[PATCH v2 2/2] wifi: rtw88: ps: Trigger firmware recovery when failing to leave LPS state

[Kalpesh Solanki <skalpesh942@gmail.com>]

When rtw_fw_leave_lps_check() fails, the firmware has locked up or
failed to exit its low power state. Currently, the driver only logs
'firmware failed to leave lps state' and clears REG_TCR, leaving the
hardware in an unresponsive state where subsequent H2C commands fail
and TX traffic hangs indefinitely.

Call rtw_fw_recovery() when rtw_fw_leave_lps_check() fails so the driver
can automatically reset the hardware and re-sync without requiring manual
user intervention.

Signed-off-by: Kalpesh Solanki <skalpesh942@gmail.com>
---
v2:
 - Rebase onto rtw-next.

 drivers/net/wireless/realtek/rtw88/ps.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtw88/ps.c b/drivers/net/wireless/realtek/rtw88/ps.c
index add5a20b843..8dba60f3464 100644
--- a/drivers/net/wireless/realtek/rtw88/ps.c
+++ b/drivers/net/wireless/realtek/rtw88/ps.c
@@ -166,6 +166,7 @@ static void rtw_fw_leave_lps_check(struct rtw_dev *rtwdev)
 		rtw_write32_clr(rtwdev, REG_TCR, BIT_PWRMGT_HWDATA_EN);
 		rtw_warn(rtwdev, "firmware failed to leave lps state\n");
 		rtw_fw_dump_dbg_info(rtwdev);
+		rtw_fw_recovery(rtwdev);
 	}
 }
 
-- 
2.53.0