[RFC PATCH 07/11] pcmcia: yenta_socket: Always select CARDBUS

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

YENTA selects CARDBUS unless EXPERT is set, so with EXPERT, yenta_socket
can be used without CARDBUS to support 16-bit PC Cards in the slot of a
CardBus bridge. An upcoming change makes the PCI core ignore CardBus
bridges when CONFIG_CARDBUS is not set effectively removing "partial
CardBus support" from kernel, which leaves yenta_socket with no device
to bind to.

Select CARDBUS also when EXPERT is set.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: linux-kernel@vger.kernel.org

 drivers/pcmcia/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index d1d25aa296ad..92c34553b1ba 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -73,7 +73,7 @@ comment "PC-card bridges"
 config YENTA
 	tristate "CardBus yenta-compatible bridge support"
 	depends on PCI
-	select CARDBUS if !EXPERT
+	select CARDBUS
 	select PCCARD_NONSTATIC if PCMCIA != n
 	help
 	  This option enables support for CardBus host bridges.  Virtually
-- 
2.47.3