mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Conor Dooley <conor@kernel.org>
To: Jizhou Tong <fqwqf@fqwqf.xyz>
Cc: Jingyuan Liang <jingyliang@chromium.org>,
	jikos@kernel.org, bentiss@kernel.org, dmitry.torokhov@gmail.com,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	daleyo@gmail.com, broonie@kernel.org,
	u.kleine-koenig@baylibre.com, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org
Subject: Re: [RFC PATCH v3 4/5] dt-bindings: input: hid-over-spi: add the Surface Laptop 7 touchpad
Date: Fri, 6 Nov 2026 17:43:13 +0000	[thread overview]
Message-ID: <20261106-provoke-capably-b7de457b9710@spud> (raw)
In-Reply-To: <010601a1ad2a2dba-85a8b4dd-f21b-4dbf-afae-9a40b533338d-000000@ap-northeast-1.amazonses.com>

[-- Attachment #1: Type: text/plain, Size: 2664 bytes --]

On Thu, Nov 05, 2026 at 07:23:05PM +0000, Jizhou Tong wrote:
> The Surface Laptop 7 13.8-inch (Romulus13) touchpad uses HID-over-SPI
> with quad address/data transfers. Add its compatible to the common
> binding, with both bus widths fixed to four and a 20 MHz clock limit.
> The existing supply and active-low reset properties cover this device.
> 
> Keep the G6 digitizer constraints unchanged. Pinctrl properties are
> already permitted by the common schemas and need no local definitions.
> 
> Signed-off-by: Jizhou Tong <fqwqf@fqwqf.xyz>
> ---
>  .../bindings/input/hid-over-spi.yaml          | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/hid-over-spi.yaml b/Documentation/devicetree/bindings/input/hid-over-spi.yaml
> index bed0746f00..ec8c72493d 100644
> --- a/Documentation/devicetree/bindings/input/hid-over-spi.yaml
> +++ b/Documentation/devicetree/bindings/input/hid-over-spi.yaml
> @@ -22,11 +22,30 @@ description: |+
>  allOf:
>    - $ref: /schemas/input/touchscreen/touchscreen.yaml#
>    - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: microsoft,romulus13-touchpad
> +    then:
> +      properties:
> +        spi-max-frequency:
> +          maximum: 20000000
> +        spi-rx-bus-width:
> +          items:
> +            - const: 4

Should this not just be "const: 4", since the property is not an array?

Cheers,
Conor.

> +        spi-tx-bus-width:
> +          items:
> +            - const: 4
> +      required:
> +        - spi-rx-bus-width
> +        - spi-tx-bus-width
>  
>  properties:
>    compatible:
>      enum:
>        - microsoft,g6-touch-digitizer
> +      - microsoft,romulus13-touchpad
>  
>    reg:
>      maxItems: 1
> @@ -73,3 +92,24 @@ examples:
>          pinctrl-0 = <&ts_d6_int_bias>;
>        };
>      };
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      touchpad@0 {
> +        compatible = "microsoft,romulus13-touchpad";
> +        reg = <0>;
> +        spi-max-frequency = <20000000>;
> +        spi-rx-bus-width = <4>;
> +        spi-tx-bus-width = <4>;
> +        interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
> +        vdd-supply = <&vreg_ts_5p0>;
> +        reset-gpios = <&tlmm 120 GPIO_ACTIVE_LOW>;
> +        pinctrl-0 = <&touchpad_reset>;
> +        pinctrl-names = "default";
> +      };
> +    };

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2026-11-06 17:43 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-09 22:25 [PATCH v5 00/11] Add spi-hid transport driver Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 01/11] Documentation: Correction in HID output_report callback description Jingyuan Liang
2026-10-12  6:04   ` Krzysztof Kozlowski
2026-10-13 20:49     ` Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 02/11] HID: Add BUS_SPI support and define HID_SPI_DEVICE macro Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 03/11] HID: spi-hid: add transport driver skeleton for HID over SPI bus Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 04/11] HID: spi-hid: add spi-hid driver HID layer Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 05/11] HID: spi-hid: add HID SPI protocol implementation Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 06/11] HID: spi-hid: add spi_hid traces Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 07/11] HID: spi-hid: add ACPI support for HID over SPI Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 08/11] HID: spi-hid: add device tree " Jingyuan Liang
2026-10-12 12:49   ` Uwe Kleine-König
2026-10-13 22:26     ` Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 09/11] dt-bindings: input: Document hid-over-spi DT schema Jingyuan Liang
2026-10-12  6:05   ` Krzysztof Kozlowski
2026-10-13 22:28     ` Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 10/11] HID: spi-hid: add power management implementation Jingyuan Liang
2026-10-09 22:25 ` [PATCH v5 11/11] HID: spi-hid: add panel follower support Jingyuan Liang
2026-10-10 16:57 ` [PATCH 0/2] HID: spi-hid: handle reset assertion and resume handshake failures fQwQf
2026-10-13  2:54   ` [PATCH v2 " Jizhou Tong
2026-10-13  3:11     ` [PATCH v2 1/2] HID: spi-hid: propagate reset assertion errors during initialization Jizhou Tong
2026-10-13  3:11     ` [PATCH v2 2/2] HID: spi-hid: report a missing reset handshake on resume Jizhou Tong
2026-11-05 19:01     ` [PATCH v3 0/2] HID: spi-hid: propagate reset GPIO errors Jizhou Tong
2026-11-05 19:15       ` [PATCH v3 1/2] HID: spi-hid: propagate reset assertion errors during initialization Jizhou Tong
2026-11-05 19:15       ` [PATCH v3 2/2] HID: spi-hid: propagate reset GPIO errors from resume Jizhou Tong
2026-10-10 16:57 ` [RFC PATCH 0/6] HID: spi-hid: add Romulus13 quad-SPI support on v5 fQwQf
2026-10-13  3:13   ` [RFC PATCH v2 " Jizhou Tong
2026-10-13  3:28     ` [RFC PATCH v2 1/6] HID: spi-hid: isolate DMA transfers from protocol buffers Jizhou Tong
2026-10-13  3:28     ` [RFC PATCH v2 2/6] HID: spi-hid: add spi-mem quad-SPI transfers Jizhou Tong
2026-10-13  3:28     ` [RFC PATCH v2 3/6] HID: spi-hid: assemble bounded fragmented input reports Jizhou Tong
2026-10-13  3:28     ` [RFC PATCH v2 4/6] dt-bindings: input: describe the Romulus13 QSPI touchpad Jizhou Tong
2026-10-28 17:58       ` Conor Dooley
2026-10-13  3:28     ` [RFC PATCH v2 5/6] HID: spi-hid: support " Jizhou Tong
2026-10-13  3:28     ` [RFC PATCH v2 6/6] HID: spi-hid: expose readiness for reset diagnostics Jizhou Tong
2026-11-05 19:19     ` [RFC PATCH v3 0/5] HID: spi-hid: add quad-SPI support for Romulus13 Jizhou Tong
2026-11-05 19:22       ` [RFC PATCH v3 1/5] HID: spi-hid: isolate DMA transfers from protocol buffers Jizhou Tong
2026-11-05 19:23       ` [RFC PATCH v3 2/5] HID: spi-hid: add spi-mem quad-SPI transfers Jizhou Tong
2026-11-05 19:23       ` [RFC PATCH v3 3/5] HID: spi-hid: assemble bounded fragmented input reports Jizhou Tong
2026-11-05 19:23       ` [RFC PATCH v3 4/5] dt-bindings: input: hid-over-spi: add the Surface Laptop 7 touchpad Jizhou Tong
2026-11-06 17:43         ` Conor Dooley [this message]
2026-11-05 19:23       ` [RFC PATCH v3 5/5] HID: spi-hid: support the Romulus13 QSPI touchpad Jizhou Tong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261106-provoke-capably-b7de457b9710@spud \
    --to=conor@kernel.org \
    --cc=bentiss@kernel.org \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=daleyo@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=fqwqf@fqwqf.xyz \
    --cc=jikos@kernel.org \
    --cc=jingyliang@chromium.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®