From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=74.125.82.47 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1793713869; b=Pqf422p85Wf7v9v9fCaI2k495VaEWliJJL3rgbNctfIBl97csJB68njZylpV5FGrpgkJ jb6ryQ5JbbFK5AHk8LGBExKKhawYw2Fh/vV9OVjNnlXuzOLTShq98cwOkrVgiN/5XiaQU la0e83oWAAl4cyG2NVGkddwyHs2bEHnx0VM9FJ9rdZplQCUL4R7WW2QGHWitWM3gN47R8 DHC64ZDXniETlYfOGfXQfZ7lSzWUAT9IRtVDQ0/oJ8rn8QSNhB58wkQVebFJpZ6j0jOrO +2s/u+hTjffBzqJm9aIV6ogBlUqHQIfK/P9fBEghGXSpPk89dLyw7rmXdvV2nl7EbRw== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1793713869; h=DMARC-Filter:Received:DKIM-Signature:X-Google-DKIM-Signature: X-Forwarded-Encrypted:X-Gm-Message-State:X-Gm-Gg:X-Received:Received: From:To:Cc:Subject:Date:Message-ID:X-Mailer:In-Reply-To:References: MIME-Version:Content-Transfer-Encoding; bh=9z34kyHsqcQjct+Y1n3MAhMWsz+lKhJy1hwGc9qwvQA=; b=vqM+4TpXAYwKUsklmPwUU5JoSN6+jnW4vWR/eOVv+oVa9K2lSi+7XkN8CpLVR2ghWA7z TZ5GroX4q6TAvTI3NjgPMELqcvrvmk/Y5vTZhuaJAfecerdDiqPKzMrrdCDRDrZmxP++s i7lXJ5k2OoTHVwxUc6PzTtnDfPbzxxHi6NYhIRQIzWEm3DS16/LXBOk6wLxJolWr6UM7M l0MqNcYm3Y3briz8oyl65ISQaHq2LQTNz4jSORCUMor3Ksbh1lT5PnmEmZZrhxZaKVePi eAe/pHpzSWB0vKi1TaUsKWBQyqqG0XOXOTKGcC4yCYgEdOKnj5/ce02TsrgZHzqyBNw== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=SJ2JC93G; arc=none smtp.remote-ip=74.125.82.47 Received: from mail-dl1-f47.google.com (mail-dl1-f47.google.com [74.125.82.47]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 399D16083607 for ; Tue, 3 Nov 2026 13:51:09 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 399D16083607 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key, unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=SJ2JC93G Received: by mail-dl1-f47.google.com with SMTP id a92af1059eb24-1adbf62dd31so4588355c88.0 for ; Tue, 03 Nov 2026 05:51:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20260707; t=1793713868; x=1794318668; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=9z34kyHsqcQjct+Y1n3MAhMWsz+lKhJy1hwGc9qwvQA=; b=SJ2JC93GUl99cCOk+hy6Oo+iIc2nMh57sAUbFVl0gwdfBABQwgrISdygYgGQxC6hEi dJa/RyTTZE06vcJkB3zwSv4LCnSTcz15OtXjqR5sRXYEdMAQ2WyewQiLSTCZ4g8cUA4t /xSGjAPl/WQsXXn33HuQ1HuF1dav6NNnAgODjS0CjVFQ+CcSf4bU9qWiZNcJ8YybyQNy Ipluw98k+J7O3lZIaZIE+/E0Fmmgxi8RmOikoZvUKz9tn+MEWX6AVXOg2Tiv4CFxZ93A Pp+RB5LCc2zz7lMgLRu4Nbl4CvHbtRXvdw3Yq6apPn6IjnmEzMkX+D3rbggXUWOQczur b82A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1793713868; x=1794318668; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=9z34kyHsqcQjct+Y1n3MAhMWsz+lKhJy1hwGc9qwvQA=; b=S64A5b9z1ozoXWl6Z7TwOCvOdoub5rJ4WhFGW05JEi+5wzAaT85U4DVysbdEj6vHLK MGCiqFN//4wea7oM3cGoeDc+3ZXbKAZ0Kjb7DZ44VhC5/PWPgZJA0TZQ4tDtQF6LqVP5 QivRHw3d+GpS9wv1+FxATeaaJ3VbrCDMufM5qAP3uJEdr6obBjHmvSx9+t3yrbLOBc5t 3ykhj+8hlgTzSXkdSOijsB2C//O0wpRSYOBBuaZ2ow0+NI7a90fzgDMM1emIhSuHzHFJ g/NK6G30N1AFxwgE6Ym3h+tGwS6CP1u14yIZEaFZuynX47eOrxGFG81loIdnR4GwhhpQ f+9w== X-Forwarded-Encrypted: i=1; AKwUvBzMYhVOfwyWcKPFqTTqjwM3N4TqVsKnX6m/J9UzIp4EY//AU5l91QeIhsF4WYnQgP8RE1laJIkXkN2Wgtg=@vger.kernel.org X-Gm-Message-State: APuU4Z/yPWp02hYqs01RXdkU1IuvlL/hknpnd6DAJBg1/q5p11MkEFIe 9RvdLhn0mSV6qHrmUu8jFhsdQ5LnNQJMgFwyNKBdSQp2w3FfubTXI5Ju X-Gm-Gg: AYBFou2nlap55OvyrgwQI+D2wD3XgGmWMvahQM6XRo18iOUuX+9kWn+sikXrN3Iqcny ShYxE2Lmhv5y7LAB+lPSS5GpsBt+9W12CK+TICw9A1CqSAsZkOq8hZfny/daZP83zD1tGmG+lnV BS3kWqD0ldPXUjv8w6RSP10niu4GbEet7ebEu1wlJ60CbKIO5D9+jjdkvQeW66yxDn4ELeZM5Zf YbZGTxL2ivUSe2xCVhnVfF9fSaeBwegG8SxzFv49Ts1QpCwIxfk7GgwUm8cH7EYsRpRZkq4LChF zfoIraIFRq0ZyJU3fTlU5wUOcne+ZC8iypSjf5TJukxGL5eWBddbyYyy6OUoghRXgpXXByK9FAq DIJ4F3KAjmYaSO3I8kvdhq9Hkzh77C3PATqFNokx4BBRmCA+6HZW4/34vwLzhqOdbLk27DEr2HI zzR8Rd41RwzIZD5I0zYwWXBR0th0JN6+XmXZyWIZosvTkmqhiuHv6z4KFfmPy1p7hDR2Xkq3ZBE SqUcHutZ8cmEBfWnoz03AdWM8zYADFpZ/I/BpwhzJP7SCeGYL1Dn7MO+AOBjR6Z/jQ004486uPD PyyxfM/I7rUxDyKdvBOK3Zb1QaS3AcGlm2ghtVjjk6mO X-Received: by 2002:a05:7022:ea46:20b0:1a6:53cc:7454 with SMTP id a92af1059eb24-1ac5d4b2ad9mr22027765c88.27.1793713868119; Tue, 03 Nov 2026 05:51:08 -0800 (PST) Received: from DESKTOP-NM9EKIA ([125.134.240.130]) by smtp.gmail.com with ESMTPSA id a92af1059eb24-1ac1845817csm42837321c88.5.2026.11.03.05.51.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 03 Nov 2026 05:51:07 -0800 (PST) From: Joonhoe Kim <26rote@gmail.com> To: gregkh@linuxfoundation.org, Thinh.Nguyen@synopsys.com, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, andersson@kernel.org, konradybcio@kernel.org Cc: abel.vesa@oss.qualcomm.com, wesley.cheng@oss.qualcomm.com, krishna.kurapati@oss.qualcomm.com, konrad.dybcio@oss.qualcomm.com, dmitry.baryshkov@oss.qualcomm.com, neil.armstrong@linaro.org, val@packett.cool, balaji.kalkonda@oss.qualcomm.com, tvlad744@gmail.com, linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/3] usb: dwc3: qcom: Use the UTMI clock as PIPE clock in DisplayPort-only modes Date: Tue, 3 Nov 2026 22:50:56 +0900 Message-ID: <20261103135057.1682-3-26rote@gmail.com> X-Mailer: git-send-email 2.55.0.windows.5 In-Reply-To: <20261103135057.1682-1-26rote@gmail.com> References: <20261103135057.1682-1-26rote@gmail.com> X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit With DisplayPort pin assignment C or E the QMP USB3-DP combo PHY gives all four lanes to DisplayPort and powers its USB PCS down. The controller can still run USB 2.0, e.g. for the hub of a USB-C monitor. Keeping the pipe clock branch enabled, as commit f546912bcac6 ("phy: qcom: qmp-combo: Move pipe_clk on/off to common") does, is not enough on Kaanapali. The next xHCI reset in this mode times out ("Host halt failed, -110"), and USB stops working until the cable is replugged. Register the glue as a Type-C mode switch when the node has the "mode-switch" property. Select the UTMI clock as PIPE clock in DP-only modes, as "qcom,select-utmi-as-pipe-clk" does statically. typec_mux_set() calls the switches in the order of the connector's ports. Port 0 (HS, the controller) comes before port 1 (SS, the PHY). So the controller switches before the PHY powers its USB side down. Go back to the PIPE clock when a USB state follows the safe state. A change of pin assignment while DisplayPort is active keeps the UTMI clock, as the PHY keeps DP-only mode then. The PHY also delays its switch while DisplayPort is still powered, which the controller does not see. After a very quick replug the controller could thus use the PIPE clock while the PHY is still in DP-only mode. This has not been seen on hardware. The mux can be called while the glue is suspended for system sleep, e.g. from the UCSI connector change work. Then only record the state and select the clock on resume, before the core resumes. The mux needs the Type-C class, so depend on TYPEC || TYPEC=n as PHY_QCOM_QMP_COMBO does, and do not register the mux without it. With the arm64 defconfig (TYPEC=m) this builds the glue, including dwc3-qcom-legacy, as a module. Signed-off-by: Joonhoe Kim <26rote@gmail.com> --- v2: - Switch back to the PIPE clock from the mux callback, not on a role change (Sashiko) - Keep dp_only while DisplayPort is active, as the PHY keeps its mode - Defer the clock switch to resume while suspended for system sleep - Depend on TYPEC || TYPEC=n, skip the mux without CONFIG_TYPEC (Sashiko) drivers/usb/dwc3/Kconfig | 1 + drivers/usb/dwc3/dwc3-qcom.c | 103 ++++++++++++++++++++++++++++++----- 2 files changed, 91 insertions(+), 13 deletions(-) diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 18169727a413..282f366de9af 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -132,6 +132,7 @@ config USB_DWC3_QCOM depends on ARCH_QCOM || COMPILE_TEST depends on EXTCON || !EXTCON depends on OF + depends on TYPEC || TYPEC=n default USB_DWC3 help Some Qualcomm SoCs use DesignWare Core IP for USB2/3 diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index ac68b4218b56..71b0402f0ae6 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -19,6 +19,9 @@ #include #include #include +#include +#include +#include #include "core.h" #include "glue.h" @@ -81,6 +84,13 @@ struct dwc3_qcom { enum usb_dr_mode mode; bool is_suspended; bool pm_suspended; + bool ignore_pipe_clk; + bool dp_active; + bool dp_only; + bool utmi_pipe_clk; + /* protects dp_active, dp_only, utmi_pipe_clk and pm_suspended */ + struct mutex pipe_clk_lock; + struct typec_mux_dev *mux; struct icc_path *icc_path_ddr; struct icc_path *icc_path_apps; @@ -419,21 +429,72 @@ static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) return IRQ_HANDLED; } -static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom) +static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom, bool utmi) { - /* Configure dwc3 to use UTMI clock as PIPE clock not present */ dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, PIPE_UTMI_CLK_DIS); usleep_range(100, 1000); - dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, - PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW); + if (utmi) + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW); + else + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW); usleep_range(100, 1000); dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, PIPE_UTMI_CLK_DIS); + + qcom->utmi_pipe_clk = utmi; +} + +static int dwc3_qcom_mux_set(struct typec_mux_dev *mux, + struct typec_mux_state *state) +{ + struct dwc3_qcom *qcom = typec_mux_get_drvdata(mux); + + guard(mutex)(&qcom->pipe_clk_lock); + + if (state->alt && state->alt->svid == USB_TYPEC_DP_SID) { + if (!qcom->dp_active) + qcom->dp_only = state->mode == TYPEC_DP_STATE_C || + state->mode == TYPEC_DP_STATE_E; + qcom->dp_active = true; + } else if (state->mode == TYPEC_STATE_SAFE) { + qcom->dp_active = false; + } else if (!qcom->dp_active) { + qcom->dp_only = false; + } + + if (qcom->ignore_pipe_clk || qcom->pm_suspended || + qcom->dp_only == qcom->utmi_pipe_clk || + pm_runtime_resume_and_get(qcom->dev)) + return 0; + + dwc3_qcom_select_utmi_clk(qcom, qcom->dp_only); + pm_runtime_put_autosuspend(qcom->dev); + + return 0; +} + +static int dwc3_qcom_mux_register(struct dwc3_qcom *qcom) +{ + struct typec_mux_desc desc = {}; + + if (!IS_ENABLED(CONFIG_TYPEC) || + !device_property_present(qcom->dev, "mode-switch")) + return 0; + + desc.drvdata = qcom; + desc.fwnode = dev_fwnode(qcom->dev); + desc.set = dwc3_qcom_mux_set; + + qcom->mux = typec_mux_register(qcom->dev, &desc); + + return PTR_ERR_OR_ZERO(qcom->mux); } static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq, @@ -615,7 +676,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev) struct resource res; struct resource *r; int ret; - bool ignore_pipe_clk; bool wakeup_source; qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL); @@ -678,10 +738,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev) * Disable pipe_clk requirement if specified. Used when dwc3 * operates without SSPHY and only HS/FS/LS modes are supported. */ - ignore_pipe_clk = device_property_read_bool(dev, - "qcom,select-utmi-as-pipe-clk"); - if (ignore_pipe_clk) - dwc3_qcom_select_utmi_clk(qcom); + qcom->ignore_pipe_clk = + device_property_read_bool(dev, "qcom,select-utmi-as-pipe-clk"); + if (qcom->ignore_pipe_clk) + dwc3_qcom_select_utmi_clk(qcom, true); qcom->mode = usb_get_dr_mode(dev); @@ -698,6 +758,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) qcom->current_role = USB_ROLE_DEVICE; } + mutex_init(&qcom->pipe_clk_lock); qcom->dwc.glue_ops = &dwc3_qcom_glue_ops; qcom->dwc.dev = dev; @@ -715,6 +776,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ret) goto remove_core; + ret = dwc3_qcom_mux_register(qcom); + if (ret) + goto interconnect_exit; + wakeup_source = of_property_read_bool(dev->of_node, "wakeup-source"); device_init_wakeup(&pdev->dev, wakeup_source); @@ -722,6 +787,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev) return 0; +interconnect_exit: + dwc3_qcom_interconnect_exit(qcom); remove_core: dwc3_core_remove(&qcom->dwc); clk_disable: @@ -738,6 +805,8 @@ static void dwc3_qcom_remove(struct platform_device *pdev) if (pm_runtime_resume_and_get(qcom->dev) < 0) return; + if (qcom->mux) + typec_mux_unregister(qcom->mux); dwc3_core_remove(&qcom->dwc); clk_bulk_disable_unprepare(qcom->num_clocks, qcom->clks); dwc3_qcom_interconnect_exit(qcom); @@ -756,6 +825,8 @@ static int dwc3_qcom_pm_suspend(struct device *dev) if (ret) return ret; + guard(mutex)(&qcom->pipe_clk_lock); + ret = dwc3_qcom_suspend(qcom, wakeup); if (ret) return ret; @@ -772,11 +843,17 @@ static int dwc3_qcom_pm_resume(struct device *dev) bool wakeup = device_may_wakeup(dev); int ret; - ret = dwc3_qcom_resume(qcom, wakeup); - if (ret) - return ret; + scoped_guard(mutex, &qcom->pipe_clk_lock) { + ret = dwc3_qcom_resume(qcom, wakeup); + if (ret) + return ret; - qcom->pm_suspended = false; + if (!qcom->ignore_pipe_clk && + qcom->dp_only != qcom->utmi_pipe_clk) + dwc3_qcom_select_utmi_clk(qcom, qcom->dp_only); + + qcom->pm_suspended = false; + } ret = dwc3_pm_resume(&qcom->dwc); if (ret) -- 2.43.0