From: Tristan Madani <tristmd@gmail.com>
To: Oder Chiou <oder_chiou@realtek.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>, Bard Liao <bardliao@realtek.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
Tristan Madani <tristan@talencesecurity.com>
Subject: [PATCH v2] ASoC: rt5668: fix teardown order and stale state across card rebind
Date: Sat, 7 Nov 2026 16:10:24 +0000 [thread overview]
Message-ID: <20261107161024.1233587-1-tristmd@gmail.com> (raw)
From: Tristan Madani <tristan@talencesecurity.com>
The cleanup in rt5668_remove() does not reset hs_jack, jack_type, or
the component pointer, and does not mark the regmap cache dirty after
the codec reset. On card rebind this leaves a dangling hs_jack pointer
and causes regmap_update_bits() to skip re-programming jack-detection
registers because the cache still holds the pre-reset values.
Additionally, SAR and button-detection registers from a previous
headset session remain cached after the hardware reset.
regcache_sync() on rebind restores this stale state while jack_type
is zero, leaving the SAR source on button mode. Clear the headset
state by calling rt5668_headset_detect(component, 0) before the
codec reset.
If the I2C device unbinds without a card bound, rt5668_remove() is
never called and the IRQ keeps queuing jack_detect_work until devres
frees the private data. Register a devm action to disable the IRQ
and cancel both delayed works on any I2C teardown path. Guard
disable_irq() in rt5668_i2c_shutdown() with the irq_disabled flag
to avoid an unbalanced disable when rt5668_remove() already ran.
Store the I2C client pointer in rt5668_priv so all paths can
reference it directly.
Fixes: d59fb2856223 ("ASoC: rt5668: add rt5668B codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
---
Changes in v2:
- Clear SAR/button register state via rt5668_headset_detect(component, 0)
before codec reset to prevent stale detection state on rebind
- Guard disable_irq() in rt5668_i2c_shutdown() with irq_disabled flag to
avoid unbalanced disable when rt5668_remove() already ran
sound/soc/codecs/rt5668.c | 38 +++++++++++++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5668.c b/sound/soc/codecs/rt5668.c
index 29d70802a046a..c8aeaf25a7fd8 100644
--- a/sound/soc/codecs/rt5668.c
+++ b/sound/soc/codecs/rt5668.c
@@ -45,6 +45,7 @@ struct rt5668_priv {
struct rt5668_platform_data pdata;
struct gpio_desc *ldo1_en;
struct regmap *regmap;
+ struct i2c_client *i2c;
struct snd_soc_jack *hs_jack;
struct regulator_bulk_data supplies[RT5668_NUM_SUPPLIES];
struct delayed_work jack_detect_work;
@@ -2213,14 +2214,26 @@ static int rt5668_set_bias_level(struct snd_soc_component *component,
return 0;
}
+static void rt5668_i2c_disable_irq_and_cancel_work(void *data)
+{
+ struct rt5668_priv *rt5668 = data;
+
+ if (rt5668->irq_acquired && !rt5668->irq_disabled)
+ disable_irq(rt5668->i2c->irq);
+ cancel_delayed_work_sync(&rt5668->jack_detect_work);
+ cancel_delayed_work_sync(&rt5668->jd_check_work);
+}
+
static int rt5668_probe(struct snd_soc_component *component)
{
struct rt5668_priv *rt5668 = snd_soc_component_get_drvdata(component);
rt5668->component = component;
+ regcache_sync(rt5668->regmap);
+
if (rt5668->irq_disabled) {
- enable_irq(to_i2c_client(component->dev)->irq);
+ enable_irq(rt5668->i2c->irq);
rt5668->irq_disabled = false;
}
@@ -2230,17 +2243,24 @@ static int rt5668_probe(struct snd_soc_component *component)
static void rt5668_remove(struct snd_soc_component *component)
{
struct rt5668_priv *rt5668 = snd_soc_component_get_drvdata(component);
- struct i2c_client *i2c = to_i2c_client(component->dev);
if (rt5668->irq_acquired) {
- disable_irq(i2c->irq);
+ disable_irq(rt5668->i2c->irq);
rt5668->irq_disabled = true;
}
cancel_delayed_work_sync(&rt5668->jack_detect_work);
cancel_delayed_work_sync(&rt5668->jd_check_work);
+ if (rt5668->jack_type)
+ rt5668_headset_detect(component, 0);
+
+ rt5668->hs_jack = NULL;
+ rt5668->jack_type = 0;
+ rt5668->component = NULL;
+
rt5668_reset(rt5668->regmap);
+ regcache_mark_dirty(rt5668->regmap);
}
#ifdef CONFIG_PM
@@ -2576,6 +2596,13 @@ static int rt5668_i2c_probe(struct i2c_client *i2c)
rt5668->irq_acquired = true;
}
+ rt5668->i2c = i2c;
+ ret = devm_add_action_or_reset(&i2c->dev,
+ rt5668_i2c_disable_irq_and_cancel_work,
+ rt5668);
+ if (ret)
+ return ret;
+
return devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5668,
rt5668_dai, ARRAY_SIZE(rt5668_dai));
}
@@ -2584,6 +2611,11 @@ static void rt5668_i2c_shutdown(struct i2c_client *client)
{
struct rt5668_priv *rt5668 = i2c_get_clientdata(client);
+ if (rt5668->irq_acquired && !rt5668->irq_disabled)
+ disable_irq(client->irq);
+ cancel_delayed_work_sync(&rt5668->jack_detect_work);
+ cancel_delayed_work_sync(&rt5668->jd_check_work);
+
rt5668_reset(rt5668->regmap);
}
--
2.47.3
reply other threads:[~2026-11-07 16:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261107161024.1233587-1-tristmd@gmail.com \
--to=tristmd@gmail.com \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tristan@talencesecurity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®