mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Martin Belanger via B4 Relay <devnull+martin.nvme.dev.gmail.com@kernel.org>
To: Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@kernel.dk>,
	 Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>,
	 Hannes Reinecke <hare@kernel.org>
Cc: Martin Belanger <martin.nvme.dev@gmail.com>,
	 linux-nvme@lists.infradead.org, linux-kernel@vger.kernel.org,
	 Martin Belanger <martin.belanger@dell.com>,
	stable@vger.kernel.org
Subject: [PATCH 2/2] nvme-tcp: consume TLS records without application data
Date: Mon, 09 Nov 2026 14:04:54 -0500	[thread overview]
Message-ID: <20261109-nvme-tcp-live-ctrlrec-v1-2-47ba61670e65@gmail.com> (raw)
In-Reply-To: <20261109-nvme-tcp-live-ctrlrec-v1-0-47ba61670e65@gmail.com>

From: Martin Belanger <martin.belanger@dell.com>

A peer may send a TLS record without application data at any time
after the handshake: a NewSessionTicket, a KeyUpdate or an alert.
tls_sw_read_sock() cannot pass such a record to nvme_tcp_recv_skb().
It returns -EINVAL and leaves the record at the head of the receive
queue. nvme_tcp_try_recv() then starts error recovery, and the
controller reconnects.

TLS 1.3 allows a server to send a NewSessionTicket at any time after
the handshake (RFC 8446, section 4.6.1). Alerts can also arrive at any
time.

On -EINVAL, read the record with recvmsg(), which reports the record
type. Discard handshake messages other than KeyUpdate. Log alerts, and
fail the queue on a fatal alert. Fail the queue on a KeyUpdate, which
nvme-tcp cannot answer, and on any other record type. recvmsg() takes
the socket lock, so release it around the read.

svc_tcp_recvfrom() in sunrpc handles -EINVAL from read_sock() the same
way.

Fixes: be8e82caa685 ("nvme-tcp: enable TLS handshake upcall")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Belanger <martin.belanger@dell.com>
---
 drivers/nvme/host/tcp.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index bf71e6f6a6ef..d460273a328a 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1444,6 +1444,8 @@ static int nvme_tcp_try_send(struct nvme_tcp_queue *queue)
 	return ret;
 }
 
+static int nvme_tcp_recv_tls_record(struct nvme_tcp_queue *queue);
+
 static int nvme_tcp_try_recv(struct nvme_tcp_queue *queue)
 {
 	struct socket *sock = queue->sock;
@@ -1456,6 +1458,18 @@ static int nvme_tcp_try_recv(struct nvme_tcp_queue *queue)
 	lock_sock(sk);
 	queue->nr_cqe = 0;
 	consumed = sock->ops->read_sock(sk, &rd_desc, nvme_tcp_recv_skb);
+	/*
+	 * kTLS cannot pass a TLS record without application data to
+	 * nvme_tcp_recv_skb(). It returns -EINVAL and leaves the record at
+	 * the head of the receive queue. recvmsg() takes the socket lock,
+	 * so read the record without it.
+	 */
+	if (unlikely(consumed == -EINVAL && nvme_tcp_queue_tls(queue) &&
+		     queue->rd_enabled)) {
+		release_sock(sk);
+		consumed = nvme_tcp_recv_tls_record(queue);
+		lock_sock(sk);
+	}
 	/*
 	 * nvme_tcp_recv_skb() handles its own errors, so a queue that is
 	 * still enabled failed inside read_sock(). Handle it before
@@ -1659,6 +1673,78 @@ static int nvme_tcp_drain_tls_record(struct nvme_tcp_queue *queue,
 	return drained;
 }
 
+/*
+ * Read the TLS record that read_sock() could not pass to
+ * nvme_tcp_recv_skb(). The caller must not hold the socket lock.
+ *
+ * A KeyUpdate needs new keys that nothing here can supply. Other handshake
+ * messages, such as a NewSessionTicket, are discarded.
+ *
+ * Returns the bytes consumed, or a negative errno if the connection cannot
+ * continue.
+ */
+static int nvme_tcp_recv_tls_record(struct nvme_tcp_queue *queue)
+{
+	u8 buf[NVME_TCP_TLS_REC_CHUNK];
+	char cbuf[CMSG_LEN(sizeof(char))] = {};
+	struct kvec iov = {
+		.iov_base = buf,
+		.iov_len = sizeof(buf),
+	};
+	struct msghdr msg = {
+		.msg_control = cbuf,
+		.msg_controllen = sizeof(cbuf),
+	};
+	int len, ret;
+	u8 ctype;
+
+	len = kernel_recvmsg(queue->sock, &msg, &iov, 1, sizeof(buf),
+			     MSG_DONTWAIT);
+	if (len <= 0) {
+		dev_err(queue->ctrl->ctrl.device,
+			"queue %d: failed to read TLS record: %d\n",
+			nvme_tcp_queue_id(queue), len);
+		goto fail;
+	}
+
+	ctype = tls_get_record_type(queue->sock->sk, (struct cmsghdr *)cbuf);
+	switch (ctype) {
+	case TLS_RECORD_TYPE_HANDSHAKE:
+		if (buf[0] == TLS_HANDSHAKE_KEYUPDATE) {
+			dev_err(queue->ctrl->ctrl.device,
+				"queue %d: peer sent a TLS KeyUpdate, which is not supported\n",
+				nvme_tcp_queue_id(queue));
+			return -EKEYEXPIRED;
+		}
+		break;
+	case TLS_RECORD_TYPE_ALERT:
+		ret = nvme_tcp_recv_tls_alert(queue, &msg, len);
+		if (ret)
+			return ret;
+		break;
+	default:
+		dev_err(queue->ctrl->ctrl.device,
+			"queue %d: unexpected TLS record %u\n",
+			nvme_tcp_queue_id(queue), ctype);
+		return -EPROTO;
+	}
+
+	ret = nvme_tcp_drain_tls_record(queue, &msg, MSG_DONTWAIT);
+	if (ret < 0) {
+		len = ret;
+		goto fail;
+	}
+
+	return len + ret;
+
+fail:
+	/* read_sock() left a whole record, so none of it can be missing */
+	if (len == -EAGAIN)
+		return -EPROTO;
+
+	return len ? : -ECONNRESET;
+}
+
 /*
  * Discard a TLS record that arrived in place of the ICResp. A peer may send
  * a NewSessionTicket as soon as the handshake completes.

-- 
2.53.0



  parent reply	other threads:[~2026-11-09 19:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-09 19:04 [PATCH 0/2] nvme-tcp: consume TLS records without application data on a live queue Martin Belanger via B4 Relay
2026-11-09 19:04 ` [PATCH 1/2] nvme-tcp: move the TLS record read loop into a helper Martin Belanger via B4 Relay
     [not found]   ` <sashiko-outbox-205465@kernel.org>
2026-11-09 19:30     ` Martin Belanger
2026-11-09 19:04 ` Martin Belanger via B4 Relay [this message]
     [not found]   ` <sashiko-outbox-205483@kernel.org>
2026-11-09 19:36     ` [PATCH 2/2] nvme-tcp: consume TLS records without application data Martin Belanger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261109-nvme-tcp-live-ctrlrec-v1-2-47ba61670e65@gmail.com \
    --to=devnull+martin.nvme.dev.gmail.com@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=hare@kernel.org \
    --cc=hch@lst.de \
    --cc=kbusch@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=martin.belanger@dell.com \
    --cc=martin.nvme.dev@gmail.com \
    --cc=sagi@grimberg.me \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®