From: Usama Arif <usama.arif@linux.dev>
To: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: Usama Arif <usama.arif@linux.dev>,
Andrew Morton <akpm@linux-foundation.org>,
Zi Yan <ziy@nvidia.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
"Liam R. Howlett" <liam@infradead.org>,
Nico Pache <nico.pache@linux.dev>,
Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
Barry Song <baohua@kernel.org>, Lance Yang <lance.yang@linux.dev>,
Kiryl Shutsemau <kas@kernel.org>, Qi Zheng <qi.zheng@linux.dev>,
Hugh Dickins <hughd@google.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH v2 2/2] mm: don't allocate a page table under RCU in do_set_pmd()
Date: Fri, 6 Nov 2026 07:56:03 -0800 [thread overview]
Message-ID: <20261106155604.3999641-1-usama.arif@linux.dev> (raw)
In-Reply-To: <20261106-khugepaged_set_pmd-v2-2-d2457b5e377a@kernel.org>
On Fri, 06 Nov 2026 13:36:13 +0100 "David Hildenbrand (Arm)" <david@kernel.org> wrote:
> do_fault_around() skips PTE table preallocation when the PMD already points
> to a PTE table. A concurrent collapse can then retract that table and
> clear the PMD before filemap_map_pages() locks the new PMD-sized folio.
>
> filemap_map_pmd() can then call do_set_pmd() with an empty PMD and no
> preallocated table. On PowerPC hash MMU, do_set_pmd() then tries
> allocating a PTE table to deposit. But filemap_map_pmd() calls
> do_set_pmd() under RCU, so allocating from that context is not good.
>
> This race became possible when retract_page_tables() stopped taking the
> mmap and VMA locks. Previously, those locks excluded retraction while
> the fault was in progress.
>
> Add a may_alloc argument to do_set_pmd() and pass false from
> filemap_map_pmd(), so we can fail with VM_FAULT_FALLBACK instead of
> trying to allocate.
>
> This issue should be fairly hard to hit in practice.
>
Yes, I imagine it was very difficult to reproduce, doing a sleeping
pte_alloc_one() inside filemap_map_pmd()'s RCU read-side section
when a concurrent retract_page_tables() empties the PMD. Only
possible on PowerPC.
> Fixes: 1d65b771bc08 ("mm/khugepaged: retract_page_tables() without mmap or vma lock")
> Cc: stable@vger.kernel.org
> Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
> ---
Acked-by: Usama Arif <usama.arif@linux.dev>
> include/linux/mm.h | 3 ++-
> mm/filemap.c | 2 +-
> mm/khugepaged.c | 2 +-
> mm/memory.c | 10 +++++++---
> 4 files changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index a2dd76cc5bbfe..bd144fec5f5da 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -2156,7 +2156,8 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
> return pte;
> }
>
> -vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *page);
> +vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *page,
> + bool may_alloc);
> void set_pte_range(struct vm_fault *vmf, struct folio *folio,
> struct page *page, unsigned int nr, unsigned long addr);
>
> diff --git a/mm/filemap.c b/mm/filemap.c
> index 86297841f9955..9871b4f32a916 100644
> --- a/mm/filemap.c
> +++ b/mm/filemap.c
> @@ -3745,7 +3745,7 @@ static bool filemap_map_pmd(struct vm_fault *vmf, struct folio *folio,
>
> if (pmd_none(*vmf->pmd) && folio_test_pmd_mappable(folio)) {
> struct page *page = folio_file_page(folio, start);
> - vm_fault_t ret = do_set_pmd(vmf, folio, page);
> + vm_fault_t ret = do_set_pmd(vmf, folio, page, /* may_alloc= */ false);
> if (!ret) {
> /* The page is mapped successfully, reference consumed. */
> folio_unlock(folio);
> diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> index 8d9f05a39afb3..5836e08abc984 100644
> --- a/mm/khugepaged.c
> +++ b/mm/khugepaged.c
> @@ -1826,7 +1826,7 @@ static enum scan_result set_huge_pmd(struct vm_area_struct *vma, unsigned long a
> }
>
> vmf.pmd = pmdp;
> - if (do_set_pmd(&vmf, folio, page))
> + if (do_set_pmd(&vmf, folio, page, /* may_alloc= */ true))
> return SCAN_FAIL;
>
> folio_get(folio);
> diff --git a/mm/memory.c b/mm/memory.c
> index 421064aef3cf0..6eeed43b05a19 100644
> --- a/mm/memory.c
> +++ b/mm/memory.c
> @@ -5682,7 +5682,8 @@ static void deposit_prealloc_pte(struct vm_fault *vmf)
> vmf->prealloc_pte = NULL;
> }
>
> -vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *page)
> +vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *page,
> + bool may_alloc)
> {
> struct vm_area_struct *vma = vmf->vma;
> bool write = vmf->flags & FAULT_FLAG_WRITE;
> @@ -5723,6 +5724,8 @@ vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *pa
> * related to pte entry. Use the preallocated table for that.
> */
> if (arch_needs_pgtable_deposit() && !vmf->prealloc_pte) {
> + if (!may_alloc)
> + return VM_FAULT_FALLBACK;
> vmf->prealloc_pte = pte_alloc_one(vma->vm_mm);
> if (!vmf->prealloc_pte)
> return VM_FAULT_OOM;
> @@ -5764,7 +5767,8 @@ vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *pa
> return ret;
> }
> #else
> -vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *page)
> +vm_fault_t do_set_pmd(struct vm_fault *vmf, struct folio *folio, struct page *page,
> + bool may_alloc)
> {
> return VM_FAULT_FALLBACK;
> }
> @@ -5888,7 +5892,7 @@ vm_fault_t finish_fault(struct vm_fault *vmf)
>
> if (pmd_none(*vmf->pmd)) {
> if (!needs_fallback && folio_test_pmd_mappable(folio)) {
> - ret = do_set_pmd(vmf, folio, page);
> + ret = do_set_pmd(vmf, folio, page, /* may_alloc= */ true);
> if (ret != VM_FAULT_FALLBACK)
> return ret;
> }
>
> --
> 2.43.0
>
>
prev parent reply other threads:[~2026-11-06 15:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 12:36 [PATCH v2 0/2] mm: free unused page table allocated by do_set_pmd() David Hildenbrand (Arm)
2026-11-06 12:36 ` [PATCH v2 1/2] " David Hildenbrand (Arm)
2026-11-06 15:34 ` Usama Arif
2026-11-06 12:36 ` [PATCH v2 2/2] mm: don't allocate a page table under RCU in do_set_pmd() David Hildenbrand (Arm)
2026-11-06 15:56 ` Usama Arif [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261106155604.3999641-1-usama.arif@linux.dev \
--to=usama.arif@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=hughd@google.com \
--cc=kas@kernel.org \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nico.pache@linux.dev \
--cc=qi.zheng@linux.dev \
--cc=ryan.roberts@arm.com \
--cc=stable@vger.kernel.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®