[PATCH 3/7] ARM: dts: arm/vexpress-v2m: Move regulator and led nodes out of bus

["Rob Herring (Arm)" <robh@kernel.org>]

The regulator and led nodes are not MMIO devices, so they don't belong
in a "simple-bus" node. Move them to the root level. This mirrors the
change already done in vexpress-v2m-rs1.dtsi.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/arm/vexpress-v2m.dtsi | 162 ++++++++++++++++----------------
 1 file changed, 81 insertions(+), 81 deletions(-)

diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
index 2a8d1d6dfc7e..e368f04bf513 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -20,6 +20,87 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
+	v2m_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: clock-1000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
 	bus@40000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -423,87 +504,6 @@ clcd_pads_mb: endpoint {
 					};
 				};
 			};
-
-			v2m_fixed_3v3: regulator-3v3 {
-				compatible = "regulator-fixed";
-				regulator-name = "3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			v2m_clk24mhz: clock-24000000 {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <24000000>;
-				clock-output-names = "v2m:clk24mhz";
-			};
-
-			v2m_refclk1mhz: clock-1000000 {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <1000000>;
-				clock-output-names = "v2m:refclk1mhz";
-			};
-
-			v2m_refclk32khz: clock-32768 {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <32768>;
-				clock-output-names = "v2m:refclk32khz";
-			};
-
-			leds {
-				compatible = "gpio-leds";
-
-				led-user1 {
-					label = "v2m:green:user1";
-					gpios = <&v2m_led_gpios 0 0>;
-					linux,default-trigger = "heartbeat";
-				};
-
-				led-user2 {
-					label = "v2m:green:user2";
-					gpios = <&v2m_led_gpios 1 0>;
-					linux,default-trigger = "mmc0";
-				};
-
-				led-user3 {
-					label = "v2m:green:user3";
-					gpios = <&v2m_led_gpios 2 0>;
-					linux,default-trigger = "cpu0";
-				};
-
-				led-user4 {
-					label = "v2m:green:user4";
-					gpios = <&v2m_led_gpios 3 0>;
-					linux,default-trigger = "cpu1";
-				};
-
-				led-user5 {
-					label = "v2m:green:user5";
-					gpios = <&v2m_led_gpios 4 0>;
-					linux,default-trigger = "cpu2";
-				};
-
-				led-user6 {
-					label = "v2m:green:user6";
-					gpios = <&v2m_led_gpios 5 0>;
-					linux,default-trigger = "cpu3";
-				};
-
-				led-user7 {
-					label = "v2m:green:user7";
-					gpios = <&v2m_led_gpios 6 0>;
-					linux,default-trigger = "cpu4";
-				};
-
-				led-user8 {
-					label = "v2m:green:user8";
-					gpios = <&v2m_led_gpios 7 0>;
-					linux,default-trigger = "cpu5";
-				};
-			};
 		};
 	};
 };

-- 
2.53.0