[PATCH 2/2] usb: misc: usb251xb: configure battery charging from DT

[Jhon Wilker Rodrigues Aquino <jhonwilker0112@gmail.com>]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Parse the battery-charging-enable port list from the device tree and set the corresponding bits in the hub configuration register.

Keep charging disabled by default when the property is omitted.

Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
---
 drivers/usb/misc/usb251xb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index fb0693742f018..166eb541ef161 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -577,6 +577,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 			      (wchar_t *)hub->serial,
 			      USB251XB_STRING_BUFSIZE);
 
+	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
+	usb251xb_get_ports_field(hub, "battery-charging-enable", data->port_cnt,
+				 true, &hub->bat_charge_en);
+
 	/*
 	 * The datasheet documents the register as 'Port Swap' but in real the
 	 * register controls the USB DP/DM signal swapping for each port.
@@ -588,7 +592,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
-	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_57 = USB251XB_DEF_BOOST_57;
 	hub->boost_14 = USB251XB_DEF_BOOST_14;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
-- 
2.43.0