From: Tristan Madani <tristmd@gmail.com>
To: Oder Chiou <oder_chiou@realtek.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>, Bard Liao <bardliao@realtek.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org,
Tristan Madani <tristan@talencesecurity.com>
Subject: [PATCH] ASoC: rt5659: fix teardown order and stale state across card rebind
Date: Sat, 7 Nov 2026 16:23:41 +0000 [thread overview]
Message-ID: <20261107162341.1494240-1-tristmd@gmail.com> (raw)
From: Tristan Madani <tristan@talencesecurity.com>
The cleanup in rt5659_remove() does not reset hs_jack, jack_type, or
the component pointer, and does not mark the regmap cache dirty after
the codec reset. On card rebind this leaves a dangling hs_jack pointer
and causes regmap_update_bits() to skip re-programming jack-detection
registers because the cache still holds the pre-reset values.
Additionally, headset detection registers from a previous session
remain cached after the hardware reset. regcache_sync() on rebind
restores this stale state, which can leave the SAR source on button
mode or HDA plug flags in an incorrect state. Clear the headset
state by calling rt5659_headset_detect(component, 0) before the
codec reset, and reset the HDA header plug tracking flags.
If the I2C device unbinds without a card bound, rt5659_remove() is
never called and the IRQ keeps queuing jack_detect_work until devres
frees the private data. Register a devm action to disable the IRQ
and cancel the delayed work on any I2C teardown path. Guard
disable_irq() in rt5659_i2c_shutdown() with the irq_disabled flag
to avoid an unbalanced disable when rt5659_remove() already ran.
Store the I2C client pointer in rt5659_priv so all paths can
reference it directly.
Fixes: d3cb2de2479b ("ASoC: rt5659: add rt5659 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
---
sound/soc/codecs/rt5659.c | 39 ++++++++++++++++++++++++++++++++++++---
sound/soc/codecs/rt5659.h | 1 +
2 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 68f7d5673e190..14111f40384e5 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -3660,6 +3660,16 @@ static int rt5659_set_bias_level(struct snd_soc_component *component,
return 0;
}
+static void rt5659_i2c_disable_irq_and_cancel_work(void *data)
+{
+ struct rt5659_priv *rt5659 = data;
+
+ if (rt5659->irq_acquired && !rt5659->irq_disabled)
+ disable_irq(rt5659->i2c->irq);
+ if (rt5659->jack_detect_work_inited)
+ cancel_delayed_work_sync(&rt5659->jack_detect_work);
+}
+
static int rt5659_probe(struct snd_soc_component *component)
{
struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
@@ -3667,8 +3677,10 @@ static int rt5659_probe(struct snd_soc_component *component)
rt5659->component = component;
+ regcache_sync(rt5659->regmap);
+
if (rt5659->irq_disabled) {
- enable_irq(to_i2c_client(component->dev)->irq);
+ enable_irq(rt5659->i2c->irq);
rt5659->irq_disabled = false;
}
@@ -3689,17 +3701,26 @@ static int rt5659_probe(struct snd_soc_component *component)
static void rt5659_remove(struct snd_soc_component *component)
{
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
- struct i2c_client *i2c = to_i2c_client(component->dev);
if (rt5659->irq_acquired) {
- disable_irq(i2c->irq);
+ disable_irq(rt5659->i2c->irq);
rt5659->irq_disabled = true;
}
if (rt5659->jack_detect_work_inited)
cancel_delayed_work_sync(&rt5659->jack_detect_work);
+ if (rt5659->jack_type)
+ rt5659_headset_detect(component, 0);
+
+ rt5659->hs_jack = NULL;
+ rt5659->jack_type = 0;
+ rt5659->hda_hp_plugged = false;
+ rt5659->hda_mic_plugged = false;
+ rt5659->component = NULL;
+
regmap_write(rt5659->regmap, RT5659_RESET, 0);
+ regcache_mark_dirty(rt5659->regmap);
}
#ifdef CONFIG_PM
@@ -4328,6 +4349,13 @@ static int rt5659_i2c_probe(struct i2c_client *i2c)
RT5659_GP1_PIN_MASK, RT5659_GP1_PIN_IRQ);
}
+ rt5659->i2c = i2c;
+ ret = devm_add_action_or_reset(&i2c->dev,
+ rt5659_i2c_disable_irq_and_cancel_work,
+ rt5659);
+ if (ret)
+ return ret;
+
return devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_rt5659,
rt5659_dai, ARRAY_SIZE(rt5659_dai));
@@ -4337,6 +4365,11 @@ static void rt5659_i2c_shutdown(struct i2c_client *client)
{
struct rt5659_priv *rt5659 = i2c_get_clientdata(client);
+ if (rt5659->irq_acquired && !rt5659->irq_disabled)
+ disable_irq(client->irq);
+ if (rt5659->jack_detect_work_inited)
+ cancel_delayed_work_sync(&rt5659->jack_detect_work);
+
regmap_write(rt5659->regmap, RT5659_RESET, 0);
}
diff --git a/sound/soc/codecs/rt5659.h b/sound/soc/codecs/rt5659.h
index e10b3844501b9..1118e6ab1887d 100644
--- a/sound/soc/codecs/rt5659.h
+++ b/sound/soc/codecs/rt5659.h
@@ -1793,6 +1793,7 @@ struct rt5659_priv {
struct snd_soc_component *component;
struct rt5659_platform_data pdata;
struct regmap *regmap;
+ struct i2c_client *i2c;
struct gpio_desc *gpiod_ldo1_en;
struct gpio_desc *gpiod_reset;
struct snd_soc_jack *hs_jack;
--
2.47.3
reply other threads:[~2026-11-07 16:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261107162341.1494240-1-tristmd@gmail.com \
--to=tristmd@gmail.com \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tristan@talencesecurity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®