[PATCH 2/3] drm/xe: Remove driver side resource assignment after BAR resize

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

pci_resize_resource() assigns the resized BAR and the other BARs it
released, or restores the original configuration on failure. Calling
pci_assign_unassigned_bus_resources() after it is redundant. If that
call manages to assign more resources in some scenario, the problem
should be fixed inside pci_resize_resource() instead.

Remove the pci_assign_unassigned_bus_resources() call from
xe_pci_rebar_resize().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/gpu/drm/xe/xe_pci_rebar.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_pci_rebar.c b/drivers/gpu/drm/xe/xe_pci_rebar.c
index 7e2c7079b6ff..f47b3c039abd 100644
--- a/drivers/gpu/drm/xe/xe_pci_rebar.c
+++ b/drivers/gpu/drm/xe/xe_pci_rebar.c
@@ -100,7 +100,5 @@ void xe_pci_rebar_resize(struct xe_device *xe)
 	pci_write_config_dword(pdev, PCI_COMMAND, pci_cmd & ~PCI_COMMAND_MEMORY);
 
 	resize_bar(xe, LMEM_BAR, rebar_size);
-
-	pci_assign_unassigned_bus_resources(pdev->bus);
 	pci_write_config_dword(pdev, PCI_COMMAND, pci_cmd);
 }
-- 
2.47.3