From: Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
To: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Paul Kocialkowski <paulk@sys-base.io>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Hans Verkuil <hverkuil@kernel.org>,
Arun Iyengar <aiyengar1990@gmail.com>
Subject: [PATCH RFC 08/10] media: v4l2-hevc-enc: Add QP limits for the I pictures
Date: Tue, 10 Nov 2026 10:07:38 +0000 [thread overview]
Message-ID: <20261110-hevc-encode-uapi-v1-8-38ae9fcfedd4@gmail.com> (raw)
In-Reply-To: <20261110-hevc-encode-uapi-v1-0-38ae9fcfedd4@gmail.com>
From: Arun Iyengar <aiyengar1990@gmail.com>
The frame rate control of the core limits all pictures to the range of
V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP and V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP. The
I pictures, coded several QP steps below the P pictures, then reach very
low QP values at high bitrates, where they cost many bits for little
quality.
Take the limits of the I pictures from V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP
and V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP when the driver has them, with
a frame rate control. Without these controls, nothing changes.
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
drivers/media/v4l2-core/v4l2-hevc-enc.c | 24 +++++++++++++++++++++---
include/media/v4l2-hevc-enc.h | 7 +++++++
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-hevc-enc.c b/drivers/media/v4l2-core/v4l2-hevc-enc.c
index a167c4af6288..2e0ba832b868 100644
--- a/drivers/media/v4l2-core/v4l2-hevc-enc.c
+++ b/drivers/media/v4l2-core/v4l2-hevc-enc.c
@@ -645,6 +645,12 @@ static void prepare_rc(struct v4l2_hevc_enc *enc,
state->qp_min = enc_ctrl_val(enc, V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP,
-qp_bd_offset);
state->qp_max = enc_ctrl_val(enc, V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP, 51);
+ state->qp_min_i = enc_ctrl_val(enc,
+ V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP,
+ state->qp_min);
+ state->qp_max_i = enc_ctrl_val(enc,
+ V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP,
+ state->qp_max);
state->qp_i = enc_ctrl_val(enc, V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP, 30);
state->qp_p = enc_ctrl_val(enc, V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP,
state->qp_i);
@@ -1072,10 +1078,23 @@ static bool rc_core_cbr(const struct v4l2_hevc_enc *enc,
!(enc->rc_ops && enc->rc_ops->estimate);
}
+/* QP limits of the picture: the I picture ones with a frame rate control */
+static int rc_clamp_qp(const struct v4l2_hevc_enc_state *state, int qp)
+{
+ int qp_bd_offset = 6 * state->sps.bit_depth_luma_minus8;
+
+ if (state->frame_rc_enable &&
+ state->encode.slice_type == V4L2_HEVC_SLICE_TYPE_I)
+ qp = clamp(qp, state->qp_min_i, state->qp_max_i);
+ else
+ qp = clamp(qp, state->qp_min, state->qp_max);
+
+ return clamp(qp, -qp_bd_offset, 51);
+}
+
static int rc_step(struct v4l2_hevc_enc *enc)
{
struct v4l2_hevc_enc_state *state = &enc->state_active;
- int qp_bd_offset = 6 * state->sps.bit_depth_luma_minus8;
u8 slice_type = state->encode.slice_type;
unsigned int range;
int qp, ret;
@@ -1114,8 +1133,7 @@ static int rc_step(struct v4l2_hevc_enc *enc)
return ret;
}
- qp = clamp(qp, state->qp_min, state->qp_max);
- enc->qp = clamp(qp, -qp_bd_offset, 51);
+ enc->qp = rc_clamp_qp(state, qp);
return 0;
}
diff --git a/include/media/v4l2-hevc-enc.h b/include/media/v4l2-hevc-enc.h
index 3db131370c56..f1d3da3269f1 100644
--- a/include/media/v4l2-hevc-enc.h
+++ b/include/media/v4l2-hevc-enc.h
@@ -128,6 +128,11 @@ struct v4l2_hevc_enc_ref {
* @frame_rc_enable: V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE
* @qp_min: V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP
* @qp_max: V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP
+ * @qp_min_i: V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP, @qp_min if the driver
+ * has no such control. Limits the I pictures with a frame rate
+ * control instead of @qp_min.
+ * @qp_max_i: V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP, @qp_max if the driver
+ * has no such control
* @qp_i: V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP
* @qp_p: V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP
* @qp_b: V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP
@@ -153,6 +158,8 @@ struct v4l2_hevc_enc_state {
bool frame_rc_enable;
int qp_min;
int qp_max;
+ int qp_min_i;
+ int qp_max_i;
int qp_i;
int qp_p;
int qp_b;
--
2.55.0
next prev parent reply other threads:[~2026-11-10 10:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 10:07 [PATCH RFC 00/10] media: Add a V4L2 HEVC stateless encode uAPI and helpers Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 01/10] media: hevc: Add H.265 syntax definitions Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 02/10] media: uapi: Add HEVC stateless encode support Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 03/10] media: hevc: Add stateless encode RBSP writer Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 04/10] media: hevc: Add KUnit tests for the " Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 05/10] media: hevc: Add stateless encode core Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 06/10] media: hevc: Add KUnit tests for the " Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 07/10] media: v4l2-hevc-enc: Add a constant bitrate mode Arun Iyengar via B4 Relay
2026-11-10 10:07 ` Arun Iyengar via B4 Relay [this message]
2026-11-10 10:07 ` [PATCH RFC 09/10] media: v4l2-hevc-enc: Re-encode oversized pictures Arun Iyengar via B4 Relay
2026-11-10 10:07 ` [PATCH RFC 10/10] media: docs: Document the HEVC stateless encode uAPI Arun Iyengar via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110-hevc-encode-uapi-v1-8-38ae9fcfedd4@gmail.com \
--to=devnull+aiyengar1990.gmail.com@kernel.org \
--cc=aiyengar1990@gmail.com \
--cc=hverkuil@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nicolas.dufresne@collabora.com \
--cc=paulk@sys-base.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®