[PATCH 4/4] wifi: brcmfmac: msgbuf: send the flowring delete without waiting for tx status

[Andre Eikmeyer <dev@deq.rocks>]

The BCM4377 firmware returns the tx status of queued packets only when
it gets the flowring delete request. brcmf_msgbuf_delete_flowring()
waits up to 100 ms for them before it sends the request, so every
disconnect logs a timeout, and the cleared counter goes below zero when
the status arrives.

The race the wait was added for in commit 0fa24196e425 ("wifi: brcmfmac:
fix continuous 802.1x tx pending timeout error") is covered by
RING_CLOSING since commit 09be7546a602 ("wifi: brcmfmac: fix scheduling
while atomic issue when deleting flowring"), and late tx status still
releases the packet. Send the delete right away and reset the counter
when the ring is created.

Signed-off-by: Andre Eikmeyer <dev@deq.rocks>
---
 .../broadcom/brcm80211/brcmfmac/msgbuf.c      | 23 ++++++++-----------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
index 8e5c697e7f1..a9ccf647f9a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -73,7 +73,6 @@
 #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS	32
 #define BRCMF_MSGBUF_UPDATE_RX_PTR_THRS		48
 
-#define BRCMF_MAX_TXSTATUS_WAIT_RETRIES		10
 
 struct msgbuf_common_hdr {
 	u8				msgtype;
@@ -645,6 +644,7 @@ brcmf_msgbuf_flowring_create_worker(struct brcmf_msgbuf *msgbuf,
 	brcmf_commonring_config(msgbuf->flowrings[flowid],
 				BRCMF_H2D_TXFLOWRING_MAX_ITEM,
 				BRCMF_H2D_TXFLOWRING_ITEMSIZE, dma_buf);
+	atomic_set(&msgbuf->flowrings[flowid]->outstanding_tx, 0);
 
 	commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
 	brcmf_commonring_lock(commonring);
@@ -1330,6 +1330,10 @@ brcmf_msgbuf_process_flow_ring_delete_response(struct brcmf_msgbuf *msgbuf,
 	}
 	brcmf_dbg(MSGBUF, "Flowring %d Delete response status %d\n", flowid,
 		  status);
+	if (atomic_read(&msgbuf->flowrings[flowid]->outstanding_tx))
+		brcmf_dbg(MSGBUF, "Flowring %d deleted with %d tx status outstanding\n",
+			  flowid,
+			  atomic_read(&msgbuf->flowrings[flowid]->outstanding_tx));
 
 	brcmf_msgbuf_remove_flowring(msgbuf, flowid);
 }
@@ -1471,23 +1475,16 @@ void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid)
 	void *ret_ptr;
 	u8 ifidx;
 	int err;
-	int retry = BRCMF_MAX_TXSTATUS_WAIT_RETRIES;
 
-	/* make sure it is not in txflow */
+	/*
+	 * Make sure txflow posts nothing more to the ring. The firmware returns
+	 * the tx status of the posted packets when it deletes the ring, before
+	 * it sends the delete response.
+	 */
 	brcmf_commonring_lock(commonring_del);
 	flow->rings[flowid]->status = RING_CLOSING;
 	brcmf_commonring_unlock(commonring_del);
 
-	/* wait for commonring txflow finished */
-	while (retry && atomic_read(&commonring_del->outstanding_tx)) {
-		usleep_range(5000, 10000);
-		retry--;
-	}
-	if (!retry) {
-		brcmf_err("timed out waiting for txstatus\n");
-		atomic_set(&commonring_del->outstanding_tx, 0);
-	}
-
 	/* no need to submit if firmware can not be reached */
 	if (drvr->bus_if->state != BRCMF_BUS_UP) {
 		brcmf_dbg(MSGBUF, "bus down, flowring will be removed\n");