mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kunwu Chan <kunwu.chan@gmail.com>
To: paulmck@kernel.org, boqun@kernel.org,
	mathieu.desnoyers@efficios.com, jiangshanlai@gmail.com,
	corbet@lwn.net, mingo@redhat.com, frederic@kernel.org,
	neeraj.upadhyay@kernel.org, josh@joshtriplett.org,
	urezki@gmail.com, dave@stgolabs.net
Cc: stern@rowland.harvard.edu, parri.andrea@gmail.com,
	will@kernel.org, dhowells@redhat.com, j.alglave@ucl.ac.uk,
	luc.maranget@inria.fr, akiyks@gmail.com, dlustig@nvidia.com,
	joelagnelf@nvidia.com, skhan@linuxfoundation.org,
	rdunlap@infradead.org, longman@redhat.com, rostedt@goodmis.org,
	qiang.zhang@linux.dev, kunwu.chan@gmail.com,
	brads@mainlining.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, lkmm@lists.linux.dev,
	linux-doc@vger.kernel.org, rcu@vger.kernel.org,
	linux-kselftest@vger.kernel.org
Subject: [PATCH 02/28] hazptr: Use Bloom filter for shared scan waiters
Date: Thu,  5 Nov 2026 00:54:20 +0800	[thread overview]
Message-ID: <20261104165504.2430480-3-kunwu.chan@gmail.com> (raw)
In-Reply-To: <20261104165504.2430480-1-kunwu.chan@gmail.com>

Replace the per-waiter sequential scan with a shared Bloom filter
built during a single walk: each observed non-wildcard address
sets three bits.  A waiter whose address hashes to an unset bit
can be completed without another slot walk.

A Bloom filter has no false negatives, so an address absent from
the scan cannot be held by an observed slot; false positives only
delay completion to a later scan cycle.

The filter uses a one-page bitmap with three multiply-shift hash
functions.  It lives in the hazptr_scan_state and is only touched
by the scan kthread.

Suggested-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Kunwu Chan <kunwu.chan@gmail.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Bradley Morgan <brads@mainlining.org>
---
 kernel/hazptr.c | 122 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 116 insertions(+), 6 deletions(-)

diff --git a/kernel/hazptr.c b/kernel/hazptr.c
index 013c24021c43..059c356ceaa7 100644
--- a/kernel/hazptr.c
+++ b/kernel/hazptr.c
@@ -16,6 +16,8 @@
 #include <linux/kthread.h>
 #include <linux/swait.h>
 #include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/bitmap.h>
 
 #define HAZPTR_WILDCARD	((void *) 1UL)
 
@@ -57,6 +59,12 @@ unsigned int flip_list_phase(unsigned int phase)
 	return 1 - phase;
 }
 
+static
+bool is_wildcard(void *addr)
+{
+	return (unsigned long)addr == (unsigned long)HAZPTR_WILDCARD;
+}
+
 static
 struct hazptr_slot_item *hazptr_get_free_percpu_slot_item(void)
 {
@@ -252,6 +260,98 @@ static void hazptr_scan_overflow_list_all(void *addr)
 	}
 }
 
+/* Number of hash functions for the Bloom filter. */
+#define HAZPTR_BLOOM_HASHES 3
+
+/* Number of bits in the Bloom filter bitmap: one page. */
+#define HAZPTR_BLOOM_NBITS (PAGE_SIZE * 8)
+
+struct hazptr_bloom {
+	unsigned long map[PAGE_SIZE / sizeof(unsigned long)];
+};
+
+/*
+ * Multiply @addr by a per-hash odd constant and use the high bits
+ * as the Bloom filter index.
+ */
+static unsigned long hazptr_bloom_hash(void *addr, unsigned int i)
+{
+	static const u64 mult[HAZPTR_BLOOM_HASHES] = {
+		0x9E3779B97F4A7C15ULL,
+		0xC2B2AE3D27D4EB4FULL,
+		0x165667B19E3779F9ULL,
+	};
+	u64 hash = (u64)(unsigned long)addr * mult[i];
+
+	return hash >> (64 - ilog2(HAZPTR_BLOOM_NBITS));
+}
+
+static void hazptr_bloom_reset(struct hazptr_bloom *bloom)
+{
+	bitmap_zero(bloom->map, HAZPTR_BLOOM_NBITS);
+}
+
+static void hazptr_bloom_add(struct hazptr_bloom *bloom, void *addr)
+{
+	unsigned int i;
+
+	for (i = 0; i < HAZPTR_BLOOM_HASHES; i++)
+		__set_bit(hazptr_bloom_hash(addr, i), bloom->map);
+}
+
+static bool hazptr_bloom_contains(const struct hazptr_bloom *bloom, void *addr)
+{
+	unsigned int i;
+
+	for (i = 0; i < HAZPTR_BLOOM_HASHES; i++)
+		if (!test_bit(hazptr_bloom_hash(addr, i), bloom->map))
+			return false;
+	return true;
+}
+
+/*
+ * Walk all slots and record observed non-wildcard addresses into
+ * the Bloom filter.  A single pass suffices on the try_acquire
+ * fast path (readers publish their target directly).
+ */
+static void hazptr_scan_walk(struct hazptr_bloom *bloom)
+{
+	int cpu;
+
+	hazptr_bloom_reset(bloom);
+
+	for_each_possible_cpu(cpu) {
+		struct hazptr_percpu_slots *percpu_slots = per_cpu_ptr(&hazptr_percpu_slots, cpu);
+		struct hazptr_overflow_list_flip *overflow_list_flip = per_cpu_ptr(&percpu_overflow_list_flip, cpu);
+		unsigned int idx;
+
+		for (idx = 0; idx < NR_HAZPTR_PERCPU_SLOTS; idx++) {
+			struct hazptr_slot_item *item = &percpu_slots->items[idx];
+			void *v;
+
+			v = smp_load_acquire(&item->slot.addr);
+			if (v && !is_wildcard(v))
+				hazptr_bloom_add(bloom, v);
+		}
+		for (int i = 0; i < 2; i++) {
+			struct hazptr_overflow_list *list = &overflow_list_flip->array[i];
+			struct hazptr_backup_slot *b;
+			unsigned long flags;
+
+			raw_spin_lock_irqsave(&list->lock, flags);
+			hlist_for_each_entry(b, &list->head, overflow_node) {
+				void *v;
+
+				v = smp_load_acquire(&b->slot.addr);
+				if (v && !is_wildcard(v))
+					hazptr_bloom_add(bloom, v);
+			}
+			raw_spin_unlock_irqrestore(&list->lock, flags);
+		}
+	}
+}
+
+/* Need is_wildcard for the Bloom filter */
 /*
  * Shared scan: batch concurrent hazptr_synchronize() callers into a
  * single kthread-driven scan, avoiding redundant per-CPU and
@@ -272,6 +372,7 @@ struct hazptr_scan_state {
 	struct mutex lock;
 	struct list_head pending;
 	struct list_head scanning;	/* kthread only */
+	struct hazptr_bloom bloom;	/* kthread only */
 };
 static struct hazptr_scan_state hazptr_scan;
 
@@ -315,19 +416,28 @@ static void hazptr_scan_do_cycle(void)
 	}
 
 	/*
-	 * Process each waiter: scan per-CPU slots and overflow lists
-	 * until the waiter's address is released.  This is the same
-	 * scan the direct fallback performs, delegated to a kthread so
-	 * callers sleep instead of busy-waiting.
+	 * Walk all slots and record observed addresses into the
+	 * Bloom filter, then complete waiters whose address is
+	 * not present.  On the try_acquire fast path, readers
+	 * publish their target directly (no wildcard transient),
+	 * so a single pass suffices.
 	 */
+	hazptr_scan_walk(&hazptr_scan.bloom);
+
+	list_for_each_entry_safe(w, n, &hazptr_scan.scanning, node) {
+		if (!hazptr_bloom_contains(&hazptr_scan.bloom, w->addr))
+			list_move(&w->node, &done);
+	}
+
+	mutex_unlock(&hazptr_phase_lock);
+
+	/* Waiters still blocked: their address was observed present. */
 	list_for_each_entry_safe(w, n, &hazptr_scan.scanning, node) {
 		hazptr_scan_cpu_slots(w->addr);
 		hazptr_scan_overflow_list_all(w->addr);
 		list_move(&w->node, &done);
 	}
 
-	mutex_unlock(&hazptr_phase_lock);
-
 	list_for_each_entry_safe(w, n, &done, node) {
 		list_del_init(&w->node);
 		complete(&w->done);
-- 
2.43.0


  parent reply	other threads:[~2026-11-04 16:55 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 16:54 [PATCH 00/28] hazptr: shared-scan kthread, drain-assist, and stall detector Kunwu Chan
2026-11-04 16:54 ` [PATCH 01/28] hazptr: Add shared scan kthread Kunwu Chan
2026-11-04 16:54 ` Kunwu Chan [this message]
2026-11-04 16:54 ` [PATCH 03/28] hazptr: Add scoped_guard() support Kunwu Chan
2026-11-04 16:54 ` [PATCH 04/28] hazptr: Add debug option to force the acquire slow path Kunwu Chan
2026-11-04 16:54 ` [PATCH 05/28] Documentation/litmus-tests: Add hazptr wildcard-flip escape test Kunwu Chan
2026-11-04 16:54 ` [PATCH 06/28] Documentation/litmus-tests: Add hazptr acquire-before-scan test Kunwu Chan
2026-11-04 16:54 ` [PATCH 07/28] hazptr: Fix kernel-doc of hazptr_release() Kunwu Chan
2026-11-04 16:54 ` [PATCH 08/28] hazptrtorture: Add slowpath and lockdep scenarios Kunwu Chan
2026-11-04 16:54 ` [PATCH 09/28] hazptrtorture: Add READERS4 and READERS0 torture configs Kunwu Chan
2026-11-04 16:54 ` [PATCH 10/28] hazptrtorture: Add 128- and 256-CPU configs Kunwu Chan
2026-11-04 16:54 ` [PATCH 11/28] selftests/rcutorture: Add hazptr torture test script Kunwu Chan
2026-11-04 16:54 ` [PATCH 12/28] hazptr: Remove per-waiter scan fallback, simplify synchronize Kunwu Chan
2026-11-04 16:54 ` [PATCH 13/28] hazptr: Add waiter-enqueue tracepoint Kunwu Chan
2026-11-04 16:54 ` [PATCH 14/28] hazptr: Add waiter stall detector Kunwu Chan
2026-11-04 16:54 ` [PATCH 15/28] hazptr: Add reader-assisted drain for stalled waiters Kunwu Chan
2026-11-04 16:54 ` [PATCH 16/28] Documentation/litmus-tests: Add hazptr drain engage-wildcard test Kunwu Chan
2026-11-04 16:54 ` [PATCH 17/28] Documentation/litmus-tests: Add hazptr drain resnapshot-slot-race test Kunwu Chan
2026-11-04 16:54 ` [PATCH 18/28] Documentation/litmus-tests: Add hazptr drain safety test Kunwu Chan
2026-11-04 16:54 ` [PATCH 19/28] Documentation/litmus-tests: Add hazptr drain generation-visibility test Kunwu Chan
2026-11-04 16:54 ` [PATCH 20/28] locking/lockdep: Use hazptr to wait for dynamic key lookups Kunwu Chan
2026-11-04 16:54 ` [PATCH 21/28] hazptrtorture: Add HOTADDR and LONGHOLD scenarios Kunwu Chan
2026-11-04 16:54 ` [PATCH 22/28] hazptrtorture: Add drain fairness rotation scenario Kunwu Chan
2026-11-04 16:54 ` [PATCH 23/28] rcuscale: Add hazptr scale type Kunwu Chan
2026-11-04 16:54 ` [PATCH 24/28] hazptr: Add runtime sysfs controls for stall detector Kunwu Chan
2026-11-04 16:54 ` [PATCH 25/28] hazptr: Select TRACING for HAZPTR_TORTURE_TEST to enable tracepoint Kunwu Chan
2026-11-04 16:54 ` [PATCH 26/28] hazptrtorture: Add torture_type=none clean skip for rcuscale coexistence Kunwu Chan
2026-11-04 16:54 ` [PATCH 27/28] hazptr: Add Bloom false-positive exact-match fallback Kunwu Chan
2026-11-04 16:54 ` [PATCH 28/28] Documentation/litmus-tests: Add hazptr bloom wildcard-hole test Kunwu Chan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261104165504.2430480-3-kunwu.chan@gmail.com \
    --to=kunwu.chan@gmail.com \
    --cc=akiyks@gmail.com \
    --cc=boqun@kernel.org \
    --cc=brads@mainlining.org \
    --cc=corbet@lwn.net \
    --cc=dave@stgolabs.net \
    --cc=dhowells@redhat.com \
    --cc=dlustig@nvidia.com \
    --cc=frederic@kernel.org \
    --cc=j.alglave@ucl.ac.uk \
    --cc=jiangshanlai@gmail.com \
    --cc=joelagnelf@nvidia.com \
    --cc=josh@joshtriplett.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=lkmm@lists.linux.dev \
    --cc=longman@redhat.com \
    --cc=luc.maranget@inria.fr \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mingo@redhat.com \
    --cc=neeraj.upadhyay@kernel.org \
    --cc=parri.andrea@gmail.com \
    --cc=paulmck@kernel.org \
    --cc=qiang.zhang@linux.dev \
    --cc=rcu@vger.kernel.org \
    --cc=rdunlap@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=skhan@linuxfoundation.org \
    --cc=stern@rowland.harvard.edu \
    --cc=urezki@gmail.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®