[PATCH v2] Input: adi - bound the two-stream packet merge

[Guanglei Zhu <zhugl3@xiaopeng.com>]

When a second device shares the wire, adi_move_bits() appends the
second packet to the first one at an offset taken from the
10-bit length field of the ID packet:

	for (i = 1; i <= adi[1].ret; i++)
		adi[0].data[((length - 1) >> 1) + i + 1] = adi[1].data[i];

	adi[0].ret += adi[1].ret;

Nothing compares the merged packet against the size of the buffer:
adi[0].data is the last member of struct adi, and struct adi_port
holds two of them back to back, so an oversized length field makes
the loop write over the second struct adi - its device pointer, its
length and its packet - and the inflated ret later walks the reads
past the buffer as well. The connect path also calls
adi_move_bits() before the length has been validated at all.

Reject a merge that does not fit in the buffer. Use >= for the
combined length so adi_get_bits() can never walk to data[ret] with
ret == ADI_MAX_LENGTH, and invalidate both half-streams on the
rejection so the unmerged packets are not decoded as standalone
reads.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guanglei Zhu <zhugl3@xiaopeng.com>
---
v2: per review, use >= so a combined ret of ADI_MAX_LENGTH is rejected
    as well (adi_get_bits() allows idx == ret, and data[idx] with
    idx == ADI_MAX_LENGTH reads one byte past the array), and set
    adi[0].ret = adi[1].ret = -1 on the rejection path so the
    unmerged half-streams are not decoded as standalone packets.

 drivers/input/joystick/adi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index e07b719..41262b7 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -168,6 +168,11 @@ static void adi_move_bits(struct adi_port *port, int length)
 
 	if (adi[0].ret <= 0 || adi[1].ret <= 0) return;
 	if (adi[0].data[0] & 0x20 || ~adi[1].data[0] & 0x20) return;
+	if (adi[0].ret + adi[1].ret >= ADI_MAX_LENGTH ||
+	    ((length - 1) >> 1) + adi[1].ret + 1 >= ADI_MAX_LENGTH) {
+		adi[0].ret = adi[1].ret = -1;
+		return;
+	}
 
 	for (i = 1; i <= adi[1].ret; i++)
 		adi[0].data[((length - 1) >> 1) + i + 1] = adi[1].data[i];
-- 
2.43.0