_pmg(struct mon_read *m)
+{
+ switch (m->type) {
+ case mpam_feat_msmon_csu:
+ return mpam_has_feature(mpam_feat_msmon_csu_match_pmg, &m->ris->props);
+ case mpam_feat_msmon_mbwu_31counter:
+ case mpam_feat_msmon_mbwu_44counter:
+ case mpam_feat_msmon_mbwu_63counter:
+ return mpam_has_feature(mpam_feat_msmon_mbwu_match_pmg, &m->ris->props);
+ default:
+ return true;
+ }
+}
+
static void gen_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
u32 *flt_val)
{
@@ -1322,7 +1342,7 @@ static void gen_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
*flt_val = FIELD_PREP(MSMON_CFG_x_FLT_PARTID, ctx->partid);
- if (m->ctx->match_pmg) {
+ if (m->ctx->match_pmg && msmon_supports_match_pmg(m)) {
*ctl_val |= MSMON_CFG_x_CTL_MATCH_PMG;
*flt_val |= FIELD_PREP(MSMON_CFG_x_FLT_PMG, ctx->pmg);
}
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 1f86cc158100..88cd5ac4cde3 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -227,12 +227,14 @@ enum mpam_device_features {
mpam_feat_msmon_csu,
mpam_feat_msmon_csu_capture,
mpam_feat_msmon_csu_xcl,
+ mpam_feat_msmon_csu_match_pmg,
mpam_feat_msmon_mbwu,
mpam_feat_msmon_mbwu_31counter,
mpam_feat_msmon_mbwu_44counter,
mpam_feat_msmon_mbwu_63counter,
mpam_feat_msmon_mbwu_capture,
mpam_feat_msmon_mbwu_rwbw,
+ mpam_feat_msmon_mbwu_match_pmg,
mpam_feat_partid_nrw,
MPAM_FEATURE_LAST
};
@@ -645,6 +647,7 @@ int mpam_fb_check_shared_buffer_size(struct mpam_msc *msc);
/* MPAMF_CSUMON_IDR - MPAM cache storage usage monitor ID register */
#define MPAMF_CSUMON_IDR_NUM_MON GENMASK(15, 0)
+#define MPAMF_CSUMON_IDR_NO_MATCH_PMG BIT(22)
#define MPAMF_CSUMON_IDR_HAS_OFLOW_CAPT BIT(24)
#define MPAMF_CSUMON_IDR_HAS_CEVNT_OFLW BIT(25)
#define MPAMF_CSUMON_IDR_HAS_OFSR BIT(26)
@@ -655,6 +658,7 @@ int mpam_fb_check_shared_buffer_size(struct mpam_msc *msc);
/* MPAMF_MBWUMON_IDR - MPAM memory bandwidth usage monitor ID register */
#define MPAMF_MBWUMON_IDR_NUM_MON GENMASK(15, 0)
+#define MPAMF_MBWUMON_IDR_NO_MATCH_PMG BIT(22)
#define MPAMF_MBWUMON_IDR_HAS_RWBW BIT(28)
#define MPAMF_MBWUMON_IDR_LWD BIT(29)
#define MPAMF_MBWUMON_IDR_HAS_LONG BIT(30)
--
2.34.1
next reply other threads:[~2026-11-02 7:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 7:13 Ping Li [this message]
2026-11-02 9:46 ` Ben Horgan
2026-11-02 12:05 ` Ping Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102071300.554160-1-leeonion.muyu@gmail.com \
--to=leeonion.muyu@gmail.com \
--cc=ben.horgan@arm.com \
--cc=fenghuay@nvidia.com \
--cc=james.morse@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=reinette.chatre@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®