From: Gregor Herburger <gregor.herburger@linutronix.de>
To: Florian Fainelli <florian.fainelli@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>
Cc: linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Gregor Herburger <gregor.herburger@linutronix.de>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v6 0/5] firmware: raspberrypi: Add support for the tryboot mode
Date: Tue, 10 Nov 2026 14:00:10 +0100 [thread overview]
Message-ID: <20261110-rpi-tryboot-v6-0-56f680ef4734@linutronix.de> (raw)
This adds support for the tryboot mode on Raspberry Pis. As there is no
documentation other than the downstream implementation [0] the
implementation is based on this.
Tested on Raspberry Pi 4 and Raspberry Pi 5.
[0] https://github.com/raspberrypi/linux/commit/eb56da0c1925c07e8929ce4c9fe8aeafa7cb8c7b
---
Changes in v6:
- Rebase onto v7.4-rc2
- Link to v5: https://patch.msgid.link/20261002-rpi-tryboot-v5-0-6294c131e583@linutronix.de
Changes in v5:
- Added patch to add reboot mode to Raspberry Pi 1-4 devicetrees.
- Rebase onto v7.3-rc5
- Link to v4: https://patch.msgid.link/20260904-rpi-tryboot-v4-0-fdee8bc53ff7@linutronix.de
Changes in v4:
- fix use-after-free error by moving devm_add_action_or_reset before devm_add_action_or_reset
- Rebase onto v7.3-rc1
- Link to v3: https://patch.msgid.link/20260707-rpi-tryboot-v3-0-fda82fe7ed76@linutronix.de
Changes in v3:
- fix use-after-free error by using devm_add_action_or_reset
- ensure endianness of magic byte
- refactor reboot mode registration into separate function
- Link to v2: https://patch.msgid.link/20260630-rpi-tryboot-v2-0-f68d2dc6aa27@linutronix.de
Changes in v2:
- Remove unnecessary reboot_mode_unregister().
- dt-binding: restrict to mode-{normal,tryboot} and only allow 32bit value.
- Link to v1: https://patch.msgid.link/20260626-rpi-tryboot-v1-0-490b1c4c4970@linutronix.de
---
Gregor Herburger (5):
firmware: raspberrypi: reorder rpi_firmware_property_tag enum
dt-bindings: raspberrypi,bcm2835-firmware: Include 'reboot-mode.yaml'
firmware: raspberrypi: Add reboot mode support
arm64: dts: broadcom: bcm2712: Add reboot modes to firmware node
arm: dts: broadcom: bcm2835: Add reboot modes to firmware node
.../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 9 +++++
arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi | 2 ++
.../boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi | 2 ++
drivers/firmware/Kconfig | 2 ++
drivers/firmware/raspberrypi.c | 40 +++++++++++++++++++---
include/soc/bcm2835/raspberrypi-firmware.h | 22 ++++++------
6 files changed, 62 insertions(+), 15 deletions(-)
---
base-commit: b3dfbde62cf1981c4638939c159dfd087b7a72e9
change-id: 20260623-rpi-tryboot-4292c92b0727
Best regards,
--
Gregor Herburger <gregor.herburger@linutronix.de>
next reply other threads:[~2026-11-10 13:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 13:00 Gregor Herburger [this message]
2026-11-10 13:00 ` [PATCH v6 1/5] firmware: raspberrypi: reorder rpi_firmware_property_tag enum Gregor Herburger
2026-11-14 3:27 ` Florian Fainelli
2026-11-10 13:00 ` [PATCH v6 2/5] dt-bindings: raspberrypi,bcm2835-firmware: Include 'reboot-mode.yaml' Gregor Herburger
2026-11-14 3:27 ` Florian Fainelli
2026-11-10 13:00 ` [PATCH v6 3/5] firmware: raspberrypi: Add reboot mode support Gregor Herburger
2026-11-10 13:00 ` [PATCH v6 4/5] arm64: dts: broadcom: bcm2712: Add reboot modes to firmware node Gregor Herburger
2026-11-14 3:31 ` Florian Fainelli
2026-11-10 13:00 ` [PATCH v6 5/5] arm: dts: broadcom: bcm2835: " Gregor Herburger
2026-11-14 3:31 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110-rpi-tryboot-v6-0-56f680ef4734@linutronix.de \
--to=gregor.herburger@linutronix.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=florian.fainelli@broadcom.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=rjui@broadcom.com \
--cc=robh@kernel.org \
--cc=sbranden@broadcom.com \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®