From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=205.220.168.131 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1793956876; b=ZV47ec4yu1LfeDEO6ZxchnAqqPMCuwfeYYlgGgUQ13MtciHWKUPJJ1KY9P93I8JTwM8f WYeIlOctZD7a3zFdfpEkg/d9eiq06FXJUE/T625f/KQTzLtJMpo2op3inqjKhHqEbOTJF 3ahCWh4eM7X1DVmn9P6wvN5Luf8zKOaCLE+G/MoDvdZBeIaJz7/dc4I8sx1d5XxY7Ach9 ff4aXA/65bJ1XXlq78iBB6LSb0yZS9WuJmnt64uShO1VLNVFG6h2LdzQf9O2ElzraEjWi gFNmDnc+B/uZfcslfdU2/Ju65IW3WGAgt7jbkSWD4SA/IrYsliLqp/vg3L6QivGGV+A== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1793956876; h=DMARC-Filter:Received:DKIM-Signature:Received:Received: DKIM-Signature:X-Google-DKIM-Signature:X-Forwarded-Encrypted: X-Gm-Message-State:X-Gm-Gg:X-Received:X-Received:Received:From:Date: Subject:MIME-Version:Content-Type:Content-Transfer-Encoding: Message-Id:References:In-Reply-To:To:Cc:X-Mailer: X-Proofpoint-Spam-Info:X-Proofpoint-GUID: X-Proofpoint-Spam-Details-Enc:X-Proofpoint-ORIG-GUID: X-Authority-Analysis:X-Proofpoint-Virus-Version: X-Proofpoint-Spam-Details; bh=YcqFaFzb5BcQeJQBxyHIpDyUgxFseSvCMfSnsdJE/k8=; b=O1erXCnpIqcrdrv60ZCvp25hpJbhjrrDA3lkhcOe/3qRSjcFP0ZMA0kdGu5/sXaJDyIc A+pOLh3OOHJmFam7k23XMRUlBrIBR/UGFKSJRHf7/XNZLsL/MgNKhdWwuJVZcvFFTXu7j RFGR7S9+gXTCIMLskw24cibhiKCSeM+wRBwWYVpKTp0U7My7130BYiwECOrbPk9g4UhFw 3G+4155vshM1mCq/62Ex+lIVKjX1T23oBnCGMpJq2evXVc9JuXWt8Ujs16Ai/lW9AimN0 8O/eNre/FeAVXU9kKu+dQjlhAYq44vbpIoylnIb6Z+Y5GQPrkFAVOFfxjEkmnSyHjdw== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass header.from=oss.qualcomm.com; spf=pass smtp.mailfrom=oss.qualcomm.com; dkim=pass header.d=qualcomm.com header.i=@qualcomm.com header.a=rsa-sha256 header.s=qcppdkim1 header.b=S5jKQv5w; dkim=pass header.d=oss.qualcomm.com header.i=@oss.qualcomm.com header.a=rsa-sha256 header.s=google header.b="Eus8n/TD"; arc=none smtp.remote-ip=205.220.168.131 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DE512606A335 for ; Fri, 6 Nov 2026 09:21:14 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org DE512606A335 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.qualcomm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key, unprotected) header.d=qualcomm.com header.i=@qualcomm.com header.a=rsa-sha256 header.s=qcppdkim1 header.b=S5jKQv5w; dkim=pass (2048-bit key, unprotected) header.d=oss.qualcomm.com header.i=@oss.qualcomm.com header.a=rsa-sha256 header.s=google header.b=Eus8n/TD Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.11/8.18.1.11) with ESMTP id 6A67RBFc045292 for ; Fri, 6 Nov 2026 09:21:14 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=qualcomm.com; h= cc:content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=qcppdkim1; bh= YcqFaFzb5BcQeJQBxyHIpDyUgxFseSvCMfSnsdJE/k8=; b=S5jKQv5wjEI9RFu8 4Am1Xh6yYyokaaapKkQLe9kWP/BqJxXbtCAKJ83om9VGNF9pXmqEPys80GZnHwSR oBNR0OIWaUjuWslF4lpD8bHJGLO5YdGK6oncAbkE86HNb8IMWCb+q3dtAivJPMxk zsAtZScBFH2l6zJCzO8NcdKQxKja7UYHJI8frZcxIyIFj4dHxLCNxqQ4RIe35hXc luDWe7tdyaf6TsMNUjcTlXrpXOBXFe43op7GLoIiGxF0TqhRMmFfkJf6Ryc7hlWL 8JQzPzH1WCxRlhfm5S7hVU1OkvLXCKTDgsxhLshyBlAMzxOKY24DPkSzgcO2qqHR E0Zqng== Received: from mail-dy1-f200.google.com (mail-dy1-f200.google.com [74.125.82.200]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 4hs3p9t437-1 (version=TLSv1.3 cipher=TLS_AES_128_GCM_SHA256 bits=128 verify=NOT) for ; Fri, 06 Nov 2026 09:21:14 +0000 (GMT) Received: by mail-dy1-f200.google.com with SMTP id 5a478bee46e88-36cec75d8caso646152eec.0 for ; Fri, 06 Nov 2026 01:21:14 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=oss.qualcomm.com; s=google; t=1793956873; x=1794561673; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :content-type:mime-version:subject:date:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=YcqFaFzb5BcQeJQBxyHIpDyUgxFseSvCMfSnsdJE/k8=; b=Eus8n/TDvpEgPayLYKg4lwgCZlNQmx9xSJIarXS7PXx+sxa1/+3Tgz2qzh9eMpY39O rLNKYuph8v3Cq7xD+uX60WHm2WZ/mzp+uUdzEe5UqbPod+r2OHkqdP0a1liw9iM0qJ// rkmvAxjjvof7jys4DO0uYhvfwXcTdvaLAMy3hNu5KiCWxeEAeAjjgf79PRXGqlXDQrIe tGUZ0X6PGfcnWYCCKYZaHRL2rsby7hGLe2DqvXHWMqPAkvcZUS8vU+n02rw/GH4XjoCN Zn4WM3y9QTxEm+ecfAQAyBANz0RnqjebH6e0dUkL1Q5yUH/83JLVKdjjYjLCdcu4sba6 2k+Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1793956873; x=1794561673; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :content-type:mime-version:subject:date:from:x-gm-gg :x-gm-message-state:from:to:cc:subject:date:message-id:reply-to :content-type; bh=YcqFaFzb5BcQeJQBxyHIpDyUgxFseSvCMfSnsdJE/k8=; b=1pLiXfu2Ud2qfomXteiOWMxObD0Y/DRRtsKlwkYgiBI8DV05JqamEFAIp+oLIBg2I8 EDaYHf1HDi0KiMu74sEwy9KkJKcdDGT3Gt7dlYjVC3gzdUnYuKc8CNGFPObyxPp0eVva nKd9mNbyIxo8riQDCSA/XMbzurp7DUbS1fdsFaFm0CyYyqaldyX7d91XE8KR8pLxEJzJ wTNBbvETTjEc89CAuLvfEkSEmITXsyr4wFFTFwffx1Bt/nURy3/eDGE4SYOlr/HOa1qy a3ybvr7lh0bqqTqLtqdo4wUanl4nSFA6Y17iI9aEzLI1UNh9O3Q+H+pcTBSp/+GIbpxe zn2Q== X-Forwarded-Encrypted: i=1; AL+hErE51ejPtohLIksajMfm7g/PORZ+3ar/aiBjgALVObSpMOtdGx+YhQujIN4wJB6YPOeIzqhruRyJZNLBguc=@vger.kernel.org X-Gm-Message-State: APuU4Z+pPdMkmfHUJ9shTZZ7uJcwRIQi6IvOXuloxWVbVs1p9usYWrOe fBBIH3GIwYwH7j5tLScZQdIIR915CgMZQhWL+QXQsER97R8szlBM66S13iXk9h0MnA2yz0f/uJt lr+m93uotq3dj6D2QOhahMvmk6Kq6tlt8Uv3iWr1JKbMbLuO/mljzgLwLmo3HYpt+rvU= X-Gm-Gg: AYBFou2S2w/q79pgw87tjZoo7RSp8bWz2pHbn24ja0ERPaZyTvAuvRbS4A//Zb4UNwB x3d0AAb+7bciSEbNQXdjrx/F/hItbeQz+9ZC2PArFrG2RY7lvpIYaQg4bHUIzQo3faWvkf0+5hS HlkGKQe2BTPKYl+BhMB8XYRN4JUfmxGifTWZsb8+16frTEUsP0EZvOjf6QKRihO5j0G3OjNI+xY T6xjopM6lMU3K6GzzmpECqtaEZOjVXvIY4EeDkaqj7qbNvQypyFw0g2YRu1NoOfY+QjhkhXJ8Zv WuOgqXSTgOBBthJK+zzcvf8+cAwRNbRH733xqgU6Pz/boN4fIxWTwf+RT6ZJmQFzqn9pYNrCpzB b9620p3QZ1Rixt3evc+4+ICkvPq7lHGZJG4WthUg9fUMhE/fkSo/mlmQnJCb4afh8pcrhKvSYhR XWJOJtPm1vvRWT74MK5JWHZk1MU6JwrDweZB3bE0A3xYxXV9IFzX+K8T+eV+quB6d8+9w96JwJs nEoSA== X-Received: by 2002:a05:7300:841c:b0:36a:2473:9b2f with SMTP id 5a478bee46e88-36de743530bmr6566559eec.23.1793956873210; Fri, 06 Nov 2026 01:21:13 -0800 (PST) X-Received: by 2002:a05:7300:841c:b0:36a:2473:9b2f with SMTP id 5a478bee46e88-36de743530bmr6566516eec.23.1793956872547; Fri, 06 Nov 2026 01:21:12 -0800 (PST) Received: from hu-varada-blr.qualcomm.com (blr-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com. [103.229.18.19]) by smtp.gmail.com with ESMTPSA id 5a478bee46e88-36fa96fe226sm4903912eec.12.2026.11.06.01.21.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 06 Nov 2026 01:21:12 -0800 (PST) From: Varadarajan Narayanan Date: Fri, 06 Nov 2026 14:50:50 +0530 Subject: [PATCH v8 01/11] arm64: dts: qcom: ipq5210: Add nodes for multiple peripherals X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20261106-08-dts-v8-1-d91401955039@oss.qualcomm.com> References: <20261106-08-dts-v8-0-d91401955039@oss.qualcomm.com> In-Reply-To: <20261106-08-dts-v8-0-d91401955039@oss.qualcomm.com> To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Abel Vesa Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Varadarajan Narayanan , Konrad Dybcio X-Mailer: b4 0.14.3 X-Proofpoint-Spam-Info: AW1haW4tMjYxMTA2MDAzNyBTYWx0ZWRfXxui+6w84Y4ge rMbthtR3GGZAGa9pift07SEJVIATWaMg/MuwcMLRle4tYO2dbivXYAQxru1DTCr3MwEBPHoAbAM JEzBSvLH7/GACUp9L6AZnVkfNRKp578= X-Proofpoint-GUID: cHcXRGjYC7FsZzjnwlBCeoZp_T-83h-W X-Proofpoint-Spam-Details-Enc: AW1haW4tMjYxMTA2MDAzNyBTYWx0ZWRfXxH4NcNqkVGyo yj5Ho6KyHYfUYwgh6C6FnMO3QRZWAxaazaaIJCyIsabr3KdmWjZrNgVNL8CfaOtxGAqo6P/i4nX DYqusOnvEKLuFLqx15uiWUDy4GVdMp1VKKMa/3ZkDhAfh0DwwkfcvK8BG4g1WxuXJf2VqDCMQxl OAlxQCYEga1UdMcwDIXlV6Ne2bshMUTvEzFk677gNIjlUAwLhRSzFR5uBKSVkJ9wTyBlV7TnIm0 Knzgf85rQ6wcghGiTNW5v6nJKzkwIbB/UDWx4ZSvA+Qnpx5usDKsMAkn4cqKj3JA1AZdHQ9BvNn lgZD3HeKu30guB9z7jCWIHZpk7XTsLRzqmfbvoagR0S4MLgq1K6Lf7TPlTnZ4GiP7hlPQbuTkPt awfSGkNRL1tyk2MLuY8/iHzBlNURI2QHiO2ERP+v96gMyKgFGBw2/ZBury6+okdrJa/XKn27Ux/ ++GPy9Add6ZDNHwSGIg== X-Proofpoint-ORIG-GUID: cHcXRGjYC7FsZzjnwlBCeoZp_T-83h-W X-Authority-Analysis: v=2.4 cv=ZIZCCn7b c=1 sm=1 tr=0 ts=6aed9c0a cx=c_pps a=PfFC4Oe2JQzmKTvty2cRDw==:117 a=Ou0eQOY4+eZoSc0qltEV5Q==:17 a=IkcTkHD0fZMA:10 a=zJRp6_cAMcgA:10 a=s4-Qcg_JpJYA:10 a=VkNPw1HP01LnGYTKEx00:22 a=u7WPNUs3qKkmUXheDGA7:22 a=eoimf2acIAo5FJnRuUoq:22 a=EUspDBNiAAAA:8 a=L-oS5-zLtgPf8eA3vCsA:9 a=QEXdDO2ut3YA:10 a=6Ab_bkdmUrQuMsNx7PHu:22 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1176,Hydra:6.1.138,FMLib:17.12.100.49 definitions=2026-11-06_02,2026-11-04_01,2025-10-01_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 clxscore=1015 suspectscore=0 bulkscore=0 impostorscore=0 adultscore=0 priorityscore=1501 lowpriorityscore=0 spamscore=0 phishscore=0 classifier=typeunknown authscore=0 authtc= authcc= route=outbound adjust=0 reason=mlx scancount=1 engine=8.22.0-2611040001 definitions=main-2611060037 Describe common IPQ5210 SoC peripherals in the base DTSI so board DTS files can enable the hardware they use. Add nodes for USB, PCIe, QPIC NAND/BAM, QFPROM, TSENS and thermal zones. Also describe the CPU OPP table and CPU cooling cells needed for CPU frequency scaling and thermal throttling. Reviewed-by: Konrad Dybcio Signed-off-by: Varadarajan Narayanan --- arch/arm64/boot/dts/qcom/ipq5210.dtsi | 606 +++++++++++++++++++++++++++++++++- 1 file changed, 600 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi index 20e8b240642c..81af32af4047 100644 --- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi @@ -4,8 +4,11 @@ */ #include +#include #include +#include #include +#include / { #address-cells = <2>; @@ -28,36 +31,48 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "psci"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; enable-method = "psci"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; enable-method = "psci"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; enable-method = "psci"; next-level-cache = <&l2_0>; + #cooling-cells = <2>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; l2_0: l2-cache { @@ -84,6 +99,40 @@ memory@80000000 { reg = <0x0 0x80000000 0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + nvmem-cells = <&cpu_speed_bin>; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-supported-hw = <0x3>; + opp-microvolt = <850000>; + clock-latency-ns = <200000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-supported-hw = <0x3>; + opp-microvolt = <850000>; + clock-latency-ns = <200000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-supported-hw = <0x3>; + opp-microvolt = <850000>; + clock-latency-ns = <200000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-supported-hw = <0x1>; + opp-microvolt = <1000000>; + clock-latency-ns = <200000>; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; @@ -130,6 +179,170 @@ soc@0 { dma-ranges = <0 0 0 0 0x10 0>; ranges = <0 0 0 0 0x10 0>; + qusb_phy_0: phy@7b000 { + compatible = "qcom,ipq5210-qusb2-phy", "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x0007b000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo_board>; + clock-names = "cfg_ahb", + "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: phy@7d000 { + compatible = "qcom,ipq5210-qmp-usb3-phy", "qcom,ipq9574-qmp-usb3-phy"; + reg = <0x0 0x0007d000 0x0 0xa00>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&xo_board>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb0_pipe_clk"; + + status = "disabled"; + }; + + pcie0_phy: phy@84000 { + compatible = "qcom,ipq5210-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x00084000 0x0 0x1000>; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + status = "disabled"; + }; + + efuse@a4000 { + compatible = "qcom,ipq5210-qfprom", "qcom,qfprom"; + reg = <0x0 0x000a4000 0x0 0x741>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@28 { + reg = <0x28 0x1>; + bits = <0 8>; + }; + + tsens_sens11_off: s11@3dd { + reg = <0x3dd 0x1>; + bits = <4 4>; + }; + + tsens_sens12_off: s12@3de { + reg = <0x3de 0x1>; + bits = <0 4>; + }; + + tsens_sens13_off: s13@3de { + reg = <0x3de 0x1>; + bits = <4 4>; + }; + + tsens_sens14_off: s14@3e5 { + reg = <0x3e5 0x2>; + bits = <7 4>; + }; + + tsens_sens15_off: s15@3e6 { + reg = <0x3e6 0x1>; + bits = <3 4>; + }; + + tsens_mode: mode@419 { + reg = <0x419 0x1>; + bits = <0 3>; + }; + + tsens_base0: base0@419 { + reg = <0x419 0x2>; + bits = <3 10>; + }; + + tsens_base1: base1@41a { + reg = <0x41a 0x2>; + bits = <5 10>; + }; + }; + + pcie1_phy: phy@f4000 { + compatible = "qcom,ipq5210-qmp-gen3x2-pcie-phy", + "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x000f4000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + status = "disabled"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5210-tsens", "qcom,ipq5332-tsens"; + reg = <0x0 0x004a9000 0x0 0x1000>, + <0x0 0x004a8000 0x0 0x1000>; + nvmem-cells = <&tsens_mode>, + <&tsens_base0>, + <&tsens_base1>, + <&tsens_sens11_off>, + <&tsens_sens12_off>, + <&tsens_sens13_off>, + <&tsens_sens14_off>, + <&tsens_sens15_off>; + nvmem-cell-names = "mode", + "base0", + "base1", + "tsens_sens11_off", + "tsens_sens12_off", + "tsens_sens13_off", + "tsens_sens14_off", + "tsens_sens15_off"; + interrupts = ; + interrupt-names = "combined"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <5>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5210-tlmm"; reg = <0x0 0x01000000 0x0 0x300000>; @@ -146,8 +359,8 @@ gcc: clock-controller@1800000 { reg = <0x0 0x01800000 0x0 0x40000>; clocks = <&xo_board>, <&sleep_clk>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <0>; #clock-cells = <1>; @@ -205,6 +418,88 @@ sdhc: mmc@7804000 { status = "disabled"; }; + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x07984000 0x0 0x1c000>; + interrupts = ; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + + status = "okay"; + }; + + qpic_nand: spi@79b0000 { + compatible = "qcom,ipq5210-snand", "qcom,ipq9574-snand"; + reg = <0x0 0x079b0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>, + <&gcc GCC_QPIC_IO_MACRO_CLK>; + clock-names = "core", + "aon", + "iom"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", + "rx", + "cmd"; + + status = "disabled"; + }; + + usb3: usb@8a00000 { + compatible = "qcom,ipq5210-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x08a00000 0x0 0x200000>; + + clocks = <&gcc GCC_CNOC_USB_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <200000000>, + <24000000>; + + interrupts-extended = <&intc GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "qusb2_phy", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + phys = <&qusb_phy_0>, + <&ssphy_0>; + phy-names = "usb2-phy", + "usb3-phy"; + + resets = <&gcc GCC_USB_BCR>; + + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -244,6 +539,24 @@ watchdog@b017000 { clocks = <&sleep_clk>; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5210-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0 0x0b111000 0x0 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5210-a53pll"; + reg = <0x0 0x0b116000 0x0 0x1000>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0b120000 0x0 0x1000>; @@ -307,6 +620,287 @@ frame@b128000 { status = "disabled"; }; }; + + pcie1: pcie@50000000 { + compatible = "qcom,pcie-ipq5210", "qcom,pcie-ipq9574"; + reg = <0x0 0x50000000 0x0 0xf1c>, + <0x0 0x50000f20 0x0 0xa8>, + <0x0 0x50001000 0x0 0x1000>, + <0x0 0x000f0000 0x0 0x3000>, + <0x0 0x50100000 0x0 0x1000>, + <0x0 0x000f6000 0x0 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x0 0x0 0x50200000 0x0 0x00100000>, + <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + clocks = <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE1_RCHNG_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_RESET>, + <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>, + <&gcc GCC_PCIE1_AXI_S_ARES>, + <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>, + <&gcc GCC_PCIE1_AXI_M_ARES>, + <&gcc GCC_PCIE1_AUX_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + interconnects = <&gcc MASTER_CNOC_PCIE1 &gcc SLAVE_CNOC_PCIE1>, + <&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie1_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie1_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie0: pcie@70000000 { + compatible = "qcom,pcie-ipq5210", "qcom,pcie-ipq9574"; + reg = <0x0 0x70000000 0x0 0xf1c>, + <0x0 0x70000f20 0x0 0xa8>, + <0x0 0x70001000 0x0 0x1000>, + <0x0 0x00080000 0x0 0x3000>, + <0x0 0x70100000 0x0 0x1000>, + <0x0 0x00086000 0x0 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x0 0x0 0x70200000 0x0 0x00100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + clocks = <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_RESET>, + <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>, + <&gcc GCC_PCIE0_AXI_S_ARES>, + <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>, + <&gcc GCC_PCIE0_AXI_M_ARES>, + <&gcc GCC_PCIE0_AUX_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + interconnects = <&gcc MASTER_CNOC_PCIE0 &gcc SLAVE_CNOC_PCIE0>, + <&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie0_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie0_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + + thermal_zones: thermal-zones { + ethphy-thermal { + thermal-sensors = <&tsens 11>; + + trips { + ethphy-critical { + temperature = <120000>; + hysteresis = <9000>; + type = "critical"; + }; + }; + }; + + pon-uniphy-thermal { + thermal-sensors = <&tsens 12>; + + trips { + pon-uniphy-critical { + temperature = <120000>; + hysteresis = <9000>; + type = "critical"; + }; + }; + }; + + nss-top-thermal { + thermal-sensors = <&tsens 13>; + + trips { + nss-top-critical { + temperature = <120000>; + hysteresis = <9000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + thermal-sensors = <&tsens 14>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <9000>; + type = "critical"; + }; + + cpu0_thermal_alert: cpu-passive { + temperature = <100000>; + hysteresis = <9000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_thermal_alert>; + /* Set maximum frequency as 816 MHz */ + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + thermal-sensors = <&tsens 15>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <9000>; + type = "critical"; + }; + + cpu-passive { + temperature = <100000>; + hysteresis = <9000>; + type = "passive"; + }; + }; + }; }; timer { -- 2.34.1