mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wei Tao <taowei@kylinos.cn>
To: jhs@mojatatu.com, jiri@resnulli.us, davem@davemloft.net,
	edumazet@kernel.org, kuba@kernel.org, pabeni@redhat.com
Cc: horms@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Wei Tao <taowei@kylinos.cn>
Subject: [PATCH net-next v2] net/sched: cls_flow: avoid integer overflow in perturb_period
Date: Fri,  6 Nov 2026 14:38:23 +0800	[thread overview]
Message-ID: <20261106063823.99731-1-taowei@kylinos.cn> (raw)

flow_change() calculates perturb_period by directly multiplying
nla_get_u32(tb[TCA_FLOW_PERTURB]) by HZ, without any overflow
protection. Since perturb_period is a u32, the multiplication
overflows when the value from netlink exceeds UINT_MAX / HZ.
The result can be an unexpectedly short period or even zero.

  # tc qdisc add dev lo clsact
  # tc filter add dev lo ingress protocol ip pref 1 handle 1 flow \
        hash keys src perturb 42949673 baseclass 1:10

With HZ=100, 42949673*100=4294967300, but UINT_MAX is 4294967295,
so the product wraps to 4 jiffies.

Both the filter-modify and filter-create paths in flow_change()
are affected.

Since perturb_period is ultimately fed to mod_timer(), and
calc_wheel_index() internally casts delta to signed long for
comparison, reject values greater than INT_MAX / HZ. Besides
preventing the u32 multiplication from wrapping, this also
keeps the relative timeout within the signed-long range on
32-bit systems.

The missing check was noticed while reviewing commit 7ca52541c05c
("net_sched: sch_sfq: reject invalid perturb period"). An
LLM-assisted analysis of the same pattern then showed that cls_flow
performs the same unchecked seconds-to-jiffies conversion in both
its create and change paths, and needs the same range check.

Tested on aarch64 with CONFIG_HZ=100:

  # tc qdisc add dev lo clsact
  # tc filter add dev lo ingress protocol ip pref 1 handle 1 flow \
        hash keys src perturb 42949673 baseclass 1:10
  Error: cls_flow: invalid perturb period.

  # tc filter add dev lo ingress protocol ip pref 1 handle 1 flow \
        hash keys src perturb 100 baseclass 1:10
  # tc filter show dev lo ingress | cut -d' ' -f9-
  handle 0x1 hash keys src baseclass 1:10 perturb 100sec

  # tc filter change dev lo ingress protocol ip pref 1 handle 1 flow \
        hash keys src perturb 42949673 baseclass 1:10
  Error: cls_flow: invalid perturb period.
  # tc filter show dev lo ingress | cut -d' ' -f9-
  handle 0x1 hash keys src baseclass 1:10 perturb 100sec

Signed-off-by: Wei Tao <taowei@kylinos.cn>
---
v2: https://lore.kernel.org/netdev/20261016040330.59041-1-taowei@kylinos.cn/
  - drop the Fixes and Cc: stable tags: this is hardening
  - describe how the issue was found and add the tested commands
 net/sched/cls_flow.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index 2ef449706638..4f2d63722e16 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -408,6 +408,7 @@ static int flow_change(struct net *net, struct sk_buff *in_skb,
 	u32 keymask = 0;
 	u32 mode;
 	int err;
+	u32 val;
 
 	if (opt == NULL)
 		return -EINVAL;
@@ -486,7 +487,13 @@ static int flow_change(struct net *net, struct sk_buff *in_skb,
 		if (tb[TCA_FLOW_PERTURB]) {
 			if (mode != FLOW_MODE_HASH)
 				goto err2;
-			perturb_period = nla_get_u32(tb[TCA_FLOW_PERTURB]) * HZ;
+			val = nla_get_u32(tb[TCA_FLOW_PERTURB]);
+			if (val > INT_MAX / HZ) {
+				NL_SET_ERR_MSG_MOD(extack, "invalid perturb period");
+				err = -EINVAL;
+				goto err2;
+			}
+			perturb_period = val * HZ;
 		}
 	} else {
 		err = -EINVAL;
@@ -504,7 +511,13 @@ static int flow_change(struct net *net, struct sk_buff *in_skb,
 		if (tb[TCA_FLOW_PERTURB]) {
 			if (mode != FLOW_MODE_HASH)
 				goto err2;
-			perturb_period = nla_get_u32(tb[TCA_FLOW_PERTURB]) * HZ;
+			val = nla_get_u32(tb[TCA_FLOW_PERTURB]);
+			if (val > INT_MAX / HZ) {
+				NL_SET_ERR_MSG_MOD(extack, "invalid perturb period");
+				err = -EINVAL;
+				goto err2;
+			}
+			perturb_period = val * HZ;
 		}
 
 		if (TC_H_MAJ(baseclass) == 0) {

base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
-- 
2.25.1


             reply	other threads:[~2026-11-06  6:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-06  6:38 Wei Tao [this message]
2026-11-12 13:43 ` Paolo Abeni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261106063823.99731-1-taowei@kylinos.cn \
    --to=taowei@kylinos.cn \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=horms@kernel.org \
    --cc=jhs@mojatatu.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®