From: Marek Szyprowski <m.szyprowski@samsung.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
iommu@lists.linux.dev
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Rob Herring <robh@kernel.org>,
Saravana Kannan <saravanak@kernel.org>,
Robin Murphy <robin.murphy@arm.com>
Subject: [PATCH] of: reserved_mem: Drop node_fixup, CMA can handle it internally again
Date: Thu, 5 Nov 2026 22:54:11 +0100 [thread overview]
Message-ID: <20261105215413.1439745-1-m.szyprowski@samsung.com> (raw)
In-Reply-To: <CGME20261105215426eucas1p1fb2de3113bd185a84e1d0925e14fc4fc@eucas1p1.samsung.com>
The separate fixup step was needed because node initialization used to
run too late, after paging_init(). Since commit aa05faf81583 ("of:
reserved_mem: allocate and map the reserved_mem array early") node_init
runs early enough again, so dma_contiguous_early_fixup() can be called
directly from rmem_cma_setup() once the CMA region has been successfully
initialized, as it was before commit 2c223f7239f37 ("of: reserved_mem:
Restructure call site for dma_contiguous_early_fixup()").
Drop the now unused node_fixup callback and its helper. This also fixes
the premature call to fixup when region fails to initialize.
Closes: https://sashiko.dev/#/bug/linux-61818eaa-5dc1-4457-bd21-3a9be2ed4d6d
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/of/of_reserved_mem.c | 34 ---------------------------------
include/linux/of_reserved_mem.h | 2 --
kernel/dma/contiguous.c | 17 +++--------------
3 files changed, 3 insertions(+), 50 deletions(-)
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 0fd1683cba01..e7764f57438b 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -86,8 +86,6 @@ static void fdt_init_reserved_mem_node(unsigned long node, const char *uname,
phys_addr_t base, phys_addr_t size);
static int fdt_validate_reserved_mem_node(unsigned long node,
phys_addr_t *align);
-static int fdt_fixup_reserved_mem_node(unsigned long node,
- phys_addr_t base, phys_addr_t size);
static int __init early_init_dt_reserve_memory(phys_addr_t base,
phys_addr_t size, bool nomap)
@@ -139,7 +137,6 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
size = s;
if (size && early_init_dt_reserve_memory(base, size, nomap) == 0) {
- fdt_fixup_reserved_mem_node(node, base, size);
pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %lu MiB\n",
uname, &base, (unsigned long)(size / SZ_1M));
} else {
@@ -305,7 +302,6 @@ static int __init __reserved_mem_alloc_size(unsigned long node, const char *unam
return -ENOMEM;
}
- fdt_fixup_reserved_mem_node(node, base, size);
fdt_init_reserved_mem_node(node, uname, base, size);
return 0;
@@ -494,36 +490,6 @@ extern const struct of_device_id __reservedmem_of_table[];
static const struct of_device_id __rmem_of_table_sentinel
__used __section("__reservedmem_of_table_end");
-/**
- * fdt_fixup_reserved_mem_node() - call fixup function for a reserved memory node
- * @node: FDT node to fixup
- * @base: base address of the reserved memory region
- * @size: size of the reserved memory region
- *
- * This function iterates through the reserved memory drivers and calls
- * the node_fixup callback for the compatible entry matching the node.
- *
- * Return: 0 on success, -ENODEV if no compatible match found
- */
-static int __init fdt_fixup_reserved_mem_node(unsigned long node,
- phys_addr_t base, phys_addr_t size)
-{
- const struct of_device_id *i;
- int ret = -ENODEV;
-
- for (i = __reservedmem_of_table; ret == -ENODEV &&
- i < &__rmem_of_table_sentinel; i++) {
- const struct reserved_mem_ops *ops = i->data;
-
- if (!of_flat_dt_is_compatible(node, i->compatible))
- continue;
-
- if (ops->node_fixup)
- ret = ops->node_fixup(node, base, size);
- }
- return ret;
-}
-
/**
* fdt_validate_reserved_mem_node() - validate a reserved memory node
* @node: FDT node to validate
diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
index 49da515859f2..7a940d1815b6 100644
--- a/include/linux/of_reserved_mem.h
+++ b/include/linux/of_reserved_mem.h
@@ -19,8 +19,6 @@ struct reserved_mem {
struct reserved_mem_ops {
int (*node_validate)(unsigned long fdt_node, phys_addr_t *align);
- int (*node_fixup)(unsigned long fdt_node, phys_addr_t base,
- phys_addr_t size);
int (*node_init)(unsigned long fdt_node, struct reserved_mem *rmem);
int (*device_init)(struct reserved_mem *rmem,
struct device *dev);
diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c
index 90937dc7c627..9acb092ab7d6 100644
--- a/kernel/dma/contiguous.c
+++ b/kernel/dma/contiguous.c
@@ -529,19 +529,6 @@ static int __init rmem_cma_validate(unsigned long node, phys_addr_t *align)
return 0;
}
-static int __init rmem_cma_fixup(unsigned long node, phys_addr_t base,
- phys_addr_t size)
-{
- int ret = __rmem_cma_verify_node(node);
-
- if (ret)
- return ret;
-
- /* Architecture specific contiguous memory fixup. */
- dma_contiguous_early_fixup(base, size);
- return 0;
-}
-
static int __init rmem_cma_setup(unsigned long node, struct reserved_mem *rmem)
{
bool default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL);
@@ -563,6 +550,9 @@ static int __init rmem_cma_setup(unsigned long node, struct reserved_mem *rmem)
return ret;
}
+ /* Architecture specific contiguous memory fixup. */
+ dma_contiguous_early_fixup(rmem->base, rmem->size);
+
if (default_cma)
dma_contiguous_default_area = cma;
@@ -580,7 +570,6 @@ static int __init rmem_cma_setup(unsigned long node, struct reserved_mem *rmem)
static const struct reserved_mem_ops rmem_cma_ops = {
.node_validate = rmem_cma_validate,
- .node_fixup = rmem_cma_fixup,
.node_init = rmem_cma_setup,
.device_init = rmem_cma_device_init,
.device_release = rmem_cma_device_release,
--
2.43.0
parent reply other threads:[~2026-11-05 21:54 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <CGME20261105215426eucas1p1fb2de3113bd185a84e1d0925e14fc4fc@eucas1p1.samsung.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261105215413.1439745-1-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=iommu@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=saravanak@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®