[PATCH net-next v5 0/7] net: dsa: motorcomm: Add BR_FLOOD and BR_MCAST_FLOOD support

[David Yang <mmyangfl@gmail.com>]

Offload BR_FLOOD / BR_MCAST_FLOOD to the hardware for bridges when
feasible.

v5:
  - drop patch 3 of preexisting issue
  - fix issues found by sashiko
  - program RMA registers
v4: https://lore.kernel.org/r/20261107121631.1040612-1-mmyangfl@gmail.com
  - fix VID 0 handling
  - reset port flags on bridge leaving
  - remove local cpu_ports_mask
  - translate FDB VID for VLAN-unaware bridges
  - limit offloading to exactly one bridge
v3: https://lore.kernel.org/r/20261103140109.874443-1-mmyangfl@gmail.com
  - refactor port isolation and filter action for standalone ports
  - recompute flags when a port leaves bridge
  - honor BR_HAIRPIN
v2: https://lore.kernel.org/r/20261011030228.2761810-1-mmyangfl@gmail.com
  - fix build error
v1: https://lore.kernel.org/r/20261009005542.72860-1-mmyangfl@gmail.com

David Yang (7):
  net: dsa: motorcomm: Fix VLAN SVL and learn limit definitions
  net: dsa: motorcomm: Drop VID 0 VLAN table programming
  net: dsa: motorcomm: Remove local cpu_ports_mask
  net: dsa: motorcomm: Isolate all ports during chip setup
  net: dsa: motorcomm: Translate FDB VID for VLAN-unaware bridges
  net: dsa: motorcomm: Report inconsistency on bridge join failure
  net: dsa: motorcomm: Support BR_FLOOD and BR_MCAST_FLOOD offloading

 drivers/net/dsa/motorcomm/chip.c | 242 +++++++++++++++++++++++++------
 drivers/net/dsa/motorcomm/chip.h |  21 ++-
 2 files changed, 213 insertions(+), 50 deletions(-)

-- 
2.53.0