From: Troy Mitchell <troy.mitchell@linux.spacemit.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@kernel.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>,
Guodong Xu <docular.xu@gmail.com>,
Yangyu Chen <cyy@cyyself.name>,
Troy Mitchell <troy.mitchell@linux.spacemit.com>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] riscv: dts: spacemit: Add K3 BS01DCMA support
Date: Wed, 04 Nov 2026 06:21:51 +0000 [thread overview]
Message-ID: <20261104-k3-bs01dcma-v1-2-794025247e4a@linux.spacemit.com> (raw)
In-Reply-To: <20261104-k3-bs01dcma-v1-0-794025247e4a@linux.spacemit.com>
K3 BS01DCMA is a board equipped with a SpacemiT K3 SoC, 16 GiB of LPDDR5
memory, a P1 PMIC, an EEPROM and QSPI NOR flash.
Add initial support for the serial console, EEPROM, PMIC and QSPI NOR
flash.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
arch/riscv/boot/dts/spacemit/Makefile | 1 +
arch/riscv/boot/dts/spacemit/k3-bs01dcma.dts | 266 +++++++++++++++++++++++++++
2 files changed, 267 insertions(+)
diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 851b701e5da4..09d17fef995d 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-r2s.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k3-bs01dcma.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-ifx.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-deepcomputing-fml13v05.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k3-bs01dcma.dts b/arch/riscv/boot/dts/spacemit/k3-bs01dcma.dts
new file mode 100644
index 000000000000..0c3b4ccd105c
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k3-bs01dcma.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2026 SpacemiT (Hangzhou) Technology Co. Ltd
+ */
+
+#include "k3.dtsi"
+#include "k3-pinctrl.dtsi"
+
+/ {
+ model = "SpacemiT K3 BS01DCMA";
+ compatible = "spacemit,k3-bs01dcma", "spacemit,k3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@100000000 {
+ device_type = "memory";
+ reg = <0x1 0x00000000 0x4 0x00000000>;
+ };
+
+ reg_5v_sys: regulator-5v-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "P5V0_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_1_cfg>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <8>;
+ read-only;
+ size = <256>;
+ status = "okay";
+
+ nvmem-layout {
+ compatible = "onie,tlv-layout";
+
+ mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+
+ num-macs {
+ };
+
+ product-name {
+ };
+
+ serial-number {
+ };
+ };
+ };
+};
+
+&i2c8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_cfg>;
+ status = "okay";
+
+ pmic@41 {
+ compatible = "spacemit,p1";
+ reg = <0x41>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ vin1-supply = <®_5v_sys>;
+ vin2-supply = <®_5v_sys>;
+ vin3-supply = <®_5v_sys>;
+ vin4-supply = <®_5v_sys>;
+ vin5-supply = <®_5v_sys>;
+ vin6-supply = <®_5v_sys>;
+ aldoin-supply = <®_5v_sys>;
+ dldoin1-supply = <&buck4>;
+ dldoin2-supply = <&buck4>;
+
+ regulators {
+ buck1: buck1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck2: buck2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck3: buck3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck4: buck4 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck5: buck5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ buck6: buck6 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <500000>;
+ regulator-ramp-delay = <5000>;
+ regulator-always-on;
+ };
+
+ aldo1: aldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aldo2: aldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ aldo3: aldo3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ aldo4: aldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo1: dldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo2: dldo2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo3: dldo3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo4: dldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo5: dldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo6: dldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dldo7: dldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_cfg>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <26500000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootinfo@0 {
+ reg = <0x0 0x20000>;
+ };
+
+ fsbl@20000 {
+ reg = <0x20000 0x80000>;
+ };
+
+ env@a0000 {
+ reg = <0xa0000 0x10000>;
+ };
+
+ esos@b0000 {
+ reg = <0xb0000 0x100000>;
+ };
+
+ opensbi@1b0000 {
+ reg = <0x1b0000 0x60000>;
+ };
+
+ uboot@210000 {
+ reg = <0x210000 0x5f0000>;
+ };
+ };
+ };
+};
+
+&qspi_cfg {
+ qspi-pins {
+ power-source = <1800>;
+ };
+
+ qspi-cs0-pins {
+ power-source = <1800>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_0_cfg>;
+ status = "okay";
+};
--
2.56.0
next prev parent reply other threads:[~2026-11-04 6:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 6:21 [PATCH 0/2] spacemit: k3: Add support for BS01DCMA board Troy Mitchell
2026-11-04 6:21 ` [PATCH 1/2] dt-bindings: riscv: spacemit: Add K3 BS01DCMA Troy Mitchell
2026-11-04 6:21 ` Troy Mitchell [this message]
2026-11-04 12:21 ` [PATCH 2/2] riscv: dts: spacemit: Add K3 BS01DCMA support Emil Renner Berthing
2026-11-04 12:38 ` Troy Mitchell
2026-11-04 12:43 ` Emil Renner Berthing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104-k3-bs01dcma-v1-2-794025247e4a@linux.spacemit.com \
--to=troy.mitchell@linux.spacemit.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=dlan@kernel.org \
--cc=docular.xu@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®