From: Yuya Kusakabe <yuya.kusakabe@gmail.com>
To: Andrea Mayer <andrea.mayer@uniroma2.it>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Gabriel Goller <g.goller@proxmox.com>,
Yuya Kusakabe <yuya.kusakabe@gmail.com>
Subject: [PATCH net-next v5 2/2] seg6: skip the route refcount in seg6local IPv4 lookups
Date: Mon, 09 Nov 2026 09:10:15 +0900 [thread overview]
Message-ID: <20261109-seg6-lookup-noref-v5-2-96dc6a652c7e@gmail.com> (raw)
In-Reply-To: <20261109-seg6-lookup-noref-v5-0-96dc6a652c7e@gmail.com>
ip_route_input() looks the input route up with ip_route_input_noref()
and then forces a reference on it, which is dropped again when the
packet is transmitted. End.DX4 and End.DT4 call it and hand the skb
to dst_input() within one RCU read-side section: the one of the
receive path, or that of the nfnetlink verdict handler for a packet
reinjected from NFQUEUE.
Use ip_route_input_noref(), as ip_rcv_finish() does.
Throughput at 0.5% packet loss of 82-byte IPv4-in-IPv6 UDP packets
(no SRH), spread by RSS on an ixgbe 82599ES across two 10-core Xeon
E5-2650 v3, offered by TRex over 10 runs of 10 s, in Mpps:
End.DX4
queues cores before after
1 1 0.791 0.811 (+2.5%)
10 10 on the NIC's socket 6.118 7.394 (+20.9%)
16 10 + 6 on two sockets 3.305 10.205 (+208.8%)
End.DT4
queues cores before after
1 1 0.481 0.489 (+1.6%)
10 10 on the NIC's socket 4.328 4.588 (+6.0%)
16 10 + 6 on two sockets 3.351 7.153 (+113.5%)
Every CPU takes and drops a reference on the same input route, the
one cached on the nexthop. At 16 queues that cache line bounces
between the sockets, and skb_dst_force() and dst_release() together
take more than half of the cycles for End.DX4 and over 40% for End.DT4.
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
---
net/ipv6/seg6_local.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv6/seg6_local.c b/net/ipv6/seg6_local.c
index 7fbcf590297d..209e31c21e33 100644
--- a/net/ipv6/seg6_local.c
+++ b/net/ipv6/seg6_local.c
@@ -1096,7 +1096,7 @@ static int input_action_end_dx4_finish(struct net *net, struct sock *sk,
skb_dst_drop(skb);
- reason = ip_route_input(skb, nhaddr, iph->saddr, 0, skb->dev);
+ reason = ip_route_input_noref(skb, nhaddr, iph->saddr, 0, skb->dev);
if (reason) {
kfree_skb_reason(skb, reason);
return -EINVAL;
@@ -1322,7 +1322,7 @@ static int input_action_end_dt4(struct sk_buff *skb,
iph = ip_hdr(skb);
- reason = ip_route_input(skb, iph->daddr, iph->saddr, 0, skb->dev);
+ reason = ip_route_input_noref(skb, iph->daddr, iph->saddr, 0, skb->dev);
if (unlikely(reason))
goto drop;
--
2.50.1
next prev parent reply other threads:[~2026-11-09 0:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 0:10 [PATCH net-next v5 0/2] seg6: skip route refcounts in seg6local lookups Yuya Kusakabe
2026-11-09 0:10 ` [PATCH net-next v5 1/2] seg6: skip the route refcount in seg6local IPv6 lookups Yuya Kusakabe
2026-11-09 0:10 ` Yuya Kusakabe [this message]
2026-11-10 8:54 ` [PATCH net-next v5 2/2] seg6: skip the route refcount in seg6local IPv4 lookups Hangbin Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261109-seg6-lookup-noref-v5-2-96dc6a652c7e@gmail.com \
--to=yuya.kusakabe@gmail.com \
--cc=andrea.mayer@uniroma2.it \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=g.goller@proxmox.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®