mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Yang <mmyangfl@gmail.com>
To: netdev@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 3/3] net: dsa: motorcomm: Add BR_FLOOD and BR_MCAST_FLOOD support
Date: Tue,  3 Nov 2026 22:01:07 +0800	[thread overview]
Message-ID: <20261103140109.874443-4-mmyangfl@gmail.com> (raw)
In-Reply-To: <20261103140109.874443-1-mmyangfl@gmail.com>

Let the hardware flood the unknown unicast / multicast if all other
ports in the bridge have BR_FLOOD / BR_MCAST_FLOOD enabled.

Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 177 ++++++++++++++++++++++++-------
 drivers/net/dsa/motorcomm/chip.h |   4 +
 2 files changed, 145 insertions(+), 36 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index fb993cc9607c..247446c6466e 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -1160,6 +1160,7 @@ yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port,
 
 static int yt921x_userport_standalone(struct yt921x_priv *priv, int port)
 {
+	struct yt921x_port *pp = &priv->ports[port];
 	u32 mask;
 	u32 ctrl;
 	int res;
@@ -1183,13 +1184,24 @@ static int yt921x_userport_standalone(struct yt921x_priv *priv, int port)
 	if (res)
 		return res;
 
-	/* Unrelated since learning is off and all packets are trapped;
-	 * set it anyway
+	/* Unrelated since learning is off and there is only one possible
+	 * destination; set it anyway
 	 */
 	res = yt921x_port_set_pvid(priv, port, YT921X_VID_UNWARE);
 	if (res)
 		return res;
 
+	mask = BIT(port);
+	res = yt921x_reg_clear_bits(priv, YT921X_FILTER_UNK_UCAST, mask);
+	if (res)
+		return res;
+	res = yt921x_reg_clear_bits(priv, YT921X_FILTER_UNK_MCAST, mask);
+	if (res)
+		return res;
+
+	pp->flood = true;
+	pp->mcast_flood = true;
+
 	return 0;
 }
 
@@ -1225,6 +1237,20 @@ static int yt921x_isolate(struct yt921x_priv *priv, int port)
 	return 0;
 }
 
+static u16 yt921x_port_dest(struct yt921x_priv *priv, int port)
+{
+	struct dsa_switch *ds = &priv->ds;
+	struct net_device *bdev;
+	struct dsa_port *dp;
+
+	dp = dsa_to_port(ds, port);
+	bdev = dsa_port_bridge_dev_get(dp);
+	if (!bdev)
+		return 0;
+
+	return dsa_bridge_ports(ds, bdev) | priv->cpu_ports_mask;
+}
+
 /* Make sure to include the CPU port in ports_mask, or your bridge will
  * not have it.
  */
@@ -1268,7 +1294,72 @@ static int yt921x_bridge(struct yt921x_priv *priv, u16 ports_mask)
 	return 0;
 }
 
-static int yt921x_bridge_leave(struct yt921x_priv *priv, int port)
+static int
+yt921x_bridge_flood_set_type(struct yt921x_priv *priv, u16 ports_mask, int type)
+{
+	unsigned long targets_mask;
+	u16 flood_ports_xor;
+	u32 filter_ctrl;
+	u16 flood_mask;
+	u32 addr;
+	int port;
+	int res;
+
+	ports_mask &= ~priv->cpu_ports_mask;
+
+	flood_mask = 0;
+	targets_mask = ports_mask;
+	for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) {
+		struct yt921x_port *pp = &priv->ports[port];
+
+		if (!type ? pp->flood : pp->mcast_flood)
+			flood_mask |= BIT(port);
+	}
+
+	flood_ports_xor = flood_mask ^ ports_mask;
+	filter_ctrl = 0;
+	targets_mask = ports_mask;
+	for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) {
+		struct yt921x_port *pp = &priv->ports[port];
+
+		/* Hardware never floods back to its own ingress port, keep
+		 * hairpin port trapped: the software bridge does deliver a
+		 * flood there.
+		 */
+		if (!pp->hairpin && !(flood_ports_xor & ~BIT(port)))
+			continue;
+
+		filter_ctrl |= BIT(port);
+	}
+
+	addr = !type ? YT921X_FILTER_UNK_UCAST : YT921X_FILTER_UNK_MCAST;
+	res = yt921x_reg_update_bits(priv, addr, ports_mask, filter_ctrl);
+	if (res)
+		return res;
+
+	/* ACT_UNK is fixed to TRAP for every port, see yt921x_chip_setup_dsa().
+	 */
+
+	return 0;
+}
+
+static int yt921x_bridge_flood_set(struct yt921x_priv *priv, u16 ports_mask)
+{
+	int res;
+	int ret;
+
+	ret = 0;
+	for (int type = 0; type < 2; type++) {
+		res = yt921x_bridge_flood_set_type(priv, ports_mask, type);
+		if (res)
+			ret = res;
+	}
+
+	return ret;
+}
+
+static int
+yt921x_bridge_leave(struct yt921x_priv *priv, int port, u16 other_ports_mask)
 {
 	int res;
 
@@ -1280,6 +1371,10 @@ static int yt921x_bridge_leave(struct yt921x_priv *priv, int port)
 	if (res)
 		return res;
 
+	res = yt921x_bridge_flood_set(priv, other_ports_mask);
+	if (res)
+		return res;
+
 	return 0;
 }
 
@@ -1296,6 +1391,10 @@ yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask)
 	if (res)
 		return res;
 
+	res = yt921x_bridge_flood_set(priv, ports_mask);
+	if (res)
+		return res;
+
 	return 0;
 }
 
@@ -1304,7 +1403,9 @@ yt921x_bridge_flags(struct yt921x_priv *priv, int port,
 		    struct switchdev_brport_flags flags)
 {
 	struct yt921x_port *pp = &priv->ports[port];
-	bool do_flush;
+	bool change_isolated = false;
+	bool change_flood = false;
+	u32 ports_mask;
 	u32 mask;
 	int res;
 
@@ -1318,36 +1419,44 @@ yt921x_bridge_flags(struct yt921x_priv *priv, int port,
 			return res;
 	}
 
-	/* BR_FLOOD, BR_MCAST_FLOOD: see the comment where ACT_UNK_ACTn_TRAP
-	 * is set
-	 */
-
 	/* BR_BCAST_FLOOD: we can filter bcast, but cannot trap them */
 
-	do_flush = false;
 	if (flags.mask & BR_HAIRPIN_MODE) {
 		pp->hairpin = flags.val & BR_HAIRPIN_MODE;
-		do_flush = true;
+		change_isolated = true;
+		/* Hairpin also affects flood flags */
+		change_flood = true;
 	}
 	if (flags.mask & BR_ISOLATED) {
 		pp->isolated = flags.val & BR_ISOLATED;
-		do_flush = true;
+		change_isolated = true;
 	}
-	if (do_flush) {
-		struct dsa_switch *ds = &priv->ds;
-		struct dsa_port *dp = dsa_to_port(ds, port);
-		struct net_device *bdev;
 
-		bdev = dsa_port_bridge_dev_get(dp);
-		if (bdev) {
-			u32 ports_mask;
+	if (flags.mask & BR_FLOOD) {
+		pp->flood = flags.val & BR_FLOOD;
+		change_flood = true;
+	}
+	if (flags.mask & BR_MCAST_FLOOD) {
+		pp->mcast_flood = flags.val & BR_MCAST_FLOOD;
+		change_flood = true;
+	}
 
-			ports_mask = dsa_bridge_ports(ds, bdev);
-			ports_mask |= priv->cpu_ports_mask;
-			res = yt921x_bridge(priv, ports_mask);
-			if (res)
-				return res;
-		}
+	if (!change_isolated && !change_flood)
+		return 0;
+
+	ports_mask = yt921x_port_dest(priv, port);
+	if (!ports_mask)
+		return 0;
+
+	if (change_isolated) {
+		res = yt921x_bridge(priv, ports_mask);
+		if (res)
+			return res;
+	}
+	if (change_flood) {
+		res = yt921x_bridge_flood_set(priv, ports_mask);
+		if (res)
+			return res;
 	}
 
 	return 0;
@@ -1388,13 +1497,17 @@ yt921x_dsa_port_bridge_leave(struct dsa_switch *ds, int port,
 {
 	struct yt921x_priv *priv = dsa_to_yt921x_priv(ds);
 	struct device *dev = yt921x_priv_to_device(priv);
+	u16 ports_mask;
 	int res;
 
 	if (dsa_is_cpu_port(ds, port))
 		return;
 
+	ports_mask = dsa_bridge_ports(ds, bridge.dev);
+	ports_mask |= priv->cpu_ports_mask;
+
 	mutex_lock(&priv->reg_lock);
-	res = yt921x_bridge_leave(priv, port);
+	res = yt921x_bridge_leave(priv, port, ports_mask);
 	mutex_unlock(&priv->reg_lock);
 
 	if (res)
@@ -2275,14 +2388,6 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv)
 	if (res)
 		return res;
 
-	ctrl = GENMASK(10, 0) & ~priv->cpu_ports_mask;
-	res = yt921x_reg_write(priv, YT921X_FILTER_UNK_UCAST, ctrl);
-	if (res)
-		return res;
-	res = yt921x_reg_write(priv, YT921X_FILTER_UNK_MCAST, ctrl);
-	if (res)
-		return res;
-
 	/* YT921x does not support native DSA port bridging, so we use port
 	 * isolation to emulate it. However, be especially careful that port
 	 * isolation takes _after_ FDB lookups, i.e. if an FDB entry (from
@@ -2291,9 +2396,9 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv)
 	 * the "bridged" ports, thus we need to trap and handle those packets by
 	 * software.
 	 *
-	 * If there is no more than one bridge, we might be able to drop them
-	 * directly given some conditions are met, but we trap them in all cases
-	 * for now.
+	 * In some cases, we may offload the flood action to the hardware. This
+	 * is done by fixing UNK_ACT to TRAP, and toggling the FILTER_UNK on the
+	 * appropriate ports.
 	 */
 	ctrl = 0;
 	for (int i = 0; i < YT921X_PORT_NUM; i++)
diff --git a/drivers/net/dsa/motorcomm/chip.h b/drivers/net/dsa/motorcomm/chip.h
index fc315f1d8f87..842fd8f83903 100644
--- a/drivers/net/dsa/motorcomm/chip.h
+++ b/drivers/net/dsa/motorcomm/chip.h
@@ -461,6 +461,10 @@ struct yt921x_port {
 	bool hairpin:1;
 	/* BR_ISOLATED */
 	bool isolated:1;
+	/* BR_FLOOD */
+	bool flood:1;
+	/* BR_MCAST_FLOOD */
+	bool mcast_flood:1;
 
 	unsigned short acl_cnt;
 
-- 
2.53.0


      parent reply	other threads:[~2026-11-03 14:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-03 14:01 [PATCH net-next v3 0/3] " David Yang
2026-11-03 14:01 ` [PATCH net-next v3 1/3] net: dsa: motorcomm: Isolate all ports during chip setup David Yang
2026-11-03 14:01 ` [PATCH net-next v3 2/3] net: dsa: motorcomm: Rely on port isolation for CPU port David Yang
2026-11-03 14:01 ` David Yang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261103140109.874443-4-mmyangfl@gmail.com \
    --to=mmyangfl@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®