mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Yang <mmyangfl@gmail.com>
To: netdev@vger.kernel.org
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: dsa: motorcomm: Free the MIB block on port teardown
Date: Sun,  8 Nov 2026 18:15:45 +0800	[thread overview]
Message-ID: <20261108101648.1308271-1-mmyangfl@gmail.com> (raw)

.setup() can run again within one registration: removing another switch
from the tree tears the whole tree down, and re-probing sets every
member switch up again.

The hardware reset at the start of .setup() brings the MIB counters back
to zero, but a MIB block kept across that cycle still holds the old
software buffer, so the next yt921x_mib_read() treats the small value as
a 32-bit wrap and adds 2^32 to every counter it extends.

The old claim, get_stats64() not being synchronized with
.port_teardown(), is not true, so free the MIB block in
.port_teardown(), which pairs with every successful .port_setup()
including the error unwinds, so the next setup allocates zeroed blocks.
Not carrying a fix tag since there are no known multi-chip yt921x users.

Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index 33e5fc127244..fd737c3e2e18 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -1994,11 +1994,11 @@ static void yt921x_dsa_port_teardown(struct dsa_switch *ds, int port)
 	struct yt921x_port *pp = &priv->ports[port];
 	struct yt921x_mib *pm = pp->mib;
 
-	/* get_stats64() might not be synchronized with port_teardown(), hold
-	 * the MIB block till the device teardown
-	 */
-	if (pm)
+	if (pm) {
 		disable_delayed_work_sync(&pm->work);
+		pp->mib = NULL;
+		kvfree(pm);
+	}
 }
 
 static int yt921x_dsa_port_setup(struct dsa_switch *ds, int port)
@@ -2006,12 +2006,11 @@ static int yt921x_dsa_port_setup(struct dsa_switch *ds, int port)
 	struct yt921x_priv *priv = dsa_to_yt921x_priv(ds);
 	struct yt921x_port *pp = &priv->ports[port];
 	const struct yt921x_info *info = priv->info;
-	struct device *dev = yt921x_priv_to_device(priv);
 	struct yt921x_mib *pm = pp->mib;
 	int res;
 
 	if (!pm && (BIT(port) & yt921x_info_ports_mask(info))) {
-		pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL);
+		pm = kvzalloc_obj(*pm);
 		if (!pm)
 			return -ENOMEM;
 		pp->mib = pm;
@@ -2019,10 +2018,6 @@ static int yt921x_dsa_port_setup(struct dsa_switch *ds, int port)
 		pm->port = pp;
 		u64_stats_init(&pm->syncp);
 		INIT_DELAYED_WORK(&pm->work, yt921x_mib_poll);
-		/* Start disabled, so that the enable below always pairs with
-		 * either this disable or the one from a previous teardown
-		 */
-		disable_delayed_work_sync(&pm->work);
 	}
 
 	mutex_lock(&priv->reg_lock);
@@ -2031,9 +2026,6 @@ static int yt921x_dsa_port_setup(struct dsa_switch *ds, int port)
 	if (res)
 		return res;
 
-	if (pm)
-		enable_delayed_work(&pm->work);
-
 	return 0;
 }
 
-- 
2.53.0


             reply	other threads:[~2026-11-08 10:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-08 10:15 David Yang [this message]
2026-11-08 10:22 ` netdev-bot+sinfo
2026-11-08 10:33   ` David Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261108101648.1308271-1-mmyangfl@gmail.com \
    --to=mmyangfl@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®