mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Andrew Jackson <Andrew.Jackson@arm.com>,
	Mark Brown <broonie@kernel.org>,
	Xingyu Wu <xingyu.wu@starfivetech.com>
Cc: Tim Bird <tim.bird@sony.com>,
	Yuri Zaporozhets <yuriz@vodafonemail.de>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Maxim Kochetkov <fido_max@inbox.ru>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 4/5] ASoC: dwc: Fix DMA fifo_size calculation
Date: Fri,  6 Nov 2026 18:29:39 +0700	[thread overview]
Message-ID: <20261106112940.53550-5-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20261106112940.53550-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

fifo_size should be the FIFO size in bytes (depth * width / 8), but
the code shifts by 8 instead of 3. For capture the parentheses also
make it always 0.

Use depth * width / 8 for both directions.

Fixes: 52ea7c0543f8 ("ASoC: dwc: i2s: Add StarFive JH7110 SoC support")
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/dwc/dwc-i2s.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c
index 0de7bcb2d0c5..1ff5b6f8864d 100644
--- a/sound/soc/dwc/dwc-i2s.c
+++ b/sound/soc/dwc/dwc-i2s.c
@@ -664,14 +664,14 @@ static int dw_configure_dai_by_pd(struct dw_i2s_dev *dev,
 			idx2 = COMP1_TX_WORDSIZE_0(comp1);
 			dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
 			dev->play_dma_data.dt.fifo_size = dev->fifo_th * 2 *
-				(fifo_width[idx2]) >> 8;
+							  fifo_width[idx2] / 8;
 			dev->play_dma_data.dt.maxburst = 16;
 		}
 		if (COMP1_RX_ENABLED(comp1)) {
 			idx2 = COMP2_RX_WORDSIZE_0(comp2);
 			dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
 			dev->capture_dma_data.dt.fifo_size = dev->fifo_th * 2 *
-				(fifo_width[idx2] >> 8);
+							     fifo_width[idx2] / 8;
 			dev->capture_dma_data.dt.maxburst = 16;
 		}
 	} else {
@@ -711,7 +711,7 @@ static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 		dev->capability |= DWC_I2S_PLAY;
 		dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
 		dev->play_dma_data.dt.fifo_size = fifo_depth *
-			(fifo_width[idx2]) >> 8;
+						  fifo_width[idx2] / 8;
 		dev->play_dma_data.dt.maxburst = 16;
 	}
 	if (COMP1_RX_ENABLED(comp1)) {
@@ -720,7 +720,7 @@ static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 		dev->capability |= DWC_I2S_RECORD;
 		dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
 		dev->capture_dma_data.dt.fifo_size = fifo_depth *
-			(fifo_width[idx2] >> 8);
+						     fifo_width[idx2] / 8;
 		dev->capture_dma_data.dt.maxburst = 16;
 	}
 
-- 
2.43.0


  parent reply	other threads:[~2026-11-06 11:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-06 11:29 [PATCH 0/5] Fix several issues in the DesignWare I2S driver phucduc.bui
2026-11-06 11:29 ` [PATCH 1/5] ASoC: dwc: Fix bit clock rate in TDM mode phucduc.bui
2026-11-06 11:29 ` [PATCH 2/5] ASoC: dwc: Fix error handling in dw_i2s_set_fmt() phucduc.bui
2026-11-06 11:29 ` [PATCH 3/5] ASoC: dwc: Fix channels_max derived from COMP_PARAM_1 phucduc.bui
2026-11-06 11:29 ` phucduc.bui [this message]
2026-11-06 11:29 ` [PATCH 5/5] ASoC: dwc: Remove redundant error messages phucduc.bui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261106112940.53550-5-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=Andrew.Jackson@arm.com \
    --cc=broonie@kernel.org \
    --cc=fido_max@inbox.ru \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tim.bird@sony.com \
    --cc=tiwai@suse.com \
    --cc=xingyu.wu@starfivetech.com \
    --cc=yuriz@vodafonemail.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®