From: Christopher de Guzman <christopher.deguzman@analog.com>
To: Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>
Cc: <linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>,
Christopher de Guzman <christopher.deguzman@analog.com>
Subject: [PATCH v2 0/4] hwmon: (pmbus/ltc2978) Add support for LT7175 and LT7176P
Date: Tue, 10 Nov 2026 18:00:39 +0800 [thread overview]
Message-ID: <20261110-upstream-lt7175-lt7176p-v2-0-dd60d28383bf@analog.com> (raw)
Add support for the LT7175 and LT7176P PMBus buck regulators to the
ltc2978 driver. Both belong to the LT7170 family (MFR_SPECIAL_ID
0x1C1D) and are identified by their PMBUS_IC_DEVICE_ID string.
Patch 2 also changes how LT7170-family chips are identified: the
IC_DEVICE_ID string is matched against ltc2978_id[] instead of using
a strncmp() per chip, as suggested in review. Patch 4 fixes a related
documentation error for LT7170/LT7171.
Tested with LT7175 and LT7171-1 eval boards on a Raspberry Pi 3B. The
chip identification change was tested on a 6.12 kernel because the
board does not run hwmon-next; the series is build-tested on
hwmon-next.
Signed-off-by: Christopher de Guzman <christopher.deguzman@analog.com>
---
Changes in v2:
- Drop the -1 variants from the bindings and the i2c/of tables (Guenter)
- Add lt7175/lt7176p as case labels on the existing lt7170/lt7171
probe block instead of duplicating it (Guenter)
- Identify LT7170-family chips by matching IC_DEVICE_ID against
ltc2978_id[] with a length check instead of a strncmp() per chip;
this avoids reading past the returned data (Guenter, Sashiko)
- Don't list LT7175/LT7176P under the curr1 "iin" label (Sashiko)
- New patch 4: remove LT7170/LT7171 from the curr1 "iin" label for the
same reason
- Not addressed: ltc_get_max() compares IEEE754 peak values as LINEAR11
(Sashiko). This is pre-existing and also affects LT7170/LT7171; I can
send a separate fix if that is useful.
- Link to v1: https://patch.msgid.link/20261020-upstream-lt7175-lt7176p-v1-0-86b9b728b95d@analog.com
To: Guenter Roeck <linux@roeck-us.net>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Shuah Khan <skhan@linuxfoundation.org>
To: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-hwmon@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
---
Christopher de Guzman (4):
dt-bindings: hwmon: ltc2978: Add support for LT7175 and LT7176P
hwmon: (pmbus/ltc2978) Add support for LT7175 and LT7176P
hwmon: ltc2978: Document LT7175 and LT7176P support
hwmon: ltc2978: Remove LT7170 and LT7171 from curr1 iin documentation
.../devicetree/bindings/hwmon/lltc,ltc2978.yaml | 4 ++-
Documentation/hwmon/ltc2978.rst | 32 +++++++++++++++++-----
drivers/hwmon/pmbus/Kconfig | 6 ++--
drivers/hwmon/pmbus/ltc2978.c | 23 ++++++++++------
4 files changed, 45 insertions(+), 20 deletions(-)
---
base-commit: 0b6eda22f9ab67ddb2a872b0c3fc578ad9f4e27e
change-id: 20261020-upstream-lt7175-lt7176p-b9e37cba8f2d
Best regards,
--
Christopher de Guzman <christopher.deguzman@analog.com>
next reply other threads:[~2026-11-10 10:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 10:00 Christopher de Guzman [this message]
2026-11-10 10:00 ` [PATCH v2 1/4] dt-bindings: hwmon: ltc2978: " Christopher de Guzman
2026-11-11 12:05 ` Krzysztof Kozlowski
2026-11-17 18:41 ` Guenter Roeck
2026-11-10 10:00 ` [PATCH v2 2/4] hwmon: (pmbus/ltc2978) " Christopher de Guzman
2026-11-17 18:42 ` Guenter Roeck
2026-11-10 10:00 ` [PATCH v2 3/4] hwmon: ltc2978: Document LT7175 and LT7176P support Christopher de Guzman
2026-11-17 18:43 ` Guenter Roeck
2026-11-10 10:00 ` [PATCH v2 4/4] hwmon: ltc2978: Remove LT7170 and LT7171 from curr1 iin documentation Christopher de Guzman
2026-11-17 18:44 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110-upstream-lt7175-lt7176p-v2-0-dd60d28383bf@analog.com \
--to=christopher.deguzman@analog.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®