From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=pass header.oldest-pass=0 smtp.remote-ip=100.103.45.18 ARC-Seal: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=pass; t=1793932490; b=F3Eolkn2EYfbPzrkgtxyHI+gWUS0Tttw943XzjYzqJAYW+q9nCs5994LZDHmX2Rh2LQa eocpwxco1c6x9csJFaaLx9CAVDfSFjvmKvIZGUzv6j3PSX6QzDuCtG0ZN7lbEsZHHZapU X7/+xff4PCytsY5NBj5Z6v4O47K7hKktdALvFCKoplWszSlvFdqYJhxdl2UyTTBrbUiDW ANvw7LFSso/xXGJ7Oxt6nhC4gcogrV5TY0LJ+QS441rHZkF7g0ciLNVi+o/f0TucxErMN 362TblUob20kGVArG40MpwyQNJyh1NDBOyHtRRg1HHJFpsk6D0cM9oKgXzXCDeN/WuA== ARC-Message-Signature: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1793932490; h=Received:DKIM-Signature:Received:From:Date:Subject:MIME-Version: Content-Type:Message-Id:References:In-Reply-To:To:Cc:X-Mailer: X-Developer-Signature:X-Developer-Key:X-Endpoint-Received: X-Original-From:Reply-To:Content-Transfer-Encoding; bh=y6KF4R247iQ85ovX/UvFXhlHniih+KCOSolqz3Ktj5k=; b=3gYA+pxYO6w/dskpQLbQkeAPyNixCvV9QxOjjn1h4EXciZcPzvi6NLcOJA7yPA1RL0tr 1bV522g16WOBaviP5v7/gFDVVf9apMlTsHz0YA3xC9VtlrTFJm7LWWbACBmuKTj107+ni +mTd/zEspYVnek/Myh6oF10wvajonlPWTB8mjr5RcTtCaXc/aosav346eSlvIk3EshDFZ TJsA8CHuGxKK8O8piVIE97snKjIbXmFtm0dbQrFLv6j6y4dN9wuiUbOVtw9gFfxADYUIR +1y9FvJM4UeL4I4BU4gPp0+jJHOeSGkC4lP2Mo13n4Uh5LOldGWS0dDOGXEknfwti7g== ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dkim=pass header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20260515 header.b=AJCsIj26; arc=pass header.oldest-pass=0 smtp.remote-ip=100.103.45.18 Received: from smtp.kernel.org (quasi.space.kernel.org [100.103.45.18]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6BEEC606A330 for ; Fri, 6 Nov 2026 02:34:49 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key, unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20260515 header.b=AJCsIj26 Authentication-Results: smtp.kernel.org; arc=none smtp.remote-ip=100.80.115.77 ARC-Seal: i=1; d=kernel.org; s=arc20260519; a=rsa-sha256; cv=none; t=1793932489; b=VvlGdy5y3h9EedzIlh0yNI6PqUZ7YNE/VzLPID3ZPzmuZvBSntlIJrIcTcX6QB+hnNER ePbnIMtobJeeMi8MXHEKEi+AIx6JS9QEvDfSDrf4fOaeNqsgEdtt+co8m9bsS2fdBqWsO nNvKEuquXASVm4WGu4hF0Y5yjTSScRqnyZRaKMg40yOjqqbFfmtsktE/c0Qzc+wNvCdkx XEFNEk87LDo7MWN9WIYe6cSW+m5+PRWnY/xhm32lhKAe3Cu5fFy5ndbYiqW9gxXUm4M16 E3um/9VuUPLhZOUQ/yCdunC4paTnM8Zo7cHsuFKyBD+F/rQih4SZfPJm0iHPTnBfZZQ== ARC-Message-Signature: i=1; d=kernel.org; s=arc20260519; a=rsa-sha256; c=relaxed/relaxed; t=1793932489; h=DKIM-Signature:Received:From:Date:Subject:MIME-Version:Content-Type: Message-Id:References:In-Reply-To:To:Cc:X-Mailer: X-Developer-Signature:X-Developer-Key:X-Endpoint-Received: X-Original-From:Reply-To:Content-Transfer-Encoding; bh=y6KF4R247iQ85ovX/UvFXhlHniih+KCOSolqz3Ktj5k=; b=Fa8pys0ouJtbJ1/SQAK/V4YKygwWY2sjTxCnf1+aYS5lrF4dUFBuTUowqXFP0CB/sUpm HenMRwFtruTwxdb9mgtK1hXU4/YspTurBfENVTNm7hZlF1dXk9psDgURWdybcreA6dBNv 6WmXtcMLY6Gtd4zigC2M0/LH2Gm383K7DOH2MFvdq0UxY0h3KtPLsmUW4nvxGkWns6OiD +qbMOMlWVMdvDDVPqMWzUtowiMnbtPPH8mJjJhyyQbBTlsOnCR9TbiRs5OGk4Di0K8XJa 0xT65xNMpfLvYQ0GcawXQ46mB+dEqk3U1Yog9G2Q4KRn1yk85H53kzBYzJ/VyjYdc7A== ARC-Authentication-Results: i=1; smtp.kernel.org; arc=none smtp.remote-ip=100.80.115.77 Received: from lkml.kernel.org (nexus.subspace.kernel.org [100.80.115.77]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.kernel.org (Postfix) with ESMTPS id 70EB01F008A3; Fri, 6 Nov 2026 02:34:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=kernel.org; s=k20260515; t=1793932489; bh=y6KF4R247iQ85ovX/UvFXhlHniih+KCOSolqz3Ktj5k=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To; b=AJCsIj26qGFuyaf5q5vOCxMEwfPzt7v7vkpbxJL+CUbmMVixHi9TsY/br4j4p96Tg nSVFluB5S/62UrL1G8HjhRukQpthqyAf41YcbYQWMtWlShXuElk80cqlFeh84GMJBA pBrM+rJgKWlf3piQQ6u7vYpNk9UGI0o1vVAky+b/XpWV3wxac3T9zB1/Xio9Ft5/84 TYcnHCOLJvZfDrKItUhVqSAFl+x1l3SARRcJtfZ/WJOZAUo7j5O46cOpotJNFc/17u 4fKS8NncBpC4FvYfEyHlFx75twrOgRBxhKJF2p2PDJPMV6atk8aD1QS5OYg3RsFiG/ mU4mvmGQSzIWQ== Received: from nexus.subspace.kernel.org (localhost [IPv6:::1]) by lkml.kernel.org (Postfix) with ESMTP id D81D945B2A; Fri, 6 Nov 2026 02:34:43 +0000 (UTC) From: Angel Gabriel Crispin Valdivia via B4 Relay Date: Thu, 05 Nov 2026 21:34:33 -0500 Subject: [PATCH RFC 1/4] drm/fl2000: Add USB driver with register and I2C access X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Message-Id: <20261105-fl2000-upstream-v1-1-bb163ecb2309@gmail.com> References: <20261105-fl2000-upstream-v1-0-bb163ecb2309@gmail.com> In-Reply-To: <20261105-fl2000-upstream-v1-0-bb163ecb2309@gmail.com> To: Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Simona Vetter , Angel Gabriel Crispin Valdivia Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org X-Mailer: b4 0.15.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1793932482; l=40703; i=angelcrispinvaldivia@gmail.com; s=20261106; h=from:subject:message-id; bh=JTHGCKQj0/0JHjDIQpllttA/ez67tTJv7hDjXfwm/sg=; b=fye7SSyc/0HDj5ds4k6ywum5Aaz0yF6moB5OAQdo0dKvxzwKtbx6YyhNGOQekPsy7m0u8ALA7 wzVzwbS8mnKABGrB0z/H7vKPD7mEPZC5mqRCtBntgzgHc9CeaQHVKt9 X-Developer-Key: i=angelcrispinvaldivia@gmail.com; a=ed25519; pk=80bQU/p2R0pLIfdfJaB5I/2obI+RxQHondq5DEM0tbg= X-Endpoint-Received: by B4 Relay for angelcrispinvaldivia@gmail.com/20261106 with auth_id=1425 X-Original-From: Angel Gabriel Crispin Valdivia Reply-To: angelcrispinvaldivia@gmail.com Content-Transfer-Encoding: 7bit From: Angel Gabriel Crispin Valdivia The Fresco Logic FL2000DX is a USB 3.0 display controller used in inexpensive USB to VGA and USB to HDMI adapters (USB ID 1d5c:2000). The FL2000 itself outputs parallel RGB/VGA; HDMI adapters pair it with an ITE IT66121 HDMI transmitter that sits on the FL2000's I2C bus. This first patch adds the USB side of the driver: it binds the three FL2000 interfaces, describes the FL2000 registers, provides a regmap on top of the vendor control transfers that access them, and registers an I2C adapter backed by the FL2000 I2C engine. The engine only transfers aligned 32-bit words, so byte accesses are done as read-modify-write of the containing word and the adapter advertises the matching quirks. State shared by the interfaces is attached to the usb_device so that it survives the unbind/rebind cycles of usb_reset_device(). The driver is based on the out-of-tree fl2000_drm driver by Artem Mygaiev, which carries code from the Fresco Logic reference driver. Signed-off-by: Angel Gabriel Crispin Valdivia --- MAINTAINERS | 7 + drivers/gpu/drm/Kconfig | 1 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/fl2000/Kconfig | 19 ++ drivers/gpu/drm/fl2000/Makefile | 8 + drivers/gpu/drm/fl2000/fl2000.h | 88 ++++++++ drivers/gpu/drm/fl2000/fl2000_drv.c | 150 ++++++++++++++ drivers/gpu/drm/fl2000/fl2000_i2c.c | 182 +++++++++++++++++ drivers/gpu/drm/fl2000/fl2000_registers.c | 320 ++++++++++++++++++++++++++++++ drivers/gpu/drm/fl2000/fl2000_registers.h | 272 +++++++++++++++++++++++++ 10 files changed, 1048 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c10342aa3..6e74cb478 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8324,6 +8324,13 @@ F: include/linux/aperture.h F: include/linux/sysfb.h F: include/video/nomodeset.h +DRM DRIVER FOR FRESCO LOGIC FL2000 USB DISPLAY ADAPTERS +M: Angel Gabriel Crispin Valdivia +L: dri-devel@lists.freedesktop.org +S: Maintained +T: git https://gitlab.freedesktop.org/drm/misc/kernel.git +F: drivers/gpu/drm/fl2000/ + DRM DRIVER FOR GENERIC EDP PANELS R: Douglas Anderson F: Documentation/devicetree/bindings/display/panel/panel-edp.yaml diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 61111d50b..6ff093830 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -313,6 +313,7 @@ source "drivers/gpu/drm/atmel-hlcdc/Kconfig" source "drivers/gpu/drm/bridge/Kconfig" source "drivers/gpu/drm/etnaviv/Kconfig" source "drivers/gpu/drm/exynos/Kconfig" +source "drivers/gpu/drm/fl2000/Kconfig" source "drivers/gpu/drm/fsl-dcu/Kconfig" source "drivers/gpu/drm/gma500/Kconfig" source "drivers/gpu/drm/gud/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 2c6bc093a..a4a8a958a 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -190,6 +190,7 @@ obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/ obj-$(CONFIG_DRM_EXYNOS) +=exynos/ obj-$(CONFIG_DRM_ROCKCHIP) +=rockchip/ obj-$(CONFIG_DRM_GMA500) += gma500/ +obj-$(CONFIG_DRM_FL2000) += fl2000/ obj-$(CONFIG_DRM_UDL) += udl/ obj-$(CONFIG_DRM_AST) += ast/ obj-$(CONFIG_DRM_ARMADA) += armada/ diff --git a/drivers/gpu/drm/fl2000/Kconfig b/drivers/gpu/drm/fl2000/Kconfig new file mode 100644 index 000000000..bf1badc3e --- /dev/null +++ b/drivers/gpu/drm/fl2000/Kconfig @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DRM_FL2000 + tristate "Fresco Logic FL2000 USB display adapters" + depends on DRM && USB && MMU + depends on USB_ARCH_HAS_HCD + select DRM_BRIDGE_CONNECTOR + select DRM_CLIENT_SELECTION + select DRM_DISPLAY_HELPER + select DRM_GEM_SHMEM_HELPER + select DRM_KMS_HELPER + select I2C + select REGMAP + select REGMAP_I2C + help + This is a KMS driver for USB display adapters based on the + Fresco Logic FL2000DX USB 3.0 to VGA controller, paired with an + ITE IT66121 HDMI transmitter (USB ID 1d5c:2000). + + If M is selected the module will be called fl2000. diff --git a/drivers/gpu/drm/fl2000/Makefile b/drivers/gpu/drm/fl2000/Makefile new file mode 100644 index 000000000..2b3a2f151 --- /dev/null +++ b/drivers/gpu/drm/fl2000/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only + +fl2000-y := \ + fl2000_drv.o \ + fl2000_i2c.o \ + fl2000_registers.o + +obj-$(CONFIG_DRM_FL2000) += fl2000.o diff --git a/drivers/gpu/drm/fl2000/fl2000.h b/drivers/gpu/drm/fl2000/fl2000.h new file mode 100644 index 000000000..956032479 --- /dev/null +++ b/drivers/gpu/drm/fl2000/fl2000.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2017, Fresco Logic, Incorporated. + * (C) Copyright 2018-2020, Artem Mygaiev + */ + +#ifndef FL2000_H +#define FL2000_H + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fl2000_registers.h" + +/* Known USB interfaces of FL2000 */ +enum fl2000_interface { + FL2000_USBIF_AVCONTROL = 0, + FL2000_USBIF_STREAMING = 1, + FL2000_USBIF_INTERRUPT = 2, +}; + +struct fl2000_timings { + u32 hactive; + u32 htotal; + u32 hsync_width; + u32 hstart; + u32 vactive; + u32 vtotal; + u32 vsync_width; + u32 vstart; +}; + +struct fl2000_pll { + u32 prescaler; + u32 multiplier; + u32 divisor; + u32 function; +}; + +/* Polling interval and timeout in us for I2C read/write operations */ +#define I2C_RDWR_INTERVAL 200 +#define I2C_RDWR_TIMEOUT (256 * 1000) + +/* I2C adapter interface creation */ +struct i2c_adapter *fl2000_i2c_init(struct usb_device *usb_dev); +int fl2000_ddc_read_block(struct i2c_adapter *adapter, u8 *buf, unsigned int block, size_t len); + +/* Register map creation */ +struct regmap *fl2000_regmap_init(struct usb_device *usb_dev); +void fl2000_regmap_drop_cache(struct usb_device *usb_dev); + +/* Registers interface */ +int fl2000_reset(struct usb_device *usb_dev); +int fl2000_usb_magic(struct usb_device *usb_dev); +int fl2000_afe_magic(struct usb_device *usb_dev); +int fl2000_set_transfers(struct usb_device *usb_dev); +int fl2000_set_pixfmt(struct usb_device *usb_dev, u32 bytes_pix); +int fl2000_set_timings(struct usb_device *usb_dev, struct fl2000_timings *timings); +int fl2000_set_pll(struct usb_device *usb_dev, struct fl2000_pll *pll); +int fl2000_force_connect(struct usb_device *usb_dev, bool force); +int fl2000_enable_interrupts(struct usb_device *usb_dev); +int fl2000_read_status(struct usb_device *usb_dev, u32 *status); +int fl2000_i2c_dword(struct usb_device *usb_dev, bool read, u16 addr, u8 offset, u32 *data); + +#endif /* FL2000_H */ diff --git a/drivers/gpu/drm/fl2000/fl2000_drv.c b/drivers/gpu/drm/fl2000/fl2000_drv.c new file mode 100644 index 000000000..ea089d3c1 --- /dev/null +++ b/drivers/gpu/drm/fl2000/fl2000_drv.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2017, Fresco Logic, Incorporated. + * (C) Copyright 2018-2020, Artem Mygaiev + */ + +#include "fl2000.h" + +#define USB_CLASS_AV 0x10 +#define USB_SUBCLASS_AV_CONTROL 0x01 +#define USB_SUBCLASS_AV_VIDEO 0x02 +#define USB_SUBCLASS_AV_AUDIO 0x03 + +#define USB_VENDOR_FRESCO_LOGIC 0x1D5C +#define USB_PRODUCT_FL2000 0x2000 + +static const struct usb_device_id fl2000_id_table[] = { + { USB_DEVICE_INTERFACE_CLASS(USB_VENDOR_FRESCO_LOGIC, USB_PRODUCT_FL2000, USB_CLASS_AV) }, + {}, +}; +MODULE_DEVICE_TABLE(usb, fl2000_id_table); + +/* Devices that are independent of interfaces, created for the lifetime of the USB device */ +struct fl2000_devs { + struct regmap *regmap; + struct i2c_adapter *adapter; + int active_if; +}; + +static struct fl2000_devs *fl2000_get_devices(struct usb_device *usb_dev) +{ + struct fl2000_devs *devs; + + devs = devm_kzalloc(&usb_dev->dev, sizeof(*devs), GFP_KERNEL); + if (!devs) + return ERR_PTR(-ENOMEM); + + devs->regmap = fl2000_regmap_init(usb_dev); + if (IS_ERR(devs->regmap)) { + dev_err(&usb_dev->dev, "Cannot initialize regmap (%pe)\n", devs->regmap); + return ERR_CAST(devs->regmap); + } + + devs->adapter = fl2000_i2c_init(usb_dev); + if (IS_ERR(devs->adapter)) { + dev_err(&usb_dev->dev, "Cannot initialize I2C adapter (%pe)\n", devs->adapter); + return ERR_CAST(devs->adapter); + } + + dev_set_drvdata(&usb_dev->dev, devs); + + return devs; +} + +static int fl2000_probe(struct usb_interface *interface, const struct usb_device_id *usb_dev_id) +{ + int ret = 0; + u8 iface_num = interface->cur_altsetting->desc.bInterfaceNumber; + struct usb_device *usb_dev = interface_to_usbdev(interface); + struct fl2000_devs *devs = dev_get_drvdata(&usb_dev->dev); + + if (usb_dev->speed < USB_SPEED_HIGH) { + dev_err(&usb_dev->dev, "USB 1.1 is not supported\n"); + return -ENODEV; + } + + if (!devs) { + devs = fl2000_get_devices(usb_dev); + if (IS_ERR(devs)) + return PTR_ERR(devs); + } + + switch (iface_num) { + case FL2000_USBIF_AVCONTROL: + case FL2000_USBIF_STREAMING: + case FL2000_USBIF_INTERRUPT: + devs->active_if |= BIT(iface_num); + break; + + default: + /* Device does not have any other interfaces */ + dev_warn(&interface->dev, "Unexpected interface %d\n", iface_num); + ret = -ENODEV; + break; + } + + return ret; +} + +static void fl2000_disconnect(struct usb_interface *interface) +{ + u8 iface_num = interface->cur_altsetting->desc.bInterfaceNumber; + struct usb_device *usb_dev = interface_to_usbdev(interface); + struct fl2000_devs *devs = dev_get_drvdata(&usb_dev->dev); + + if (!devs) + return; + + switch (iface_num) { + case FL2000_USBIF_AVCONTROL: + case FL2000_USBIF_STREAMING: + case FL2000_USBIF_INTERRUPT: + devs->active_if &= ~BIT(iface_num); + break; + + default: + /* Device does not have any other interfaces */ + dev_warn(&interface->dev, "Unexpected interface %d\n", iface_num); + break; + } +} + +static int fl2000_suspend(struct usb_interface *interface, pm_message_t message) +{ + struct usb_device *usb_dev = interface_to_usbdev(interface); + + /* + * Nothing to save yet. Providing the callback keeps the USB core from + * unbinding the driver across system sleep. + */ + dev_dbg(&usb_dev->dev, "suspend\n"); + + return 0; +} + +static int fl2000_resume(struct usb_interface *interface) +{ + struct usb_device *usb_dev = interface_to_usbdev(interface); + + dev_dbg(&usb_dev->dev, "resume\n"); + + return 0; +} + +static struct usb_driver fl2000_driver = { + .name = KBUILD_MODNAME, + .probe = fl2000_probe, + .disconnect = fl2000_disconnect, + .suspend = fl2000_suspend, + .resume = fl2000_resume, + .id_table = fl2000_id_table, + .supports_autosuspend = false, + .disable_hub_initiated_lpm = true, +}; + +module_usb_driver(fl2000_driver); + +MODULE_AUTHOR("Artem Mygaiev"); +MODULE_DESCRIPTION("FL2000 USB display driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/fl2000/fl2000_i2c.c b/drivers/gpu/drm/fl2000/fl2000_i2c.c new file mode 100644 index 000000000..eadbe0f67 --- /dev/null +++ b/drivers/gpu/drm/fl2000/fl2000_i2c.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2017, Fresco Logic, Incorporated. + * (C) Copyright 2018-2019, Artem Mygaiev + */ + +#include + +#include + +#include "fl2000.h" + +/* + * The I2C controller requires a mandatory 8-bit sub-address for any read/write operation. Each + * read or write operates on 8-bit data. Every exchange shall consist of 2 messages (sub-address + + * data) combined. The USB transfer always aligns the address to a 4-byte boundary. + */ +#define I2C_CMESSAGES_NUM 2 +#define I2C_REG_ADDR_SIZE (sizeof(u8)) +#define I2C_REG_DATA_SIZE (sizeof(u8)) +#define I2C_XFER_ADDR_MASK (~0x3ul) + +static inline int fl2000_i2c_read_dword(struct usb_device *usb_dev, u16 addr, u8 offset, u32 *data) +{ + return fl2000_i2c_dword(usb_dev, true, addr, offset, data); +} + +static inline int fl2000_i2c_write_dword(struct usb_device *usb_dev, u16 addr, u8 offset, u32 *data) +{ + return fl2000_i2c_dword(usb_dev, false, addr, offset, data); +} + +static int fl2000_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + int ret; + bool read; + u16 addr; + u8 idx; + u8 offset; + u32 data; + + addr = msgs[0].addr; + offset = msgs[0].buf[0] & I2C_XFER_ADDR_MASK; + idx = msgs[0].buf[0] - offset; + + /* + * We expect the following: + * - 2 messages, each 1 byte, first write then read + * - 1 message, 2 bytes, write + */ + if (num == 2) { + read = true; + } else if (num == 1) { + if (msgs[0].len == 2 && !(msgs[0].flags & I2C_M_RD)) + read = false; + else + return -EOPNOTSUPP; + } else { + return -EOPNOTSUPP; + } + + /* + * The FL2000 I2C engine only transfers aligned dwords, so the offset is aligned down to a + * 4-byte boundary and the requested byte is picked out of (or merged into) the dword. + */ + if (read) { + ret = fl2000_i2c_read_dword(adapter->algo_data, addr, offset, &data); + if (ret) + return ret; + + msgs[1].buf[0] = data >> (idx * 8); + } else { + /* + * Since the FL2000 I2C engine always operates on 4-byte messages, we need to read + * before write in order not to corrupt the unrelated registers of the same dword. + */ + ret = fl2000_i2c_read_dword(adapter->algo_data, addr, offset, &data); + if (ret) + return ret; + + data &= ~(0xffU << (idx * 8)); + data |= (u32)msgs[0].buf[1] << (idx * 8); + + ret = fl2000_i2c_write_dword(adapter->algo_data, addr, offset, &data); + if (ret) + return ret; + } + + return num; +} + +/* + * Monitor DDC on the FL2000 bus. The bridge's own EDID FIFO does not work on the tested boards, and + * the VGA connector has no bridge at all, so EDID is read with the FL2000 I2C engine at address + * 0x50, 4 bytes per operation with an 8-bit offset, which covers EDID blocks 0 and 1. + */ +#define FL2000_DDC_ADDR 0x50 + +/** + * fl2000_ddc_read_block() - read one EDID block through the FL2000 I2C engine + * @adapter: the FL2000 I2C adapter + * @buf: destination, @len bytes + * @block: EDID block number (0 or 1) + * @len: bytes to read, at most EDID_LENGTH + * + * The signature matches what drm_edid_read_custom() expects, with the adapter as context. + * + * Return: 0 on success, a negative error code otherwise + */ +int fl2000_ddc_read_block(struct i2c_adapter *adapter, u8 *buf, unsigned int block, size_t len) +{ + struct usb_device *usb_dev = adapter->algo_data; + unsigned int start = block * EDID_LENGTH; + int ret = 0; + + if (block > 1 || len > EDID_LENGTH) + return -EOPNOTSUPP; + + /* One operation of the engine is a sequence of register accesses: keep others out */ + i2c_lock_bus(adapter, I2C_LOCK_SEGMENT); + for (unsigned int i = 0; i < len; i += 4) { + u32 data; + + ret = fl2000_i2c_dword(usb_dev, true, FL2000_DDC_ADDR, start + i, &data); + if (ret) + break; + + put_unaligned_le32(data, buf + i); + } + i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT); + + return ret; +} + +static u32 fl2000_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_NOSTART; +} + +static const struct i2c_algorithm fl2000_i2c_algorithm = { + .xfer = fl2000_i2c_xfer, + .functionality = fl2000_i2c_func, +}; + +static const struct i2c_adapter_quirks fl2000_i2c_quirks = { + /* Combined transfers only: an address write, then data, on the same address */ + .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR, + .max_num_msgs = I2C_CMESSAGES_NUM, + .max_write_len = 2 * I2C_REG_DATA_SIZE, + .max_read_len = I2C_REG_DATA_SIZE, + .max_comb_1st_msg_len = I2C_REG_ADDR_SIZE, + .max_comb_2nd_msg_len = I2C_REG_DATA_SIZE, +}; + +struct i2c_adapter *fl2000_i2c_init(struct usb_device *usb_dev) +{ + int ret; + struct i2c_adapter *adapter; + u8 usb_path[32]; + + /* Adapter must be allocated before anything else */ + adapter = devm_kzalloc(&usb_dev->dev, sizeof(*adapter), GFP_KERNEL); + if (!adapter) + return ERR_PTR(-ENOMEM); + + adapter->owner = THIS_MODULE; + adapter->algo = &fl2000_i2c_algorithm; + adapter->quirks = &fl2000_i2c_quirks; + adapter->algo_data = usb_dev; + adapter->dev.parent = &usb_dev->dev; + strscpy(adapter->name, "FL2000 bridge I2C bus", sizeof(adapter->name)); + + ret = devm_i2c_add_adapter(&usb_dev->dev, adapter); + if (ret) + return ERR_PTR(ret); + + usb_make_path(usb_dev, usb_path, sizeof(usb_path)); + dev_dbg(&usb_dev->dev, "Created FL2000 bridge I2C bus %d at interface %s\n", + i2c_adapter_id(adapter), usb_path); + + return adapter; +} diff --git a/drivers/gpu/drm/fl2000/fl2000_registers.c b/drivers/gpu/drm/fl2000/fl2000_registers.c new file mode 100644 index 000000000..231814471 --- /dev/null +++ b/drivers/gpu/drm/fl2000/fl2000_registers.c @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2017, Fresco Logic, Incorporated. + * (C) Copyright 2018-2019, Artem Mygaiev + */ + +#include +#include + +#include "fl2000.h" + +#define CONTROL_MSG_READ 64 +#define CONTROL_MSG_WRITE 65 + +#define FL2000_HW_RST_MDELAY 10 + +static bool fl2000_reg_precious(struct device *dev, unsigned int reg) +{ + return FL2000_REG_PRECIOUS(reg); +} + +static bool fl2000_reg_volatile(struct device *dev, unsigned int reg) +{ + return FL2000_REG_VOLATILE(reg); +} + +/* Protected by internal regmap mutex */ +static int fl2000_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + struct usb_device *usb_dev = context; + __le32 data; + int ret; + + ret = usb_control_msg_recv(usb_dev, 0, CONTROL_MSG_READ, USB_DIR_IN | USB_TYPE_VENDOR, 0, + reg, &data, sizeof(data), USB_CTRL_GET_TIMEOUT, GFP_KERNEL); + if (ret) + return ret; + + *val = le32_to_cpu(data); + + return 0; +} + +/* Protected by internal regmap mutex */ +static int fl2000_reg_write(void *context, unsigned int reg, unsigned int val) +{ + struct usb_device *usb_dev = context; + __le32 data = cpu_to_le32(val); + + return usb_control_msg_send(usb_dev, 0, CONTROL_MSG_WRITE, USB_DIR_OUT | USB_TYPE_VENDOR, 0, + reg, &data, sizeof(data), USB_CTRL_SET_TIMEOUT, GFP_KERNEL); +} + +/* + * We do not use default values as per documentation because: + * a) somehow they differ from real HW + * b) on SW reset not all of them are cleared + */ +static const struct regmap_config fl2000_regmap_config = { + .val_bits = 32, + .reg_bits = 16, + .reg_stride = 4, + .max_register = 0xFFFF, + + .cache_type = REGCACHE_MAPLE, + + .precious_reg = fl2000_reg_precious, + .volatile_reg = fl2000_reg_volatile, + + .reg_format_endian = REGMAP_ENDIAN_BIG, + .val_format_endian = REGMAP_ENDIAN_BIG, + + .reg_read = fl2000_reg_read, + .reg_write = fl2000_reg_write, + + .use_single_read = true, + .use_single_write = true, +}; + +int fl2000_set_pll(struct usb_device *usb_dev, struct fl2000_pll *pll) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + u32 val; + + val = FIELD_PREP(FL2000_VGA_PLL_PRESCALER, pll->prescaler) | + FIELD_PREP(FL2000_VGA_PLL_MULTIPLIER, pll->multiplier) | + FIELD_PREP(FL2000_VGA_PLL_DIVISOR, pll->divisor) | + FIELD_PREP(FL2000_VGA_PLL_FUNCTION, pll->function); + regmap_write(regmap, FL2000_VGA_PLL_REG, val); + + val = FL2000_VGA_CTRL_ACLK_FORCE_PLL_UP; + regmap_write_bits(regmap, FL2000_VGA_CTRL_REG_ACLK, val, val); + + return 0; +} + +/* + * Make the chip believe a monitor is connected whatever its own sense says. The HDMI path has + * always run with this set, so it stays set while HDMI is driven. It must be clear while only VGA + * is driven: it hides the cable being unplugged, and with it clear the chip powers its DAC and PLL + * by itself whenever it senses a monitor. + */ +int fl2000_force_connect(struct usb_device *usb_dev, bool force) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + + return regmap_write_bits(regmap, FL2000_VGA_CTRL_REG_ACLK, + FL2000_VGA_CTRL_ACLK_FORCE_VGA_CONNECT, + force ? FL2000_VGA_CTRL_ACLK_FORCE_VGA_CONNECT : 0); +} + +int fl2000_set_timings(struct usb_device *usb_dev, struct fl2000_timings *timings) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + + regmap_write(regmap, FL2000_VGA_HSYNC_REG1, + FIELD_PREP(FL2000_VGA_HSYNC1_HACTIVE, timings->hactive) | + FIELD_PREP(FL2000_VGA_HSYNC1_HTOTAL, timings->htotal)); + + regmap_write(regmap, FL2000_VGA_HSYNC_REG2, + FIELD_PREP(FL2000_VGA_HSYNC2_HSYNC_WIDTH, timings->hsync_width) | + FIELD_PREP(FL2000_VGA_HSYNC2_HSTART, timings->hstart)); + + regmap_write(regmap, FL2000_VGA_VSYNC_REG1, + FIELD_PREP(FL2000_VGA_VSYNC1_VACTIVE, timings->vactive) | + FIELD_PREP(FL2000_VGA_VSYNC1_VTOTAL, timings->vtotal)); + + regmap_write(regmap, FL2000_VGA_VSYNC_REG2, + FIELD_PREP(FL2000_VGA_VSYNC2_VSYNC_WIDTH, timings->vsync_width) | + FIELD_PREP(FL2000_VGA_VSYNC2_VSTART, timings->vstart) | + FIELD_PREP(FL2000_VGA_VSYNC2_START_LATENCY, timings->vstart)); + + return 0; +} + +int fl2000_set_pixfmt(struct usb_device *usb_dev, u32 bytes_pix) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + u32 mask, val; + + mask = FL2000_VGA_CTRL_PXCLK_DAC_OUTPUT_EN | FL2000_VGA_CTRL_PXCLK_DROP_CNT | + FL2000_VGA_CTRL_PXCLK_VGA565_MODE | FL2000_VGA_CTRL_PXCLK_VGA332_MODE | + FL2000_VGA_CTRL_PXCLK_VGA555_MODE | FL2000_VGA_CTRL_PXCLK_VGA_COMPRESS | + FL2000_VGA_CTRL_PXCLK_CLEAR_WATERMARK; + val = FL2000_VGA_CTRL_PXCLK_DAC_OUTPUT_EN | FL2000_VGA_CTRL_PXCLK_CLEAR_WATERMARK; + if (bytes_pix == 2) + val |= FL2000_VGA_CTRL_PXCLK_VGA565_MODE; + regmap_write_bits(regmap, FL2000_VGA_CTRL_REG_PXCLK, mask, val); + + return 0; +} + +int fl2000_set_transfers(struct usb_device *usb_dev) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + u32 mask; + + mask = FL2000_VGA_CTRL_ACLK_USE_PKT_PENDING | FL2000_VGA_CTRL_ACLK_USE_ZERO_TD | + FL2000_VGA_CTRL_ACLK_USE_ZERO_PKT_LEN; + regmap_write_bits(regmap, FL2000_VGA_CTRL_REG_ACLK, mask, + FL2000_VGA_CTRL_ACLK_USE_ZERO_PKT_LEN); + + regmap_write_bits(regmap, FL2000_VGA_ISOCH_REG, FL2000_VGA_ISOCH_MFRAME_CNT, 0); + + return 0; +} + +int fl2000_reset(struct usb_device *usb_dev) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + + regmap_write_bits(regmap, FL2000_RST_CTRL_REG, FL2000_RST_CTRL_SW_RESET, + FL2000_RST_CTRL_SW_RESET); + + msleep(FL2000_HW_RST_MDELAY); + + return 0; +} + +int fl2000_afe_magic(struct usb_device *usb_dev) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + + regmap_write_bits(regmap, FL2000_USB_LPM_REG, FL2000_USB_LPM_MAGIC, FL2000_USB_LPM_MAGIC); + + return 0; +} + +int fl2000_usb_magic(struct usb_device *usb_dev) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + u32 val; + + val = FL2000_VGA_I2C_SC_MONITOR_DETECT | FL2000_VGA_I2C_SC_EDID_DETECT; + regmap_write_bits(regmap, FL2000_VGA_I2C_SC_REG, val, val); + + regmap_write_bits(regmap, FL2000_VGA_CTRL_REG_3, FL2000_VGA_CTRL3_WAKEUP_CLR_EN, 0); + + val = FL2000_USB_LPM_U1_REJECT | FL2000_USB_LPM_U2_REJECT; + regmap_write_bits(regmap, FL2000_USB_LPM_REG, val, val); + + regmap_write_bits(regmap, FL2000_USB_CTRL_REG, FL2000_USB_CTRL_WAKE_NRDY, 0); + + return 0; +} + +int fl2000_enable_interrupts(struct usb_device *usb_dev) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + u32 mask, val; + + val = FL2000_VGA_CTRL_ACLK_VGA_ERR_INT_EN | FL2000_VGA_CTRL_ACLK_LBUF_ERR_INT_EN | + FL2000_VGA_CTRL_ACLK_EDID_MON_INT_EN; + mask = val | FL2000_VGA_CTRL_ACLK_FEEDBACK_INT_EN; + regmap_write_bits(regmap, FL2000_VGA_CTRL_REG_ACLK, mask, val); + + regmap_write_bits(regmap, FL2000_VGA_CTRL2_REG_ACLK, FL2000_VGA_CTRL2_ACLK_HDMI_INT_EN, + FL2000_VGA_CTRL2_ACLK_HDMI_INT_EN); + + return 0; +} + +/* + * Read the status register. Its event bits clear on read, so whoever reads it owns the events it + * returns: callers must not drop them. + */ +int fl2000_read_status(struct usb_device *usb_dev, u32 *status) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + unsigned int val; + u32 mask; + int ret; + + ret = regmap_read(regmap, FL2000_VGA_STATUS_REG, &val); + if (ret) + return ret; + + /* LBUF issues are recoverable */ + mask = val & (FL2000_VGA_STATUS_LBUF_OVERFLOW | FL2000_VGA_STATUS_LBUF_UNDERFLOW); + if (mask) + regmap_write_bits(regmap, FL2000_VGA_STATUS_REG, mask, val); + + /* lbuf_halt and vga_error are not handled: no recovery sequence is known */ + + *status = val; + + return 0; +} + +int fl2000_i2c_dword(struct usb_device *usb_dev, bool read, u16 addr, u8 offset, u32 *data) +{ + int ret; + unsigned int val; + u32 mask; + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + + if (!read) { + ret = regmap_write(regmap, FL2000_VGA_I2C_WR_REG, *data); + if (ret) + return -EIO; + } + + /* + * The detection bits always read back as 0, so they need to be set again on every write. + * It is not clear whether the monitor detection circuit is needed at all for the HDMI use + * case. + */ + mask = FL2000_VGA_I2C_SC_MONITOR_DETECT | FL2000_VGA_I2C_SC_EDID_DETECT | + FL2000_VGA_I2C_SC_STATUS | FL2000_VGA_I2C_SC_ADDR | FL2000_VGA_I2C_SC_CMD | + FL2000_VGA_I2C_SC_OFFSET | FL2000_VGA_I2C_SC_DONE; + val = FL2000_VGA_I2C_SC_MONITOR_DETECT | FL2000_VGA_I2C_SC_EDID_DETECT | + FIELD_PREP(FL2000_VGA_I2C_SC_ADDR, addr) | + FIELD_PREP(FL2000_VGA_I2C_SC_CMD, read) | + FIELD_PREP(FL2000_VGA_I2C_SC_OFFSET, offset); + + ret = regmap_write_bits(regmap, FL2000_VGA_I2C_SC_REG, mask, val); + if (ret) + return -EIO; + + ret = regmap_read_poll_timeout(regmap, FL2000_VGA_I2C_SC_REG, val, + val & FL2000_VGA_I2C_SC_DONE, I2C_RDWR_INTERVAL, + I2C_RDWR_TIMEOUT); + /* + * This shouldn't normally happen: there's internal 256ms HW timeout on I2C operations and + * USB must be always available so no I/O errors. But if it happens we are probably facing + * an irreversible HW issue. + */ + if (ret || FIELD_GET(FL2000_VGA_I2C_SC_STATUS, val)) + return -EIO; + + if (read) { + ret = regmap_read(regmap, FL2000_VGA_I2C_RD_REG, data); + if (ret) + return -EIO; + } + + return 0; +} + +/* + * The chip may have lost power (system sleep): forget the cached registers, so that the + * read-modify-write updates that follow read the chip instead of skipping writes it still needs. + */ +void fl2000_regmap_drop_cache(struct usb_device *usb_dev) +{ + struct regmap *regmap = dev_get_regmap(&usb_dev->dev, NULL); + + regcache_drop_region(regmap, 0, fl2000_regmap_config.max_register); +} + +struct regmap *fl2000_regmap_init(struct usb_device *usb_dev) +{ + struct regmap *regmap; + + regmap = devm_regmap_init(&usb_dev->dev, NULL, usb_dev, &fl2000_regmap_config); + if (IS_ERR(regmap)) + dev_err(&usb_dev->dev, "Registers map failed (%pe)\n", regmap); + + return regmap; +} diff --git a/drivers/gpu/drm/fl2000/fl2000_registers.h b/drivers/gpu/drm/fl2000/fl2000_registers.h new file mode 100644 index 000000000..7ca977f1d --- /dev/null +++ b/drivers/gpu/drm/fl2000/fl2000_registers.h @@ -0,0 +1,272 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Based on the official registers description from Fresco Logic + * + * (C) Copyright 2019, Artem Mygaiev + */ + +#ifndef FL2000_REGISTERS_H +#define FL2000_REGISTERS_H + +#include +#include + +/* #### USB Control Registers Bank #### */ +/* Some unknown & undocumented FL2000 USB settings */ + +#define FL2000_USB_CONTROL_OFFSET 0x0000 + +#define FL2000_USB_LPM_REG (FL2000_USB_CONTROL_OFFSET + 0x70) +#define FL2000_USB_LPM_MAGIC BIT(13) +#define FL2000_USB_LPM_U2_REJECT BIT(19) +#define FL2000_USB_LPM_U1_REJECT BIT(20) + +#define FL2000_USB_CTRL_REG (FL2000_USB_CONTROL_OFFSET + 0x78) +#define FL2000_USB_CTRL_WAKE_NRDY BIT(17) + +/* #### VGA Control Registers Bank #### */ +/* Taken from the 'FL200DX Memory Mapped Address Space Registers' spec */ + +#define FL2000_VGA_CONTROL_OFFSET 0x8000 + +#define FL2000_VGA_STATUS_REG (FL2000_VGA_CONTROL_OFFSET + 0x00) +#define FL2000_VGA_STATUS_VGA_STATUS BIT(0) +#define FL2000_VGA_STATUS_VGA_ERROR BIT(1) /* read self clear */ +#define FL2000_VGA_STATUS_LBUF_HALT BIT(2) +#define FL2000_VGA_STATUS_ISO_ACK BIT(3) /* read self clear */ +#define FL2000_VGA_STATUS_TD_DROP BIT(4) /* read self clear */ +#define FL2000_VGA_STATUS_IRQ_PENDING BIT(5) /* read self clear */ +#define FL2000_VGA_STATUS_PLL_STATUS BIT(6) +#define FL2000_VGA_STATUS_DAC_STATUS BIT(7) +#define FL2000_VGA_STATUS_LBUF_OVERFLOW BIT(8) +#define FL2000_VGA_STATUS_LBUF_UNDERFLOW BIT(9) +#define FL2000_VGA_STATUS_FRAME_CNT GENMASK(25, 10) +#define FL2000_VGA_STATUS_HDMI_EVENT BIT(26) /* read self clear */ +#define FL2000_VGA_STATUS_HDMI_STATUS BIT(27) +#define FL2000_VGA_STATUS_EDID_STATUS BIT(28) +#define FL2000_VGA_STATUS_MONITOR_STATUS BIT(29) +#define FL2000_VGA_STATUS_MONITOR_EVENT BIT(30) /* read self clear */ +#define FL2000_VGA_STATUS_EDID_EVENT BIT(31) /* read self clear */ + +#define FL2000_VGA_CTRL_REG_PXCLK (FL2000_VGA_CONTROL_OFFSET + 0x04) +#define FL2000_VGA_CTRL_PXCLK_CLEAR_WATERMARK BIT(0) +#define FL2000_VGA_CTRL_PXCLK_FRAME_SYNC BIT(1) +#define FL2000_VGA_CTRL_PXCLK_HSYNC_POLARITY BIT(2) +#define FL2000_VGA_CTRL_PXCLK_VSYNC_POLARITY BIT(3) +#define FL2000_VGA_CTRL_PXCLK_DE_POLARITY BIT(4) +#define FL2000_VGA_CTRL_PXCLK_MIRROR_MODE BIT(5) +#define FL2000_VGA_CTRL_PXCLK_VGA565_MODE BIT(6) +#define FL2000_VGA_CTRL_PXCLK_DAC_OUTPUT_EN BIT(7) +#define FL2000_VGA_CTRL_PXCLK_VGA_TIMING_EN BIT(8) +#define FL2000_VGA_CTRL_PXCLK_USE_NEW_PKT_RETRY BIT(9) +#define FL2000_VGA_CTRL_PXCLK_REF_SELECT BIT(10) +#define FL2000_VGA_CTRL_PXCLK_DAC_PX_CLK_INVERT BIT(11) +#define FL2000_VGA_CTRL_PXCLK_CLEAR_LBUF_STATUS BIT(12) +#define FL2000_VGA_CTRL_PXCLK_DROP_CNT BIT(13) +#define FL2000_VGA_CTRL_PXCLK_USE_VDI_ITP_CNT BIT(14) +#define FL2000_VGA_CTRL_PXCLK_VGA_COMPRESS BIT(24) +#define FL2000_VGA_CTRL_PXCLK_VGA332_MODE BIT(25) +#define FL2000_VGA_CTRL_PXCLK_VGA_COLOR_PALETTE_EN BIT(26) +#define FL2000_VGA_CTRL_PXCLK_VGA_FIRST_BT_ENC_EN BIT(27) +#define FL2000_VGA_CTRL_PXCLK_CLEAR_125US_CNT BIT(28) +#define FL2000_VGA_CTRL_PXCLK_DISABLE_HALT BIT(29) +#define FL2000_VGA_CTRL_PXCLK_FORCE_DE_EN BIT(30) +#define FL2000_VGA_CTRL_PXCLK_VGA555_MODE BIT(31) + +#define FL2000_VGA_HSYNC_REG1 (FL2000_VGA_CONTROL_OFFSET + 0x08) +#define FL2000_VGA_HSYNC1_HTOTAL GENMASK(11, 0) +#define FL2000_VGA_HSYNC1_HACTIVE GENMASK(27, 16) + +#define FL2000_VGA_HSYNC_REG2 (FL2000_VGA_CONTROL_OFFSET + 0x0C) +#define FL2000_VGA_HSYNC2_HSTART GENMASK(11, 0) +#define FL2000_VGA_HSYNC2_HSYNC_WIDTH GENMASK(23, 16) + +#define FL2000_VGA_VSYNC_REG1 (FL2000_VGA_CONTROL_OFFSET + 0x10) +#define FL2000_VGA_VSYNC1_VTOTAL GENMASK(11, 0) +#define FL2000_VGA_VSYNC1_VACTIVE GENMASK(27, 16) + +#define FL2000_VGA_VSYNC_REG2 (FL2000_VGA_CONTROL_OFFSET + 0x14) +#define FL2000_VGA_VSYNC2_VSTART GENMASK(11, 0) +#define FL2000_VGA_VSYNC2_VSYNC_WIDTH GENMASK(18, 16) +#define FL2000_VGA_VSYNC2_START_LATENCY GENMASK(29, 20) +#define FL2000_VGA_VSYNC2_BUF_ERROR_EN BIT(31) + +#define FL2000_VGA_TEST_REG (FL2000_VGA_CONTROL_OFFSET + 0x18) +#define FL2000_VGA_ISOCH_REG (FL2000_VGA_CONTROL_OFFSET + 0x1C) +#define FL2000_VGA_ISOCH_START_MFRAME_CNT GENMASK(13, 0) +#define FL2000_VGA_ISOCH_USE_MFRAME_MATCH BIT(14) +#define FL2000_VGA_ISOCH_USE_ZERO_LEN_FRAME BIT(15) +#define FL2000_VGA_ISOCH_MFRAME_CNT GENMASK(29, 16) +#define FL2000_VGA_ISOCH_MFRAME_CNT_UPDATE BIT(30) + +#define FL2000_VGA_I2C_SC_REG (FL2000_VGA_CONTROL_OFFSET + 0x20) +#define FL2000_VGA_I2C_SC_ADDR GENMASK(6, 0) +#define FL2000_VGA_I2C_SC_CMD BIT(7) +#define FL2000_VGA_I2C_SC_OFFSET GENMASK(15, 8) +#define FL2000_VGA_I2C_SC_VGA_STATUS GENMASK(23, 16) +#define FL2000_VGA_I2C_SC_STATUS GENMASK(27, 24) +#define FL2000_VGA_I2C_SC_MONITOR_DETECT BIT(28) +#define FL2000_VGA_I2C_SC_READY BIT(29) +#define FL2000_VGA_I2C_SC_EDID_DETECT BIT(30) +#define FL2000_VGA_I2C_SC_DONE BIT(31) + +#define FL2000_VGA_I2C_RD_REG (FL2000_VGA_CONTROL_OFFSET + 0x24) +#define FL2000_VGA_I2C_WR_REG (FL2000_VGA_CONTROL_OFFSET + 0x28) + +#define FL2000_VGA_PLL_REG (FL2000_VGA_CONTROL_OFFSET + 0x2C) +#define FL2000_VGA_PLL_DIVISOR GENMASK(7, 0) +#define FL2000_VGA_PLL_PRESCALER GENMASK(9, 8) +#define FL2000_VGA_PLL_FUNCTION GENMASK(14, 13) +#define FL2000_VGA_PLL_MULTIPLIER GENMASK(23, 16) +#define FL2000_VGA_PLL_TEST_IO BIT(24) +#define FL2000_VGA_PLL_CFG_DAC_PWRDOWN BIT(25) +#define FL2000_VGA_PLL_FORCE_DAC_PWRUP BIT(26) + +#define FL2000_VGA_LBUF_REG (FL2000_VGA_CONTROL_OFFSET + 0x30) +#define FL2000_VGA_LBUF_WATERMARK_ASSERT_RDY GENMASK(14, 0) + +#define FL2000_VGA_HI_MARK (FL2000_VGA_CONTROL_OFFSET + 0x34) +#define FL2000_VGA_HI_MARK_HIGH_WATERMARK GENMASK(16, 0) + +#define FL2000_VGA_LO_MARK (FL2000_VGA_CONTROL_OFFSET + 0x38) +#define FL2000_VGA_LO_MARK_LOW_WATERMARK GENMASK(16, 0) + +#define FL2000_VGA_CTRL_REG_ACLK (FL2000_VGA_CONTROL_OFFSET + 0x3C) +#define FL2000_VGA_CTRL_ACLK_CFG_TIMING_RESET_N BIT(0) +#define FL2000_VGA_CTRL_ACLK_PLH_BLOCK_EN BIT(1) +#define FL2000_VGA_CTRL_ACLK_EDID_MON_INT_EN BIT(2) +#define FL2000_VGA_CTRL_ACLK_EXT_MON_INT_EN BIT(3) +#define FL2000_VGA_CTRL_ACLK_VGA_STATUS_SELF_CLEAR BIT(4) +#define FL2000_VGA_CTRL_ACLK_PLL_LOCK_TIME GENMASK(9, 5) +#define FL2000_VGA_CTRL_ACLK_PLL_FAST_TIMEOUT_EN BIT(10) +#define FL2000_VGA_CTRL_ACLK_PPE_BLOCK_EM BIT(11) +#define FL2000_VGA_CTRL_ACLK_PLL_TIMER_EN BIT(12) +#define FL2000_VGA_CTRL_ACLK_FEEDBACK_INT_EN BIT(13) +#define FL2000_VGA_CTRL_ACLK_CLR_125US_COUNTER BIT(14) +#define FL2000_VGA_CTRL_ACLK_CCS_PD_DIS BIT(15) +#define FL2000_VGA_CTRL_ACLK_STANDBY_EN BIT(16) +#define FL2000_VGA_CTRL_ACLK_FORCE_LOOPBACK BIT(17) +#define FL2000_VGA_CTRL_ACLK_LBUF_DROP_FRAME_EN BIT(18) +#define FL2000_VGA_CTRL_ACLK_LBUF_VDE_RST_EN BIT(19) +#define FL2000_VGA_CTRL_ACLK_LBUF_SW_RST BIT(20) +#define FL2000_VGA_CTRL_ACLK_LBUF_ERR_INT_EN BIT(21) +#define FL2000_VGA_CTRL_ACLK_BIAC_EN BIT(22) +#define FL2000_VGA_CTRL_ACLK_PXCLK_IN_EN BIT(23) +#define FL2000_VGA_CTRL_ACLK_VGA_ERR_INT_EN BIT(24) +#define FL2000_VGA_CTRL_ACLK_FORCE_VGA_CONNECT BIT(25) +#define FL2000_VGA_CTRL_ACLK_FORCE_PLL_UP BIT(26) +#define FL2000_VGA_CTRL_ACLK_USE_ZERO_TD BIT(27) +#define FL2000_VGA_CTRL_ACLK_USE_ZERO_PKT_LEN BIT(28) +#define FL2000_VGA_CTRL_ACLK_USE_PKT_PENDING BIT(29) +#define FL2000_VGA_CTRL_ACLK_PLL_DAC_PD_USBP3_EN BIT(30) +#define FL2000_VGA_CTRL_ACLK_PLL_DAC_PD_NOVGA_EN BIT(31) + +#define FL2000_VGA_PXCLK_CNT_REG (FL2000_VGA_CONTROL_OFFSET + 0x40) +#define FL2000_VGA_PXCLK_CNT_PIX_CLOCK_COUNT GENMASK(27, 0) + +#define FL2000_VGA_VCNT_REG (FL2000_VGA_CONTROL_OFFSET + 0x44) +#define FL2000_VGA_VCNT_MAX_ACLK_COUNT GENMASK(14, 0) +#define FL2000_VGA_VCNT_MAX_ACLK_COUNT_HIT BIT(15) +#define FL2000_VGA_VCNT_MAX_LBUF_ACCUMULATE GENMASK(31, 16) + +#define FL2000_RST_CTRL_REG (FL2000_VGA_CONTROL_OFFSET + 0x48) +#define FL2000_RST_CTRL_DIS_HOT_RST2_PORT BIT(0) +#define FL2000_RST_CTRL_DIS_WARM_RST2_PORT BIT(1) +#define FL2000_RST_CTRL_DIS_HOT_RESET_PIPE BIT(2) +#define FL2000_RST_CTRL_DIS_WARM_RESET_PIPE BIT(3) +#define FL2000_RST_CTRL_DIS_HOT_RESET_PIX BIT(4) +#define FL2000_RST_CTRL_DIS_WARM_RESET_PIX BIT(5) +#define FL2000_RST_CTRL_DIS_USB2_RESET_PIX BIT(6) +#define FL2000_RST_CTRL_DIS_PLL_RESET_PIX BIT(7) +#define FL2000_RST_CTRL_DIS_SW_RESET_PIX BIT(8) +#define FL2000_RST_CTRL_DIS_USB2_RESET_BUF BIT(9) +#define FL2000_RST_CTRL_DIS_SW_RESET_BUF BIT(10) +#define FL2000_RST_CTRL_DIS_LBUF_RESET_PIX BIT(11) +#define FL2000_RST_CTRL_DIS_HOT_RESET_PORT BIT(12) +#define FL2000_RST_CTRL_DIS_WARM_RESET_PORT BIT(13) +#define FL2000_RST_CTRL_SET_SLOW_CLK_PREDFT BIT(14) +#define FL2000_RST_CTRL_SW_RESET BIT(15) +#define FL2000_RST_CTRL_FRAME_FIRST_ITP_WL GENMASK(31, 16) + +#define FL2000_BIAC_CTRL1_REG (FL2000_VGA_CONTROL_OFFSET + 0x4C) +#define FL2000_BIAC_CTRL1_CTRL_LO8 GENMASK(7, 0) +#define FL2000_BIAC_CTRL1_FRAME_MULT GENMASK(15, 8) +#define FL2000_BIAC_CTRL1_125US_MULT GENMASK(31, 16) + +#define FL2000_BIAC_CTRL2_REG (FL2000_VGA_CONTROL_OFFSET + 0x50) +#define FL2000_BIAC_CTRL2_CTRL_HI16 GENMASK(15, 0) + +#define FL2000_BIAC_STATUS_REG (FL2000_VGA_CONTROL_OFFSET + 0x54) +#define FL2000_BIAC_STATUS_CURRENT_STATUS GENMASK(15, 0) +#define FL2000_BIAC_STATUS_CURRENT_VALUE GENMASK(31, 16) + +/* undefined (FL2000_VGA_CONTROL_OFFSET + 0x58) */ + +#define FL2000_VGA_PLT_REG_PXCLK (FL2000_VGA_CONTROL_OFFSET + 0x5C) +#define FL2000_VGA_PLT_PXCLK_PALETTE_RAM_WR_DATA GENMASK(23, 0) + +#define FL2000_VGA_PLT_RADDR_REG_PXCLK (FL2000_VGA_CONTROL_OFFSET + 0x60) +#define FL2000_VGA_PLT_RADDR_PALETTE_RAM_RD_ADDR GENMASK(7, 0) +#define FL2000_VGA_PLT_RADDR_LAST_FRAME_LBUF_WATERMARK GENMASK(23, 8) + +#define FL2000_VGA_CTRL2_REG_ACLK (FL2000_VGA_CONTROL_OFFSET + 0x64) +#define FL2000_VGA_CTRL2_ACLK_PLL_POWERDOWN_DETECT_EN BIT(0) +#define FL2000_VGA_CTRL2_ACLK_MSTOR_BLKSIZE_PTR_WIDTH GENMASK(3, 1) +#define FL2000_VGA_CTRL2_ACLK_MSTOR_BLK_COUNT GENMASK(15, 4) +#define FL2000_VGA_CTRL2_ACLK_SPI_WR_EN BIT(16) +#define FL2000_VGA_CTRL2_ACLK_DETECT_PINS_DEBOUNCE_EN BIT(17) +#define FL2000_VGA_CTRL2_ACLK_HDMI_INT_EN BIT(18) +#define FL2000_VGA_CTRL2_ACLK_HDMI_INT_ACTIVE_HIGH BIT(19) +#define FL2000_VGA_CTRL2_ACLK_SPI_EN BIT(20) +#define FL2000_VGA_CTRL2_ACLK_SW_PROD_REV GENMASK(30, 23) + +/* undefined (FL2000_VGA_CONTROL_OFFSET + 0x68) */ +/* undefined (FL2000_VGA_CONTROL_OFFSET + 0x6C) */ + +#define FL2000_TEST_CNTL_REG1 (FL2000_VGA_CONTROL_OFFSET + 0x70) +#define FL2000_TEST_CNTL_REG2 (FL2000_VGA_CONTROL_OFFSET + 0x74) +#define FL2000_TEST_CNTL_REG3 (FL2000_VGA_CONTROL_OFFSET + 0x78) +#define FL2000_TEST_STAT1 (FL2000_VGA_CONTROL_OFFSET + 0x7C) +#define FL2000_TEST_STAT2 (FL2000_VGA_CONTROL_OFFSET + 0x80) +#define FL2000_TEST_STAT3 (FL2000_VGA_CONTROL_OFFSET + 0x84) + +#define FL2000_VGA_CTRL_REG_3 (FL2000_VGA_CONTROL_OFFSET + 0x88) +#define FL2000_VGA_CTRL3_WAKEUP_CLR_EN BIT(10) + +/* undefined (FL2000_VGA_CONTROL_OFFSET + 0x8C) */ + +/* + * List of registers that shall not be read automatically (e.g. for cache update) due to presence + * of self-clear bits + */ +static inline bool FL2000_REG_PRECIOUS(u32 reg) +{ + return reg == FL2000_VGA_STATUS_REG; +} + +/* List of volatile registers that shall not be cached */ +static inline bool FL2000_REG_VOLATILE(u32 reg) +{ + switch (reg) { + case FL2000_VGA_STATUS_REG: + case FL2000_VGA_CTRL_REG_PXCLK: + case FL2000_VGA_ISOCH_REG: + case FL2000_VGA_I2C_SC_REG: + case FL2000_VGA_I2C_RD_REG: + case FL2000_VGA_PXCLK_CNT_REG: + case FL2000_VGA_VCNT_REG: + case FL2000_RST_CTRL_REG: + case FL2000_BIAC_STATUS_REG: + case FL2000_VGA_PLT_RADDR_REG_PXCLK: + case FL2000_TEST_CNTL_REG1: + case FL2000_TEST_CNTL_REG2: + case FL2000_TEST_STAT1: + case FL2000_TEST_STAT2: + case FL2000_TEST_STAT3: + return true; + default: + return false; + } +} + +#endif /* FL2000_REGISTERS_H */ -- 2.56.0