[PATCH 2/3] PCI: microchip: Fix ECAM config window use-after-free

[Hongyan Xu <getshell@seu.edu.cn>]

mc_host_probe() calls pci_host_common_probe() but has no ->remove, so an
unbind only runs devres_release_all(): gen_pci_unmap_cfg() ->
pci_ecam_free() frees the ECAM config window while the bus tree stays
registered - only pci_remove_bus() unlinks a bus, and only
pci_host_common_remove() reaches it for a root bus.  The next config access
is a use-after-free in pci_ecam_map_bus(), which reads cfg->ops->bus_shift.
Trigger: overlay rmdir in configfs, not rmmod (builtin_platform_driver()).

Fix: add .remove = pci_host_common_remove, as pci-host-generic.c does since
commit 01fcb7f777a9 ("PCI: Add support for unbinding the generic PCI host
controller"), so pci_remove_root_bus() unlinks the bus before devres frees
cfg.  Scope: the PLDA IRQ domains it creates are not devres managed and
stay unreleased - a separate, pre-existing issue.

Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
---
 drivers/pci/controller/plda/pcie-microchip-host.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 24bbf93b8051..f7b75013d9fc 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -821,6 +821,7 @@ MODULE_DEVICE_TABLE(of, mc_pcie_of_match);
 
 static struct platform_driver mc_pcie_driver = {
 	.probe = mc_host_probe,
+	.remove = pci_host_common_remove,
 	.driver = {
 		.name = "microchip-pcie",
 		.of_match_table = mc_pcie_of_match,
-- 
2.50.1.windows.1