Re: [PATCH 4/6] perf/x86/intel/pt: Clear TraceEn in hardware in cpu_emergency_stop_pt()

[Peter Zijlstra <peterz@infradead.org>]

On Mon, Nov 02, 2026 at 09:40:37AM +0200, Adrian Hunter wrote:
> cpu_emergency_stop_pt() stops tracing through pt_event_stop(), which
> assumes the software state accurately reflects whether tracing is
> enabled.  That assumption can fail when a crash NMI interrupts
> pt_config_start().
> 
> pt_config_start() sets TraceEn in IA32_RTIT_CTL before updating
> event->hw.aux_config.  If a crash NMI arrives in that window,
> pt_config_stop() sees TraceEn clear in aux_config and skips the MSR
> write needed to disable tracing.  Tracing remains active in hardware.
> 
> Alternatively, an earlier NMI in the same window can stop the event
> without restarting it, for example a group throttle calling
> pt_event_stop(event, 0), or a PT PMI for which perf_aux_output_begin()
> fails.  pt_config_stop() again skips the write, so the event is stopped
> only in software: TraceEn remains set in IA32_RTIT_CTL, and
> pt->handle.event becomes NULL.  When pt_config_start() continues, it
> sets TraceEn in aux_config, so tracing continues until the event is
> next stopped.  If a crash occurs before then, cpu_emergency_stop_pt()
> sees no event and does nothing.
> 
> In both cases tracing can remain active into the kdump kernel.  Moreover,
> pt_event_stop() may access PT MSRs while tracing is still enabled and
> can trigger a #GP by writing IA32_RTIT_STATUS with TraceEn set.
> 
> Fix this by making cpu_emergency_stop_pt() disable tracing directly from
> the hardware state.  Set pt_shutdown and invoke pt_shutdown_cpu(), which
> reads IA32_RTIT_CTL and clears TraceEn whenever it is set, independent
> of perf's software state.  The shutdown flag prevents any path from
> re-enabling tracing afterwards, including intel_pt_handle_vmx(0) during
> the emergency VMXOFF sequence on other CPUs.
> 
> Continue to call pt_event_stop() afterwards so that AUX state, including
> the buffer head, is updated for vmcore collection.  Its PT MSR accesses
> now occur with tracing disabled.
> 
> Do this only if the driver initialized successfully.  In particular, if
> pt_init() finds tracing already enabled at boot, it leaves Intel PT
> alone, and the emergency path must do the same.
> 
> The race is reachable only through restart paths that call
> pt_config_start() with TraceEn clear in the software copy.  These were
> introduced by the commits with the Fixes tags below.  The restart path
> in the PT PMI handler runs in NMI context, so only a machine check can
> interrupt it.
> 
> Fixes: 8e105a1fc2a0 ("perf/x86/intel/pt: Factor out pt_config_start()")
> Fixes: 25e8920b301c ("perf/x86/intel/pt: Add sampling support")
> Fixes: 08c7454ceb94 ("perf/x86/intel/pt: Add support for pause / resume")
> Fixes: 2e17bf3a469a ("perf/x86/intel/pt: Fix stop/start with no update")
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> Cc: stable@vger.kernel.org
> ---
>  arch/x86/events/intel/pt.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
> index 7453e9880b25..8d71c00f9ff6 100644
> --- a/arch/x86/events/intel/pt.c
> +++ b/arch/x86/events/intel/pt.c
> @@ -38,6 +38,8 @@ static struct pt_pmu pt_pmu;
>  /* Set at shutdown, after which TraceEn must not be set */
>  static bool pt_shutdown;
>  
> +static bool pt_initialized __ro_after_init;
> +
>  /*
>   * Capabilities of Intel PT hardware, such as number of address bits or
>   * supported output schemes, are cached and exported to userspace as "caps"
> @@ -1900,6 +1902,12 @@ void cpu_emergency_stop_pt(void)
>  {
>  	struct pt *pt = this_cpu_ptr(&pt_ctx);
>  
> +	if (!pt_initialized)
> +		return;
> +
> +	WRITE_ONCE(pt_shutdown, true);
> +	pt_shutdown_cpu(NULL);
> +
>  	if (pt->handle.event)
>  		pt_event_stop(pt->handle.event, PERF_EF_UPDATE);

So in general pmu::stop() is reachable from PTI/NMI context, through
things like throttling. So arguably it not functioning correctly when
interleaving with pmu::start() is a problem.