From: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v18 1/2] dt-bindings: phy: document the serdes PHY on sa8255p
Date: Tue, 03 Nov 2026 11:35:52 +0100 [thread overview]
Message-ID: <20261103-sa8255p-eth-phy-v18-1-b00cc2fa0404@oss.qualcomm.com> (raw)
In-Reply-To: <20261103-sa8255p-eth-phy-v18-0-b00cc2fa0404@oss.qualcomm.com>
Describe the SGMII/SerDes PHY present on the Qualcomm sa8255p platforms.
This is essentially the same hardware as sa8775p rev3 but the PHY is
managed by firmware over SCMI.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
.../bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml
new file mode 100644
index 0000000000000..4cbf1c271440f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8255p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller (firmware managed)
+
+maintainers:
+ - Bartosz Golaszewski <brgl@kernel.org>
+
+description:
+ The SerDes PHY sits between the MAC and the external PHY and provides
+ separate Rx Tx lines.
+
+properties:
+ compatible:
+ const: qcom,sa8255p-dwmac-sgmii-phy
+
+ reg:
+ items:
+ - description: serdes
+
+ power-domains:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@8901000 {
+ compatible = "qcom,sa8255p-dwmac-sgmii-phy";
+ reg = <0x08901000 0xe10>;
+ #phy-cells = <0>;
+ power-domains = <&scmi7_dvfs 0>;
+ };
--
2.47.3
next prev parent reply other threads:[~2026-11-03 10:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 10:35 [PATCH v18 0/2] phy: qcom: add the SGMII SerDes PHY for firmware-managed systems Bartosz Golaszewski
2026-11-03 10:35 ` Bartosz Golaszewski [this message]
2026-11-03 10:35 ` [PATCH v18 2/2] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261103-sa8255p-eth-phy-v18-1-b00cc2fa0404@oss.qualcomm.com \
--to=bartosz.golaszewski@oss.qualcomm.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mani@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®