[PATCH] can: sja1000: fix netdev leak for non-contiguous channels

[Wentao Liang <vulab@iscas.ac.cn>]

pcan_add_channels() stores a registered net_device at card->channel[i],
where i is the hardware channel index, but only increments
card->chan_count by one. When a lower channel is absent or fails to
register and a higher one succeeds, chan_count no longer covers the
used slot. pcan_free_channels() then iterates only up to chan_count and
leaks the net_device of the higher channel; the LED timer and the
interrupt handler also skip it.

Record the highest used channel index plus one in chan_count so that
every iterator covers all channel slots.

Fixes: 2b61972b7421 ("can: sja1000: add support for PEAK-System PCMCIA card")
Cc: stable@vger.kernel.org
Assisted-by: DeepSeek-V4.1-Flash and OpenAI Codex
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
---
 drivers/net/can/sja1000/peak_pcmcia.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index c3c2aa21da47..bba51dd808f8 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -574,7 +574,7 @@ static int pcan_add_channels(struct pcan_pccard *card)
 		}
 
 		card->channel[i].netdev = netdev;
-		card->chan_count++;
+		card->chan_count = i + 1;
 
 		/* set corresponding led on in the new ccr */
 		ccr &= ~PCC_CCR_LED_OFF_CHAN(i);
-- 
2.34.1