From: Gaurav Suman via B4 Relay <devnull+gauravsuman007.gmail.com@kernel.org>
To: Bryan O'Donoghue <bod@kernel.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Loic Poulain <loic.poulain@oss.qualcomm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Gaurav Suman <gauravsuman007@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/8] dt-bindings: media: Add qcom,sm8150-camss
Date: Mon, 09 Nov 2026 22:38:19 +0000 [thread overview]
Message-ID: <20261109-sm8150-camera-v1-1-3d2e7b407516@gmail.com> (raw)
In-Reply-To: <20261109-sm8150-camera-v1-0-3d2e7b407516@gmail.com>
From: Gaurav Suman <gauravsuman007@gmail.com>
Add bindings for the camera subsystem on the Qualcomm SM8150
(Titan 175): four CSIPHYs, two CSIDs and two VFEs, plus two lite
CSID/VFE pairs. Like the SDM670 binding, only the CAMSS core blocks
are described.
SM8150's camera clock controller has no SOC_AHB branch clock; the
slow AHB clock source is listed instead, as the downstream driver
does.
This was written and tested with the help of an AI coding assistant
(Claude Opus 5.5, Anthropic); I reviewed the change and the results.
Signed-off-by: Gaurav Suman <gauravsuman007@gmail.com>
---
.../bindings/media/qcom,sm8150-camss.yaml | 389 +++++++++++++++++++++
1 file changed, 389 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8150-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8150-camss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..e13bcd8d48adfbc400b4e95520fb950f9577585d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8150-camss.yaml
@@ -0,0 +1,389 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8150-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Camera Subsystem (CAMSS)
+
+maintainers:
+ - Gaurav Suman <gauravsuman007@gmail.com>
+
+description:
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. On
+ SM8150 (Titan 175) it has four CSIPHYs, two CSIDs and two VFEs plus two
+ lite CSID/VFE pairs.
+
+properties:
+ compatible:
+ const: qcom,sm8150-camss
+
+ reg:
+ maxItems: 12
+
+ reg-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid_lite0
+ - const: csid_lite1
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+ clocks:
+ maxItems: 27
+
+ clock-names:
+ items:
+ - const: gcc_ahb
+ - const: gcc_axi_hf
+ - const: camnoc_axi
+ - const: cpas_ahb
+ - const: slow_ahb_src
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: vfe0
+ - const: vfe0_axi
+ - const: vfe0_cphy_rx
+ - const: vfe0_csid
+ - const: vfe1
+ - const: vfe1_axi
+ - const: vfe1_cphy_rx
+ - const: vfe1_csid
+ - const: vfe_lite0
+ - const: vfe_lite0_cphy_rx
+ - const: vfe_lite0_csid
+ - const: vfe_lite1
+ - const: vfe_lite1_cphy_rx
+ - const: vfe_lite1_csid
+
+ interrupts:
+ maxItems: 12
+
+ interrupt-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid_lite0
+ - const: csid_lite1
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: ahb
+ - const: hf_0
+
+ iommus:
+ maxItems: 8
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: top
+
+ vdd-csiphy-1p2-supply:
+ description:
+ Phandle to a 1.2V regulator supply to CSI PHYs.
+
+ vdd-csiphy-1p8-supply:
+ description:
+ Phandle to a 1.8V regulator supply to CSI PHYs pll block.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY0.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY1.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY2.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY3.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - interconnects
+ - interconnect-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - vdd-csiphy-1p2-supply
+ - vdd-csiphy-1p8-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,sm8150-camcc.h>
+ #include <dt-bindings/interconnect/qcom,sm8150.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ isp@acb3000 {
+ compatible = "qcom,sm8150-camss";
+
+ reg = <0x0 0x0acb3000 0x0 0x1000>,
+ <0x0 0x0acba000 0x0 0x1000>,
+ <0x0 0x0acc8000 0x0 0x1000>,
+ <0x0 0x0accf000 0x0 0x1000>,
+ <0x0 0x0ac65000 0x0 0x1000>,
+ <0x0 0x0ac66000 0x0 0x1000>,
+ <0x0 0x0ac67000 0x0 0x1000>,
+ <0x0 0x0ac68000 0x0 0x1000>,
+ <0x0 0x0acaf000 0x0 0x4000>,
+ <0x0 0x0acb6000 0x0 0x4000>,
+ <0x0 0x0acc4000 0x0 0x4000>,
+ <0x0 0x0accb000 0x0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
+ clock-names = "gcc_ahb",
+ "gcc_axi_hf",
+ "camnoc_axi",
+ "cpas_ahb",
+ "slow_ahb_src",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "vfe0",
+ "vfe0_axi",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1",
+ "vfe1_axi",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid";
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "ahb", "hf_0";
+
+ iommus = <&apps_smmu 0x840 0x620>,
+ <&apps_smmu 0x860 0x620>,
+ <&apps_smmu 0xa40 0x620>,
+ <&apps_smmu 0xa60 0x620>,
+ <&apps_smmu 0xc40 0x620>,
+ <&apps_smmu 0xc60 0x620>,
+ <&apps_smmu 0xe40 0x620>,
+ <&apps_smmu 0xe60 0x620>;
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+ power-domain-names = "ife0", "ife1", "top";
+
+ vdd-csiphy-1p2-supply = <&vreg_l3c_1p2>;
+ vdd-csiphy-1p8-supply = <&vreg_l1c_1p8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csiphy_ep0: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
--
2.49.1
next prev parent reply other threads:[~2026-11-09 22:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 22:38 [PATCH 0/8] Add SM8150 CAMSS and LG G8x ThinQ camera sensors Gaurav Suman via B4 Relay
2026-11-09 22:38 ` Gaurav Suman via B4 Relay [this message]
2026-11-09 22:38 ` [PATCH 2/8] media: qcom: camss: Add SM8150 support Gaurav Suman via B4 Relay
2026-11-09 22:38 ` [PATCH 3/8] dt-bindings: media: i2c: Add Samsung S5K3M3 image sensor Gaurav Suman via B4 Relay
2026-11-09 22:38 ` [PATCH 4/8] media: i2c: Add Samsung S5K3M3 image sensor driver Gaurav Suman via B4 Relay
2026-11-09 22:38 ` [PATCH 5/8] dt-bindings: media: i2c: Add Samsung S5KGD1 image sensor Gaurav Suman via B4 Relay
2026-11-09 22:38 ` [PATCH 6/8] media: i2c: Add Samsung S5KGD1 image sensor driver Gaurav Suman via B4 Relay
2026-11-09 22:38 ` [PATCH 7/8] dt-bindings: media: i2c: Add ON Semiconductor LC898123F40 Gaurav Suman via B4 Relay
2026-11-09 22:38 ` [PATCH 8/8] media: i2c: Add ON Semiconductor LC898123F40 lens autofocus driver Gaurav Suman via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261109-sm8150-camera-v1-1-3d2e7b407516@gmail.com \
--to=devnull+gauravsuman007.gmail.com@kernel.org \
--cc=bod@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gauravsuman007@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®