From: Yazen Ghannam <yazen.ghannam@amd.com>
To: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Lukas Wunner <lukas@wunner.de>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
Oliver O'Halloran <oohall@gmail.com>, Len Brown <lenb@kernel.org>,
linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 4/6] PCI/portdrv: Don't require AER to bind DPC service
Date: Wed, 4 Nov 2026 10:57:44 -0500 [thread overview]
Message-ID: <20261104155744.GC716491@yaz-khff2.amd.com> (raw)
In-Reply-To: <20261020181924.3003553-5-sathyanarayanan.kuppuswamy@linux.intel.com>
On Tue, Oct 20, 2026 at 11:19:21AM -0700, Kuppuswamy Sathyanarayanan wrote:
> get_port_device_capability() binds the DPC service only if
> pci_aer_available() is true. pci_aer_available() is false with
> "pci=noaer" or when MSI is disabled.
>
> The DPC driver does not need either of these. pci_aer_available()
> depends on MSI only because the AER driver does not work with INTx
> (commit 3e77a3f7895e ("PCI: Disable AER with pci=nomsi")). The DPC
> driver does not depend on MSI or on the AER driver, and it works on
> ports without an AER capability.
>
> PCIe r7.0 sec 6.2.11 recommends that the OS link control of DPC to
> control of AER. PCI Firmware r3.3, sec 4.5.2.4, requires the same for
> _OSC. Both are about ownership, not about using the AER driver.
> host->native_aer and the _OSC negotiation already cover ownership.
>
> Drop the pci_aer_available() check.
>
> The changes in behavior are:
>
> - ACPI systems booted with "pci=noaer" or with MSI disabled, and with
> "pcie_ports=native" or "pcie_ports=dpc-native". The OS now uses DPC
> there, which is what those options ask for. Without them nothing
> changes, because the OS does not request AER control in _OSC, so
> host->native_aer is not set.
>
> - Non-ACPI systems booted with "pci=noaer" or with MSI disabled.
> host->native_aer is set there, so the OS now uses DPC. An
> uncorrectable error that used to be ignored with "pci=noaer" now
> triggers DPC, which takes the link down and resets the devices below
> the port.
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
> drivers/pci/pcie/portdrv.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
> index 32fc623dd410..b77680fd3b75 100644
> --- a/drivers/pci/pcie/portdrv.c
> +++ b/drivers/pci/pcie/portdrv.c
> @@ -263,7 +263,6 @@ static int get_port_device_capability(struct pci_dev *dev)
> * permission to use AER.
> */
> if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
> - pci_aer_available() &&
> (pcie_ports_dpc_native || host->native_aer))
> services |= PCIE_PORT_SERVICE_DPC;
>
> --
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Thanks,
Yazen
next prev parent reply other threads:[~2026-11-04 15:57 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 18:19 [PATCH v2 0/6] PCI/DPC: Decide DPC ownership with host_bridge->native_dpc Kuppuswamy Sathyanarayanan
2026-10-20 18:19 ` [PATCH v2 1/6] PCI/DPC: Avoid access to non-existent AER capability Kuppuswamy Sathyanarayanan
2026-11-03 19:47 ` Yazen Ghannam
2026-11-03 20:25 ` Kuppuswamy Sathyanarayanan
2026-11-03 21:00 ` Lukas Wunner
2026-10-20 18:19 ` [PATCH v2 2/6] PCI/DPC: Reinstate support for AER-incapable ports Kuppuswamy Sathyanarayanan
2026-11-03 20:14 ` Yazen Ghannam
2026-10-20 18:19 ` [PATCH v2 3/6] PCI/EDR: Remove CONFIG_PCIE_EDR Kuppuswamy Sathyanarayanan
2026-11-03 20:46 ` Yazen Ghannam
2026-11-04 18:20 ` Kuppuswamy Sathyanarayanan
2026-10-20 18:19 ` [PATCH v2 4/6] PCI/portdrv: Don't require AER to bind DPC service Kuppuswamy Sathyanarayanan
2026-11-04 15:57 ` Yazen Ghannam [this message]
2026-10-20 18:19 ` [PATCH v2 5/6] PCI/ACPI: Request DPC control only together with AER control Kuppuswamy Sathyanarayanan
2026-11-04 16:13 ` Yazen Ghannam
2026-11-04 18:21 ` Kuppuswamy Sathyanarayanan
2026-10-20 18:19 ` [PATCH v2 6/6] PCI/portdrv: Bind DPC service based on host_bridge->native_dpc Kuppuswamy Sathyanarayanan
2026-11-04 16:35 ` Yazen Ghannam
2026-11-04 18:22 ` Kuppuswamy Sathyanarayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104155744.GC716491@yaz-khff2.amd.com \
--to=yazen.ghannam@amd.com \
--cc=bhelgaas@google.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=oohall@gmail.com \
--cc=rafael@kernel.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®