[PATCH v2 1/2] media: aspeed: join IRQ and work before probe cleanup

[Myeonghun Pak <mhun512@gmail.com>]

The setup failure path unprepares the clocks before devres frees the IRQ.
An IRQ handler that has sampled an enabled status can still queue
resolution work. Masking the source does not synchronize that handler.

Save the IRQ number after a successful request, then free the action and
drain resolution work before the manual JPEG and clock cleanup. Turn the
engine off after the work has finished. Request the IRQ after reset,
clock and JPEG initialization so earlier init failures have no live IRQ.

Fixes: 3536169f8531 ("media: aspeed: fix clock handling logic")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
No hardware testing.

With reset-default masking, no probe IRQ failure has been demonstrated;
this part hardens cleanup ordering.

Changes in v2:
- Join the IRQ and resolution work before manual probe-failure cleanup.
- Rebase onto managed reserved-memory initialization.
- Clean up JPEG and clocks if the late IRQ request fails.
- Split normal last-close ordering into patch 2.

 drivers/media/platform/aspeed/aspeed-video.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/aspeed/aspeed-video.c b/drivers/media/platform/aspeed/aspeed-video.c
--- a/drivers/media/platform/aspeed/aspeed-video.c
+++ b/drivers/media/platform/aspeed/aspeed-video.c
@@ -308,6 +308,7 @@
  * perf:		holds the statistics primary for debugfs
  */
 struct aspeed_video {
+	int irq;
 	void __iomem *base;
 	struct clk *eclk;
 	struct clk *vclk;
@@ -2232,14 +2233,6 @@
 		return -ENODEV;
 	}
 
-	rc = devm_request_threaded_irq(dev, irq, NULL, aspeed_video_irq,
-				       IRQF_ONESHOT, DEVICE_NAME, video);
-	if (rc < 0) {
-		dev_err(dev, "Unable to request IRQ %d\n", irq);
-		return rc;
-	}
-	dev_info(video->dev, "irq %d\n", irq);
-
 	video->reset = devm_reset_control_get(dev, NULL);
 	if (IS_ERR(video->reset)) {
 		dev_err(dev, "Unable to get reset\n");
@@ -2286,8 +2279,19 @@
 
 	aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
 
+	rc = devm_request_threaded_irq(dev, irq, NULL, aspeed_video_irq,
+				       IRQF_ONESHOT, DEVICE_NAME, video);
+	if (rc < 0) {
+		dev_err(dev, "Unable to request IRQ %d\n", irq);
+		goto err_free_jpeg;
+	}
+	video->irq = irq;
+	dev_info(video->dev, "irq %d\n", irq);
+
 	return 0;
 
+err_free_jpeg:
+	aspeed_video_free_buf(video, &video->jpeg);
 err_unprepare_vclk:
 	clk_unprepare(video->vclk);
 err_unprepare_eclk:
@@ -2341,6 +2345,10 @@
 
 	rc = aspeed_video_setup_video(video);
 	if (rc) {
+		set_bit(VIDEO_STOPPED, &video->flags);
+		devm_free_irq(video->dev, video->irq, video);
+		cancel_delayed_work_sync(&video->res_work);
+		aspeed_video_off(video);
 		aspeed_video_free_buf(video, &video->jpeg);
 		clk_unprepare(video->vclk);
 		clk_unprepare(video->eclk);