[PATCH v3 3/5] bcma: scan: accept wrapper-less cores on wrapper-less backplanes

[Alessio Ferri <alessio.ferri@mythread.it>]

The scan drops every component that publishes no master or slave
wrapper in the EROM (NMW = NSW = 0), apart from a few known cores,
because without a wrapper bcma has no agent registers to gate and
crash. Since usually bcma is loaded early, it ends as a loop-crash.

Some backplanes, such as the integrated WLAN of the BCM6362, have
no wrappers on any core. ChipCommon and the 802.11 core are gated
through a SoC-level register block owned by the host driver, whose
aread32/awrite32 ops emulate the agent registers, and core 0x837
needs no gating.

Add a wrapperless flag to struct bcma_bus, set by the host driver
before bcma_init_bus(), and accept these cores without wrappers when
it is set. Other hosts keep rejecting them.

Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
 drivers/bcma/scan.c       | 6 ++++++
 include/linux/bcma/bcma.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 983a62ddeebb..ef880b635971 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -318,6 +318,12 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
 		case BCMA_CORE_GCI:
 		/* Not used yet: case BCMA_CORE_OOB_ROUTER: */
 			break;
+		case BCMA_CORE_CHIPCOMMON:
+		case BCMA_CORE_80211:
+		case BCMA_CORE_SHIM:
+			if (bus->wrapperless)
+				break;
+			fallthrough;
 		default:
 			bcma_erom_skip_component(bus, eromptr);
 			return -ENXIO;
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 7ab2b21e7238..5dcf877e2872 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -365,6 +365,8 @@ struct bcma_bus {
 
 	/* Backplane registers, EROM included, are big-endian */
 	bool big_endian;
+	/* Cores have no DMP wrappers, the host ops handle agent accesses */
+	bool wrapperless;
 };
 
 static inline u32 bcma_read8(struct bcma_device *core, u16 offset)

-- 
2.56.0