mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Simon Horman <horms@kernel.org>
To: Wentao Liang <vulab@iscas.ac.cn>
Cc: Bryan Whitehead <bryan.whitehead@microchip.com>,
	UNGLinuxDriver@microchip.com, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH] net: lan743x: disconnect the PHY when PTP setup fails
Date: Mon, 9 Nov 2026 16:37:15 +0000	[thread overview]
Message-ID: <20261109163715.GQ18859@horms.kernel.org> (raw)
In-Reply-To: <20261103102852.1340530-1-vulab@iscas.ac.cn>

On Tue, Nov 03, 2026 at 10:28:52AM +0000, Wentao Liang wrote:
> lan743x_netdev_open() connects the PHY before opening PTP, but if
> lan743x_ptp_open() fails it jumps to close_mac, which skips
> lan743x_phylink_disconnect(). The reference taken by
> phylink_connect_phy() is then never released, and the PHY stays
> attached to the phylink instance.
> 
> Add a close_phylink label in front of the phylink disconnect, as the
> pre-phylink conversion code did with close_phy, and use it on the
> lan743x_ptp_open() failure path.
> 
> Fixes: a5f199a8d8a0 ("net: lan743x: Migrate phylib to phylink")
> Cc: stable@vger.kernel.org
> Assisted-by: DeepSeek-V4.1-Flash and OpenAI Codex
> Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
> ---
>  drivers/net/ethernet/microchip/lan743x_main.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
> index 82d3ec20ba25..390aec639c71 100644
> --- a/drivers/net/ethernet/microchip/lan743x_main.c
> +++ b/drivers/net/ethernet/microchip/lan743x_main.c
> @@ -3331,7 +3331,7 @@ static int lan743x_netdev_open(struct net_device *netdev)
>  
>  	ret = lan743x_ptp_open(adapter);
>  	if (ret)
> -		goto close_mac;
> +		goto close_phylink;
>  
>  	lan743x_rfe_open(adapter);
>  
> @@ -3374,6 +3374,8 @@ static int lan743x_netdev_open(struct net_device *netdev)
>  			lan743x_rx_close(&adapter->rx[index]);
>  	}
>  	lan743x_ptp_close(adapter);
> +
> +close_phylink:

It seems odd that basically this unwind logic existed before the
cited patch - even if the internals of the unwind differed - but
was removed by it. And yet, the unwind happens for other cases.

>  	if (adapter->phylink)

As an aside, I don't believe adapter->phylink can ever be NULL here.

>  		lan743x_phylink_disconnect(adapter);

Please do answer the email from netdev-bot+sinfo requesting,
elsewhere in this email thread, information about the providence of
this patch.

The above not withstanding, this looks good to me.

Reviewed-by: Simon Horman <horms@kernel.org>


      parent reply	other threads:[~2026-11-09 16:37 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-03 10:28 Wentao Liang
2026-11-03 10:33 ` netdev-bot+sinfo
2026-11-03 10:40 ` Krzysztof Kozlowski
2026-11-03 11:11 ` Krzysztof Kozlowski
2026-11-09 16:37 ` Simon Horman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261109163715.GQ18859@horms.kernel.org \
    --to=horms@kernel.org \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=bryan.whitehead@microchip.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    --cc=vulab@iscas.ac.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®