From: Conor Dooley <conor@kernel.org>
To: joseph@telaak.dev
Cc: Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Chuanhong Guo <gch981213@gmail.com>, Yao Zi <me@ziyao.cc>,
linux-mips@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/4] dt-bindings: clock: Add Siflower SF19A2890 peripheral clock/reset managers
Date: Thu, 5 Nov 2026 00:03:13 +0000 [thread overview]
Message-ID: <20261104-remote-festive-1e6d807ef014@spud> (raw)
In-Reply-To: <20261104-sf19a2890-sysm-v1-3-a4fac07df823@telaak.dev>
[-- Attachment #1: Type: text/plain, Size: 6613 bytes --]
On Wed, Nov 04, 2026 at 02:21:00AM -0500, Joseph Telaak via B4 Relay wrote:
> From: Joseph Telaak <joseph@telaak.dev>
>
> Each peripheral block of the Siflower SF19A2890 has a clock and reset
> manager of its own, with a reset register, a clock gate register and a
> bus output enable. The blocks differ in which gate and reset bits they
> use, so each has its own compatible, and clock N of a manager is its
> input clock N, gated.
This binding looks like things that we often see that are actually
incorrect models of the devices in question - things that should be a
syscon but not implemented as one. I'd like to see what the actual dts
for this device looks like before signing off (or really even reviewing
this at all). Given how the clocks look, it is probably accurate but I
wanna be sure.
Cheers,
Conor.
>
> Based on Chuanhong Guo's binding, which described every block with one
> compatible and its bit layout in properties.
>
> Signed-off-by: Joseph Telaak <joseph@telaak.dev>
> ---
> .../clock/siflower,sf19a2890-periph-crm.yaml | 169 +++++++++++++++++++++
> 1 file changed, 169 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/siflower,sf19a2890-periph-crm.yaml b/Documentation/devicetree/bindings/clock/siflower,sf19a2890-periph-crm.yaml
> new file mode 100644
> index 000000000..7f0bce603
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/siflower,sf19a2890-periph-crm.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/siflower,sf19a2890-periph-crm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Siflower SF19A2890 peripheral clock and reset manager
> +
> +maintainers:
> + - Joseph Telaak <joseph@telaak.dev>
> +
> +description: |
> + Each peripheral, or group of peripherals, of the Siflower SF19A2890 has
> + a clock and reset manager of its own: a reset register, a clock gate
> + register, and a bus output enable that the peripherals need as well as
> + their clocks to answer bus requests.
> +
> + Clock N of the manager is input clock N, gated. The reset lines are:
> +
> + gmac-crm: 0 GMAC
> + usb-crm: 0 USB controller, 1 USB PHY power-on, 2 USB PHY
> + uart-crm: 0 UART0, 1 UART1, 2 UART2
> + the others: 0 the block
> +
> +properties:
> + compatible:
> + enum:
> + - siflower,sf19a2890-gmac-crm
> + - siflower,sf19a2890-gpio-crm
> + - siflower,sf19a2890-i2c-crm
> + - siflower,sf19a2890-pwm-crm
> + - siflower,sf19a2890-rf-crm
> + - siflower,sf19a2890-spi-crm
> + - siflower,sf19a2890-timer-crm
> + - siflower,sf19a2890-uart-crm
> + - siflower,sf19a2890-usb-crm
> + - siflower,sf19a2890-wdt-crm
> + - siflower,sf19a2890-wlan24-crm
> + - siflower,sf19a2890-wlan5-crm
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 6
> +
> + "#clock-cells":
> + const: 1
> +
> + "#reset-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - "#clock-cells"
> + - "#reset-cells"
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: siflower,sf19a2890-gmac-crm
> + then:
> + properties:
> + clocks:
> + items:
> + - description: GMAC bus clock
> + - description: GMAC register clock
> + - description: RGMII transmit reference clock
> + - description: Timestamp unit clock
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - siflower,sf19a2890-wlan24-crm
> + - siflower,sf19a2890-wlan5-crm
> + then:
> + properties:
> + clocks:
> + items:
> + - description: AXI slave clock
> + - description: AXI master clock
> + - description: Radio platform clock
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: siflower,sf19a2890-rf-crm
> + then:
> + properties:
> + clocks:
> + items:
> + - description: Test clock
> + - description: AXI slave clock
> + - description: Boot clock
> + - description: Low-power clock
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: siflower,sf19a2890-usb-crm
> + then:
> + properties:
> + clocks:
> + items:
> + - description: USB controller clock
> + - description: AXI master clock
> + - description: USB PHY reference clock
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: siflower,sf19a2890-spi-crm
> + then:
> + properties:
> + clocks:
> + items:
> + - description: APB clock
> + - description: SSP clock
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: siflower,sf19a2890-uart-crm
> + then:
> + properties:
> + clocks:
> + items:
> + - description: UART0 APB clock
> + - description: UART1 APB clock
> + - description: UART2 APB clock
> + - description: UART0 clock
> + - description: UART1 clock
> + - description: UART2 clock
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - siflower,sf19a2890-gpio-crm
> + - siflower,sf19a2890-i2c-crm
> + - siflower,sf19a2890-pwm-crm
> + - siflower,sf19a2890-timer-crm
> + - siflower,sf19a2890-wdt-crm
> + then:
> + properties:
> + clocks:
> + maxItems: 1
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/siflower,sf19a2890-clk.h>
> +
> + clock-controller@19e24c00 {
> + compatible = "siflower,sf19a2890-uart-crm";
> + reg = <0x19e24c00 0x10>;
> + clocks = <&clk CLK_MUXDIV_PBUS>, <&clk CLK_MUXDIV_PBUS>,
> + <&clk CLK_MUXDIV_PBUS>, <&clk CLK_MUXDIV_UART>,
> + <&clk CLK_MUXDIV_UART>, <&clk CLK_MUXDIV_UART>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
>
> --
> Git-155)
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2026-11-05 0:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 7:20 [PATCH 0/4] clk: Add the Siflower SF19A2890 clock manager and peripheral clock and reset managers Joseph Telaak via B4 Relay
2026-11-04 7:20 ` [PATCH 1/4] dt-bindings: clock: Add Siflower SF19A2890 clock manager Joseph Telaak via B4 Relay
2026-11-05 0:04 ` Conor Dooley
2026-11-04 7:20 ` [PATCH 2/4] clk: siflower: Add SF19A2890 clock manager driver Joseph Telaak via B4 Relay
2026-11-04 7:21 ` [PATCH 3/4] dt-bindings: clock: Add Siflower SF19A2890 peripheral clock/reset managers Joseph Telaak via B4 Relay
2026-11-05 0:03 ` Conor Dooley [this message]
2026-11-05 1:08 ` Joseph Telaak
2026-11-05 1:19 ` Conor Dooley
2026-11-05 3:36 ` Joseph Telaak
2026-11-04 7:21 ` [PATCH 4/4] clk: siflower: Add SF19A2890 peripheral clock and reset manager driver Joseph Telaak via B4 Relay
2026-11-04 9:25 ` Philipp Zabel
2026-11-04 13:37 ` Chuanhong Guo
2026-11-04 20:10 ` Joseph Telaak
2026-11-04 13:32 ` Chuanhong Guo
2026-11-04 20:12 ` Joseph Telaak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104-remote-festive-1e6d807ef014@spud \
--to=conor@kernel.org \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gch981213@gmail.com \
--cc=jbrunet+clk@baylibre.com \
--cc=joseph@telaak.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=me@ziyao.cc \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®