From: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"Michal Simek" <michal.simek@amd.com>,
"Sai Krishna Potthuri" <sai.krishna.potthuri@amd.com>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <amitrkcian2002@gmail.com>,
Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Subject: [PATCH 1/6] iio: adc: versal-sysmon: fix race in interrupt teardown
Date: Mon, 2 Nov 2026 17:51:07 +0530 [thread overview]
Message-ID: <20261102122112.1723130-2-amit.kumar-mahapatra@amd.com> (raw)
In-Reply-To: <20261102122112.1723130-1-amit.kumar-mahapatra@amd.com>
sysmon_disable_interrupts() masks all interrupts, clears masked_temp and
cancels the unmask worker, but leaves the interrupt handler live. A
worker that is already running can re-enable an alarm through IER after
the mask write. If that alarm fires, the handler queues the worker again
after cancel_delayed_work_sync() has returned. On unbind this action runs
before devm releases the IRQ, so the queued work can run after the
devm-allocated iio_dev that embeds it has been freed.
Disable the IRQ first so that no handler is running or can start, then
clear masked_temp and cancel the worker, and mask all interrupts last,
once nothing is left that can unmask them. Record the IRQ number for
this.
Fixes: c7f7eb10638f ("iio: adc: versal-sysmon: add threshold event support")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
---
drivers/iio/adc/versal-sysmon-core.c | 5 ++++-
drivers/iio/adc/versal-sysmon.h | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc/versal-sysmon-core.c b/drivers/iio/adc/versal-sysmon-core.c
index 1b55d343982e..6b9a58e19831 100644
--- a/drivers/iio/adc/versal-sysmon-core.c
+++ b/drivers/iio/adc/versal-sysmon-core.c
@@ -781,12 +781,14 @@ static void sysmon_disable_interrupts(void *data)
{
struct sysmon *sysmon = data;
- regmap_write(sysmon->regmap, SYSMON_IDR, SYSMON_INTR_ALL_MASK);
+ disable_irq(sysmon->irq);
scoped_guard(spinlock_irq, &sysmon->irq_lock)
sysmon->masked_temp = 0;
cancel_delayed_work_sync(&sysmon->sysmon_unmask_work);
+
+ regmap_write(sysmon->regmap, SYSMON_IDR, SYSMON_INTR_ALL_MASK);
}
static int sysmon_init_interrupt(struct sysmon *sysmon,
@@ -807,6 +809,7 @@ static int sysmon_init_interrupt(struct sysmon *sysmon,
if (ret)
return ret;
sysmon->temp_mask = imr & SYSMON_TEMP_INTR_MASK;
+ sysmon->irq = irq;
ret = devm_request_irq(dev, irq, sysmon_iio_irq, 0, "sysmon-irq", indio_dev);
if (ret)
diff --git a/drivers/iio/adc/versal-sysmon.h b/drivers/iio/adc/versal-sysmon.h
index bb9a75bf71c0..701ef9b56263 100644
--- a/drivers/iio/adc/versal-sysmon.h
+++ b/drivers/iio/adc/versal-sysmon.h
@@ -85,6 +85,7 @@ struct regmap;
* @regmap: register map for hardware access
* @lock: protects read-modify-write sequences on threshold registers
* and cached state that spans multiple regmap calls
+ * @irq: interrupt number, 0 when events are not supported
* @irq_lock: protects interrupt mask register updates (MMIO path only)
* @masked_temp: currently masked temperature alarm bits
* @temp_mask: temperature interrupt configuration mask
@@ -101,6 +102,7 @@ struct sysmon {
* that spans multiple regmap calls.
*/
struct mutex lock;
+ int irq;
/*
* Protects interrupt mask register updates. Only used on the
* MMIO path (fast_io regmap); I2C has no IRQ and never reaches
--
2.34.1
next prev parent reply other threads:[~2026-11-02 12:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 12:21 [PATCH 0/6] iio: adc: versal-sysmon: Add OT alarm, shutdown and thermal zone support Amit Kumar Mahapatra
2026-11-02 12:21 ` Amit Kumar Mahapatra [this message]
2026-11-02 12:21 ` [PATCH 2/6] iio: adc: versal-sysmon: validate temperature hysteresis Amit Kumar Mahapatra
2026-11-02 12:21 ` [PATCH 3/6] iio: adc: versal-sysmon: disable interrupts on shutdown Amit Kumar Mahapatra
2026-11-02 12:21 ` [PATCH 4/6] iio: adc: versal-sysmon: add over-temperature alarm events Amit Kumar Mahapatra
2026-11-02 12:21 ` [PATCH 5/6] arm64: versal-net: Add SysMon and thermal zone Amit Kumar Mahapatra
2026-11-02 14:53 ` Michal Simek
2026-11-02 12:21 ` [PATCH 6/6] MAINTAINERS: update Versal SysMon maintainers Amit Kumar Mahapatra
2026-11-02 12:53 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102122112.1723130-2-amit.kumar-mahapatra@amd.com \
--to=amit.kumar-mahapatra@amd.com \
--cc=amitrkcian2002@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=sai.krishna.potthuri@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®