[PATCH net-next 2/4] dt-bindings: net: pse-pd: realtek,pse-mcu: add VMAIN supply

[Jonas Jelonek <jonas@jonasjelonek.de>]

Describe the VMAIN supply at the MCU controller level. The rail feeds the
PoE subsystem as a whole rather than an individual PI. Its regulator power
budget defines the aggregate limit programmed into the MCU.

Require a finite regulator power budget dedicated to this MCU, representing
the PoE power allocation of the system.

Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
---
 .../bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml          | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
index 526f8525bb4d..82288bb57b33 100644
--- a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
+++ b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
@@ -92,6 +92,13 @@ properties:
       asserted.
     maxItems: 1
 
+  vmain-supply:
+    description:
+      Regulator representing the PoE power allocation of the 44-57V VMAIN
+      supply. This MCU must be its only power-budget consumer. Its unclaimed
+      power budget is used to configure the MCU global PoE power budget. The
+      regulator must define a finite regulator-power-budget-milliwatt value.
+
 required:
   - compatible
 
-- 
2.53.0